Стрічка новин

Patrick Hagelstein
No idea what's gonna happen but I will follow this with interest!

Wim van der Luijt
Count me in!

Bart Goesaert
me too...

Stefan Schacht
Hi Bernhard, i take a seat 🙂. Cheers Stefan

Bill Gilman
Don't want to miss this one! 🙂

Łukasz Gliński
Never seen such a detailed investigation regarding the Łoś 🙂
What's the source of the pics and infos?

Bernhard Schrock
Cześć Łukaszu. Dzięki za miłe słowa. Pudła z Łosiami leżą w piwnicy tak długo ze aż zapomniałem, że były w nich już blaszki Parta. Kupiłem rok temu drugi zestaw blach no i powiedziałem: teraz albo nigdy. Z "teraz" zrobił się ponad rok, podczas którego szukałem w internecie zdjeć i faktów. A jest tego nadzwyczaj dużo. Mam książkę "Samoloty września" oraz czasopismo z dobrą monografią Łosia. Niedawno natknąłem się w dwóch polskich forach na 2 bardzo ciekawe wątki budowy Łosi: PWM, Kuba Galicki oraz oraz na stronie Modelarstwo z pasją na której modelarz pod pseudonimem Jambus zaczął fenomenalnie budować model ale niestety wątek urywa się na wnętrzu kadłuba. Czy wiesz może, czy pan Jambus swój model skończył? Jak tak to czy jest gdzieś reszta zdjeć z budowy? Pozdrawiam

Łukasz Gliński
Hi Bernhard, thanks a lot for writing in Polish, but I'll stick to English as the messages may be not easy to understand for others (I hope you don't mind, I have the same with German messages 🙂 ). I did a quick research and unfortunately the topic by Jambus is not continued anywhere, but the guy is still active on the forum (last entry yesterday). So either I ping him via PM (yes, I have the login on PWM) or you register there - let me know what suits you best. MfG
PS. I found another unfinished build here: modelwork.com.pl/vie..4fc501f&start=45

MRMLA
OK, it seems to be a great project Bernhard, as always. Good to see Yours tips and tricks! Many thanks!

Patrick Hagelstein
Jawdropping!!! And this is only the tail!....

David Thor
I`m in!

e p
Definetly in!

Bernhard Schrock
Meanwhile both engines, cowlings and propellers are completed.
Rear part of the cowling (see picture 7): yesterday I checked three times all my original pictures and drawings and I don't know still how this area was divided in panels. I only found out that on the upper side was a round acces panel and on the outer side was an opening (drain?). Does anyone know more? Each information and help will be appreciated.

H. Wi
No oob anymore? Slightly detailed this time? 🙂 Looking fwd to Your next masterpiece 🙂

Bernhard Schrock
A little bit progress. Today I reworked the vertical parts, divided them and mounted to the "rest of the tail.

Bernhard Schrock
Today I researched a bit about wings and nacelles. I found out that the shape of the nacelles on upper and lower side is wrong!!!!! I do not wont you do think that I'm counting rivets but these mistakes are a bit to much. I can not understand this mess because this such an important polish plane kit made by a polish company so wrong and the are enough plans. The was a 1:72 kit 40 years ago that was correct in this section. Knowing myself I will either give up the project or invest many many hours correcting and reworking the nacelles.....(see pictures 21-27: right upper corrected).

Vitor Hugo Sousa
your approach to models leave us with no excuse to build whatever we dream. Love them

Patrick Hagelstein
Excellent work Bernard! You tackled this problem very well!

Bill Gilman
Nice work on the nacelles. 👍

Bernhard Schrock
Thank you mates. This was only the first half of the hard "match". I must still play the second half🙂
Left lower side: corrected.

Łukasz Gliński
Hi Bernhard, I had a brief look for the pics of the nacelles in my "Septe Bombers of 1939" book, but there's nothing more than a plan you've got. I hope you'll manage to get them correctly shaped, fingers crossed! MfG

Spanjaard
wow, i am in too.

Łukasz Gliński
This is probably the biggest Łoś investigation ever😉

Bernhard Schrock
Łukasz: thank you, I'm doing my best🙂
After researching the flaps - configuration I had to decide if the very nice etched parts by Part were durable enough. Experience shows that flaps this size completely made of etched parts tend to warp easily. For practical reasons and because they do not really fit the kit I decided to make the base from plastic. Additionally it's possible to shape rivets on the outside (picture 43).

Hanno Kleinecke
This time you're diggin' deeper than ever before ! Absolutely exemplary and impressive.
👍

Bart Goesaert
superb work so far... every build you do is a marvel to follow...

Bernhard Schrock
About two weeks ago I discovered with the help of a plan how the trim tabs on the elevators work (picture 39). Since I finished it I have bin wondering why the mechanics on the upper right side is not visible on any of the original photos... Until I finally realized a few days ago that I misread the plan🙁 Result; today I reworked the already reworked parts🙂

Bernhard Schrock
Result of an good modeling-vacation day: landing gear and bays completed, legs minus brake lines completed.

Vitor Hugo Sousa
i'm divided between insane or inspiring

Bill Gilman
You have the most amazing eye for detail, Bernhard! Outstanding craftsmanship. 👍 👍 👍

Bernhard Schrock
Yesterday I wanted to do anything different than sanding, reshaping and correcting. I decide to use the smaller but to the original closer wheels from S-Model. After painting the wheels dark grey, earth and aluminum now the landing gear is ready for fly.

Patrick Hagelstein
Breathtaking.... Keep up this excellent work Bernhard!

Bernhard Schrock
Oil coolers under the wings in the kit look like made of chewing gum. Fortunately Part designed parts for the 4 coolers in the "Interior set". The small ones should be completed of one base and 16 separate ribs, for the bigger one you must glue 25 ribs to the base inline! Despite great patience I had not managed to glue them together in line. So I tried so sand them in line. It worked well and so I wondered about the strength of the construction. In comparison with the pictures the shape of the ribs is not 100% correct... A little bit of sanding will help.

Adam Gudynowski
Very difficult kit, however your work looks amazing!

Bernhard Schrock
Thx Adam. I suppose you know this "excellent" kit...🙂
Next task completed: flaps.
Middle and outer flap: based on experiences with the inner flaps I made the first and last rib from thin plastic. It became clear that the strength of the connection of the first and last etched rib is not very big. Plastic on plastic is more durable.

Choppa Nutta
Excellent

Hanno Kleinecke
Cutting and fitting all these stringers must have been quite some work, superaccurate looking flaps ! 👍

Bernhard Schrock
In this kit nothing seems right. So why should the rear fuselage cross section and shape be correct?🙂. The cross section in the area of the rear gunner is too oval (in the original approx. trapezoid) and very aft too low.
I decided on an unusual solution. I glued the fuselage halves temporarily together, placed a temporary bulkhead with the correct cross section and bolstered the fuselage with plastic strips and CA glue.

Bernhard Schrock
Unfortunately the inner structure is not done well. The different thickness of the ribs is not existing and the stringers have the same thickness as the ribs. Moreover the pattern is wrong. So the easiest thing is to build the structure completely new. The picture 73 show the result of approx. 1,5 hour of work.

Clifford Keesler
Excellent work as always Bernhard.

Hanno Kleinecke
Attetion to detail par excellence .

Thomas Wirsching
Whow Bernhard große Klasse! I just stumbled into our build and I´m delighted by your skills man! Are you an aircraft engineer? I did finished a PZL-24G kit from MIRAGE last month and can feel your pain. I swore to myself "never any MIRAGE kit again" 😉.

Bernhard Schrock
Yippie yeah!!!! The most time consuming but very important for all later work part (cockpit bottom) is ready!! Time for a break and glas of Chardonnay🙂

Scott Hastings
This is really cool. Impressed with the plastic ribs. How do you get them to bend to be so perfect in contour??

Bernhard Schrock
Thank you Clifford, Hanno, Thomas and Scott.
@Scott:
The stripes are "cold bended" over an edge before gluing. Further I used for positioning the stripes normally plastic glue and for finally gluing ethyl acetate. Thanks to this technique I can still repositioned slightly the glued stripes.

Scott Hastings
Thanks for responding. It really is superb, I am very impressed with your skills

Bart Goesaert
i wish I had a little bit of your skills... but it is nice work you show here...

Kees Kleijwegt
Amazing work, as always! 🙂

Stefan Schacht
Hi Bernhard, es ist immer wieder schön, dem Baufortschritt zu folgen. Viele Grüsse Stefan

Hanno Kleinecke
Boah ! Cockpit looks super, excellent work !

Erik Leijdens
Impressive work!

David Thor
Looks like you could actually fly the finished model from that cockpit.

Clifford Keesler
Excellent cockpit!!

Bernhard Schrock
Thx🙂
I got to the point where I don't care how long it takes to finish. Nose section is completed.

Łukasz Gliński
Interesting conclusion, but we're still watching 😄

Zbynek Honzik
Excellent job Bernhard! :-o

Wesley De Braekeleir
amazing work! unbelievebel detail! RESPECT!!! 😉

Bernhard Schrock
Today I finished the cockpit interior (minus main instrument panel and MG's and ammudrums: coming later). Now is time for painting🙂
By the way: thank you Mates for supporting me via positive comments.

Adam Gudynowski
I love your work!

Bernhard Schrock
By the way: any days ago I discovered a thread on pfmrc (polish RC forum) about a 3D model of the Łoś. Agnieszka alias Kropka is in my opinion a CAD genius. You MUST have a look at lthis!
pfmrc.eu/index.php?/topic/58589-pzl-37-w-3d/

sketchfab.com/models..467b8bd38f508a223662

Bernhard Schrock
During several decades it became a law that the interior of the Łoś should be painted grey. In the last years new insights have been found that the interior was painted polish khaki (exterior colour) except the rear part of the fuselage that was unpainted (natural colour of aluminum).
I followed several discussions on polish modeling forums with great interest and after own research I decided to join this opinion.
Now the interior is completed minus instrument panel and several parts in the glasnose🙂

Clifford Keesler
Maganicifent job.

Bernhard Schrock
In the typical manner of this time Łoś has OVERLAPPING skin panels on the fuselage. This means that the surface should be have no recessed panel lines. Because of the thickness of the used duralumin in sheet (2-3 mm) each material for the model such plastic is too thick. So I decided to try this effect with Surfaced 500 from Mr Color.
For the 2 first steps see pictures 103-105.

Adam Gudynowski
This is going to be the most accurate Łoś I've ever seen!

Bart Goesaert
nice work with the paint. in shipmodelling they tend to scrape away the material just under the line, and the file away the corresponding bulge till it is smooth: HMS NELSON | Album by elmarriachi (1:200)

Too bad you need to re-apply the rivetting, but it will give a nice result...

Bernhard Schrock
Hi Adam. Thx for your opinion. I'm very honored to hear such a opinion from a polish modeler. I suppose you have an account on the PWM and know the Łoś - thread by "Jambus" from 2012/2013? I discovered this build in the research phase of my Łoś and I was absolutely stunned about his work. Unfortunately 2013 there was a stop of the build. Such a pity!!
Best wishes Bernhard

Notabene: miałem wielkie szczęście że z moim Łosiem tak długo czekałem bo doczekałem się najlepszej dokumentacji która mogę sobie wyobrazic: model 3D, Agnieszki Cyrankiewicz, na PFMRC. Zajrzyj tam: bardzo się opłaca!!!

Erik Leijdens
Spectacular build Bernhard. You're a real master 👍

Spanjaard
the handles in the inside of the glass part, are they simply inserted there, or did you also add some glue? which glue did you use, if i may ask? thanks

Vitor Hugo Sousa
pure modelling

Bernhard Schrock
ThX Erik, Spanjaard and Victor Hugo.
@Spanjaard: first I deyermined the correct placement (temporary framing from Tamiya tape) and drilled from outside 0,24 mm holes. Then inserted the grips (0,2 mm black wire, flattened in the middle) from inside and secured on the inside with a very little drop of CA (applied with a 0,1mm wire). After polishing with polished paste and after painting nothing more will be visible.

Spanjaard
thanks a lot Bernhard

Bernhard Schrock
Instrument panel.
In the typical manner of the polish aircraft the Łoś has very colorful instruments: orange-brown, red and blue. I'm not yet quite satisfied with the result.
Windshield and pilots hatch.
Very interesting: both upper windows of the pilots hatch were tinted blue. Obviously a lot of modelers do not know this (me too). In this area I was confronted with a complicated task. Similar to the nose the struts of pilots hatch was wrong. Sanding of the very heavy molded struts resulted in making the final result too small (grrr). Astonishingly and fortunately the vacuum formed part of the S-Model turned out to be fitting well after a little reworking. Especially the eye-shaped windshield windows were correct in shape (in contrast to Mirages part) and distortion free.

MRMLA
Excellent work, still following. I'm happy to see how Masters of modellig works...

Bart Goesaert
excellent work. what type of glue do you use to glue things into the glass parts?

Bernhard Schrock
THX Bart. CA-glue (Tamiya). Very tiny drops at once. So I'm able to prevent fogging.

Hanno Kleinecke
Hurra, fits perfect ! Very curious on the new CA glueing- technique .

Urban Gardini
Fantastic work as usual mate! It's a joy to follow your attention to detail and reworks as you stumble upon new data along the way.

Bernhard Schrock
Yesterday I managed the probably most complicated task of the entire project: mounting of the vacuformed pilot canopy on the fuselage. Astonishingly this worked good and I suppose the new gluing technique helped to prevent fogging.
First I used CA to fix the part in the correct position (about 1/3 of the edges were fixed with CA). As second step I filled the remaining area with Future (sealing of the gaps to prevent of fogging). After drying of Future I used CA again to fill the remaining gaps. After two rounds of CA I was ready and veeeeery satisfied.

Bart Goesaert
that rear gunner window has a rather strange form, curious...

Bart Goesaert
are the numbers decals? or are have the been masked and sprayed?

Adam Gudynowski
Aren't You worried of fitting between painted wings and fuselage? The glass looks impressive!

Bernhard Schrock
Bart: On lower side I used decals of the S-Model kit (Techmod too but with durable carrier film printed on TOP of the decals). I removed the carrier film on the "squares" and as well as possible on the black numbers (some was left on the inside of "6" and "8"😢.
Adam: Thank you. By the way: I used a new technique for painting. First I airbrushed a mix of Mr. Color Surfacer, Mr. Color Copper metal and humbrol green (this mix was very close to polish khaki). And then only a very thin coat of the polish khaki was necessary. So I prevented the rims of the windows from fraying. You are right: the fitting between the wings and fuselage is practically non-existent. Meanwhile the right wing is "flusely" ("na brudno"😢 fitted. Pictures comming tommorow.

Adam Gudynowski
Now, when You said it, I can see grain of metallic in paint, but it's not very much. Intresting idea and good efect 🙂

Bernhard Schrock
Hello Mates,

The last days I researched about the history of the plane with the radio-cal-number 864N (72.41) and discovered in the net very different informations. Some sources says that the serial-number 72.91 is correct but this number was not existent and is a interpretations-mistake of the serial-number 72.41. The airplane was a PZL.37Abis and not a PZL.37B (the only difference between Abis and B was the engine). All B's has serial numbers greater than 72.100.

PZL.37Abis Łoś, 72.41
radio-call number (under the wings) 864N
12 Eskadra Bombowa „Wróbel"
X Dywizjon bombowy
Crew: Balinski, Jensen, Wasylewski, Zielinski
The airplane was damaged (engine-problems) and was destroyed by a bombing incident on 04.09.1939 in Kuciny.


Does have anyone other/furher information? Each help will be appreciated.

Łukasz Gliński
Wish I had and could help, but you already know much more than I do 🙂

Bernhard Schrock
For a few days I have been doing what I like most: airbrushing🙂. Yesterday I airbrushed light blue on the fuselage & middle section of the wings. After washing I was surprised about the result/effect of the bomb bay doors made of black foil.

Clifford Keesler
Looking awesome Bernhard

Bernhard Schrock
Thx Clifford.
After this weekend the Łoś-project is very close to the last finish. I managed to join the tail and fuselage without problems and without damage of already completed components. After restoring rivets and pane lines and panels (Surfacer 500) I airbrushed light blue: I'm very satisfied. Rear clear part and Khaki for the upper surface today evening.

Łukasz Gliński
Bernhard, your todays pics are just incredible

Hanno Kleinecke
I second that, outstanding accuracy, exemplary !

Bart Goesaert
looks very good. that preshade of the panels is interesting

Bernhard Schrock
Bart: these grey "elements" are overlapping panels not preshading. By the way: as usual I use postshading.

Clifford Keesler
Just stunning work Bernhard.

Bernhard Schrock
Clifford: I'm glad that you like it🙂
Today only a mini task: landing gear and doors in place. As you can see the doors don't have actuators. There was nothing in any picture. So I did not include it because I had no idea how it works...

Glenn
Awesome work as usual! 🙂

MRMLA
Stunnig. Unpatiently awaiting final result. This is not only great build Bernhard, this is also famous modellers course, high school at least...

Spanjaard
this is university.....😉

Gordon Sørensen
Looking great Bernard!

Bernhard Schrock
Thank you for support on the last 100 meters! Very appreciated:
yesterday evening I noticed that the inner flaps are too short for the cutouts!! Obviously I calculated the length WITHOUT the gaps between fuselage and wings🙁 Sh.....! Today morning I knew that after all already finished corrections, refinements, corrections, refinements and corrections of the kit I had to correct this mistake too...

Bernhard Schrock
One of the most time-consuming projects I ever managed is finally finished. As usual a glass of wine🙂🙂🙂 first and just a few quick shots. The "real" pictures tomorrow.

Maciej Bellos
Fantastic result! The research, the bits and pieces added, the paintjob. All is fantastic. Congrats mate.

Łukasz Bąk
It's great that Polish famous airplane finds it place in hands of international modellers. Awesome work!

Augie
wow, superb work!

Kees Kleijwegt
Wow! Breathtaking modeling as usual. Excellent job Bernard 👍👍

Hanno Kleinecke
Durchgebissen !!! Allererste Sahne, perfekte Arbeit !!!!!

Spanjaard
beyond words, beyond professional and beyond award winning. congratulations. and inspiration for us all.

Urban Gardini
Fantastic, it's been a joy to follow your work mate!

Michael Hickey
Beautiful workmanship Bernhard, well done on a top job.👍👍👍

Mike Grant
Fantastic work Bernhard. The clear parts look amazing 👍

Bernhard Pethe
Glückwunsch, Modellbau vom Feinsten. 👍

Ulf Petersen
Most spectacular, Bernhard!👍

Erik Leijdens
Absolutely amazing work. Best model on Scalemates 👍

Krzysztof Mag
Wow. Great job! I wanna prepare the same model, but it's difficult to make (Łoś of Mirage Hobby isn't easy to build)

Bart Goesaert
superb work, a real piece of art...

Soeren R.
Great work!

Holger Kranich
Thats some serious craftmanship! Geiles Teil Bernhard!👍

Jean Pierre CULIS-FERY
Vraiment un superbe travail, un montage passionnant à lire. Bravo!

Łukasz Gliński
Absolutely outstanding result Bernhard, congratulations

Stefan Schacht
Hallo Bernhard, Glückwunsch, es ist immer wieder eine Freude Dir bei Deinen Projekten zuzusehen. Viele Grüße Stefan

Bernhard Schrock
Tank you very much for this lot of comments!! As "promised" I shoot today morning any pictures with my Coolpix...

Bill Gilman
Exquisite! 👍 👍 👍

gorby
As good as they come – worthy of being in a museum.

Lex Jassies
Congratulations with this beautiful result!

Christian Ristits
Great work as always, top!

Brian McColl
Very well done

Alexander Perov
congratulations on the completion of another super work .your patience and diligence to be envied it is a pity that a large part inside the again, will remain invisible

Clifford Keesler
Excellent work.

Enrico Chiambalero
Awesome job!!!

e p
Kudos Bernhard! 👍

Kerber
Amazing! Bravo!

Stephan Ryll
Wonderful Bernhard 👍

Adam Gudynowski
I was following whole work with greatest pleasure. Very well done! Congratulations! Best Łoś in any scale I've ever seen!

Marc A.
Another outstanding work from you Bernhard!!!. Congrats!!!

Christian Bruer
Unique aeroplane and a sharp and clean work as usual Bernhard 👍

MRMLA
This is amazing Top-Master Class work Bernhard, no more words. Just my hat down many times. 👍 👍 👍 👍 👍 And another thumb up for detailed build description 👍 ! It's enough for a book!

Wojciech Kucza
Wonderful job! Great research and finish - it's a pleasure to look at it! (as with all your models!).

Arash Zakeri
Nice

Mateusz Wisniewski
Such quality work! A great deal of patience is required with this kit but the patience and execution elevated this model to the next level.

Rick402
WOW, this is Amazing! Do you have a YouTube channel? If not then make one this would be Awesome to watch! WOW, you are an absolute Artist!

Zbynek Honzik
Well done, Rick, for dusting off this fantastic build! What Bernhard has done here is, in my opinion, the absolute pinnacle of modelling. I've looked through the whole gallery again and I'm once again in mute amazement at the beauty. Bravo Bernhard! 👏👏👏👏👏👏👏

Neuling
A masterpiece.

Kurt Fankhauser
I am currently working on this model and was looking for someone who had built it before to see how to do the bombardier's seat and kneeling pad. Wow! This is amazing! Thanks for the detailed photos. But now I feel like boxing mine back up and picking a different hobby. 😉

Bernhard Schrock
I'm veeeery glad to see this model in the „charts" again! I'm very honored by you comments. Kurt: do you have started the WIP thread yet? This aircraft is one of those that interests me very much, especially since there are hardly any finished models. No wonder the kit is a tough chunk! Please note that I have changed by mistake the seat cushion and backrest on the front seat. When I realized it, it was already too late to correct it.

Rui S
Welcome to scalemates🙂

David Taylor
Stunning build Jorg.

Michael Kohl
Still absolutely amazing.
One point of criticism though: 23 pics are insufficient. 😉

Jörg Schäfer
Thank you both.
And I thought I exaggerated Michael. 😂

James C
Looks fantastic 👍

Jan Peters
Superb modelling work Jörg, and I agree with Michael, 23 pics is quite minimal 🙂

Johne 69
Well done Mate 👍 do you know how much time you spent to this Projekt?

Robert
nice weathering, well done...

Jörg Schäfer
Danke.
Ich habe zwei Jahre und vier Monate an dem Modell gearbeitet.

John
Outstanding craftsmanship!

Christian Lehmann
Outstanding! So many details dispersed over the whole model. Always new things to be dicovered.

Dietmar Bogatzki
Dafür hast du ein Supermodell gebaut, Jörg.
Und die Bismark Sammelserie kommt auch auf 2 Jahre nur das Ergebnis da 🙁

Spanjaard
Wow, this is a work of art! What a fantastic model

Jörg Schäfer
Many thanks, Gentleman.

Neuling
A masterpiece.

Jörg Schäfer
Thanks Neuling

Juskifo
👏👏

gorby
Congratulations on your award - very well deserved.

Jörg Schäfer
Many thanks Gorby.

Alessandro B
Outstanding model, congratulations 👏🏻

Jörg Schäfer
Thank you Alessandro. 😊

CaptGPF
Another masterpiece - your eye for details and execution really makes this an engrossing kit. Mike is right, 24 pics are too few, I can imagine spending hours just looking at all of the stuff you have done on this build. Bravo!

Jörg Schäfer
Your comment makes me proud. I'm happy if my model captivates you.
Damn, I would have taken more pictures. 😉

Christian Abraham
Wow, Wahnsinn. Sehr schön

Jörg Schäfer
Vielen Dank, Christian. 😊

Rui S
Excelent work 👍

John E
Beautiful build of a handsome ship.

Jörg Schäfer
Thank you for your appreciation.

Chrisswe
Amazing detail!

Jörg Schäfer
Thank you, Chrisswe.
Of course, a lot is possible at a scale of 1:200. 😉

DuperScale
Wow, that's very impressiv. Cant get any better.

Pepe
❤️❤️❤️❤️

Chrisswe
I very much admire your work Jörg. You show what an expert can do with the 1:200 scale. Adding crew also makes a big difference for large scale ships. You make me consider building a 1:200 ship but first I must improve my skills and train my patience for a year or longer project 🙂

Jörg Schäfer
Thanks for the comments everyone. I'm glad you like the pot.
Chrisswe. That's right, the crew breathes life and depth into the model and also illustrates what a large ship this is.
I would be very happy if I could inspire you with my favorite scale. And when I see your outstanding Tirpitz, I don't think it will take you that long to start such a mega project.
Have you also read my construction report on the Bismarck?

Baubericht | Album by madtatt (1:200)

There may be one or two tips there.

Chrisswe
My German is a little rusty but I think I can follow you report. I'm eyeing the USS Enterprise (CV-6) for a 1:200 build. It will probably not be too hard to start such a project but hard to finish it😅.

Jörg Schäfer
Oh dear, that's right.
I just noticed that I wrote this report in German. It was my first here. That can be changed. 😉

Guy Rump
Superb modelling, the detail is absolutely stunning! Congratulations! 👍

Jörg Schäfer
Many thanks, Guy.

Spanjaard
I do not see any commments on Baubericht | Album by madtatt (1:200) , it may be related to the fact that comments seem to be "private"

Alex K
👍

Ben M
Beautiful! The subject is great.

Kim Branders
Good work. Grtz Kim.

Es-haq Khosravi
Great job!

Rui S
Thank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...

Rui S
Kim, Coming from an real Expert in the subject like you, is a great complement, Thanks.

Kim Branders
I'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.

Kim Branders
I meant hobby😉

Rui S
HeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.

Marko Paakkanen
Very nice tree !😉

Nice dio coming!

Rui S
Thanks Marko. Yes a small one that also died early...

Donald Medley
Love your base

Rui S
Thank you Donald, the finished one is in the photo19

Tim Heimer
I love the detail work, just awesome!

Rui S
Thank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉

Donald Medley
You'll love working with oils, trust me

Fabian D.
Your solution for the Zimmerit is genious. Nice finish aswell.

Donald Medley
Very nice indeed

Rui S
Thank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...

Tim Heimer
Hey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking

Rui S
Agree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...

Rui S
Some ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...

Wesley De Braekeleir
Ubercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉

Rui S
Thank you very much for your nice comments, mates.
Much appreciated :
)

CaptGPF
Damn Rui, that camo pattern is wicked! The mud effects are also impressive!

Mr James
I agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?

Rui S
@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated

Mr James
Ah, its a Bonsai tree. No wonder it looks so good. 🙂

Rui S
I'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...

Alec K
Nice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍

Doubtingmango
Great job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!

gorby
Good to you back modelling Rui.
The horse looks great.

Rui S
@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉

CaptGPF
wow! you aren't horsing around (pun intended)! They look amazing!

Rui S
Thank you for your comment CaptGPF, Glad you like my hors ing 😄. Apreciated

Landlubber Mike
Nicely done!

Desert Marlin
Looks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!

Ben M
I hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.

Kim Branders
Rui, the horse looks amazing.

Rui S
@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.

bughunter
I'm not really into tanks but that is a great looking horse 👍

Rui S
Wow, this is an unexpected comment. It's always great to receive a compliment from a Master. Thank you so much for stopping by and for those encouraging words. Appreciate it.

Ben M
Did you give the horse a dark wash around the tendons or post shade?

Rui S
Hi Ben, If i reacall corrctely, I gave a little bit of both, sarting with a black primer, overal coats with oils leaving those spots almost unpainted or with less coverage.

Angel Yovtshev
These horses were a nice surprise, Rui!

I'm currently fighting the harnesses of a two-horse team pulling a gun carriage(it's a hard fight- I can tell you!).
Your reins look splendid!

Cheers,
Angel

Pietro De Angelis
Damn, what a gestation this work has had,
it gives me hope that sooner or later I too will finish something!😅
Congratulations for the scene and for what you managed to do with that old Elefant, the horse is wonderful!
Admiration and respect

Desert Marlin
Very well done! Keep it up!!!

Rui S
@ Angel Yovtshev, Thank you for stoping by. Mate Your comment was also a nice surprise to me. Apreciated. I'm sure that for a master scratch builder like you, the harnesses will be a piece of cake. Looking forward to see it.
@ Pietro De Angelis, Thx a lot for you praise, really Apreciated. But you are right and If you would know the century I started the Italeri kit... 😄 I'm a slow modeller wich fails to keep the Mojo high for long periods, so, it's nice to make a few more steps to conclusion. I'm glad you like my work on the Elefant and horse.
@Desert Marlin, Thx again for your suport, it means a lot to me. I'm sure you noticed that i've followed your advise and gave it a soft overcoat of satin Varnish on the upper or most exposed surfaces 😉

Desert Marlin
I did indeed notice! Bravo!

Gary Victory
Really nice progress Rui. Impressive work on the soldiers camo.

Alec K
Nice progress on the embarrassed rider 👍

Doubtingmango
Headless horseman arrives just in time for Halloween!

Desert Marlin
Looking absolutely great!

Mark Sherwood
Nice work on the Hoss' the shading's brought out the musculature. The camo' on the headless horseman is top notch too. 🤟🥸🤘

Rui S
Hi, mates, sorry for my late reply, but I prefer to do it with some new uploaded progress photos. Gettting near to the end on this two. Hope you like them.
@ Gary Victory, Thank you very much for stoping by and nice comment;
@ Alec K, Thx again for your words, the rider come back with proud;
@ Doubtingmango, Thx for looking. Now I think he is redy for another kind of Halloween, if you get my drift;
@ Desert Marlin, thank you for your kind words, suport and Encouragement. Apreciated;
@ Mark Sherwood, Thank you for your nice comment. I know nothing about horse anatomy, so I follow the reliefs and I Think I can be happy with the result.

Desert Marlin
Just looks awesome! The progress is excellent!

Guy Rump
Superb so far!! 👍

Rui S
@ Desert Marlin, Thank you a lot for your Great suport.
Near the end as intended in photo 19 (June 20, 2016, 😮).
A few more bits and pieces and I can finaly close this chapter. That makes me very happy.

Rui S
@ Guy, sorry, didn't notice your comment during the uploading of the photos. Thank you. I'm glad you comment and like it.
@CaptGPF, I take this opportunity to post the images that inspire the camouflage painting. The numbering remained on the decals that I had.

Robert Podkoński
Taking a seat, of course!

bughunter
Welcome Robert! Which one you want to take, the yellow or a green one? 😉

Please do not miss the project description, for the _VERY_ important reason for this project!

Robert Podkoński
👍 A green one, please 🙂

Marcel Klemmer
Hi Frank, I am in and do not need a seat. 😉

Ludvík Kružík
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉

Spanjaard
I am certainly in

Martin Oostrom
Green two for me

David H
Be rude not to join in. 👍🏻

gorby
I'll join the audience as well. 🙂

bughunter
Hello my friends! A warm welcome to each and every one of you!

Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!

Michael Kohl
Moin Frank. Nimmst mich mit?

bughunter
Aber sicher doch, wenn Du eine wilde Fahrt aushälst 😉

Kenneth
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.

Juergen Klinglhuber
Schau ich mir auch an,...

bughunter
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.

bughunter
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.

Robert Podkoński
Perhaps you will find my photos useful for your build:
Hangar 10 | Album by podkon

bughunter
Yes, definitely 👍 Thanks!

bughunter
Found a nice page: stearman-aero.com/

bughunter
The wing is yellow again, but now the look is better!
I used here MRP-142 Orange Yellow. If someone remembers my Piper: the yellow was "Dark Chrome Yellow" also from MRP. Even this one here called "Orange Yellow" it looks more yellow compared to the Piper.

Ben M
👀

Mike Goodman
Now there is an interesting project. I'll watch for this neat little vehicle to take shape!

Sergey E.
Mike, у меня есть собранный СТЗ-5 ( в альбомах) и есть БМ-13 от "Звезды" (тоже в Альбомах). СТЗ крайне приятен в сборке, модель очень хорошая, рекомендую всем.

Mike Goodman
Sergey, how popular is the scale model hobby in Russia?

Sergey E.
Очень популярно! Постоянно вижу новости, что открываются детские клубы. В московских школах практически в каждом классе есть школьник, который увлекается стендовым моделизмом. В разных регионах постоянно проводятся выставки и конкурсы. С каждым годом всё больше и больше новых производителей дополнений для моделизма.

Olivier
That is good news !

Mike Goodman
Sergey, in Canada, there may not be as much interest in this bench hobby, however I sometimes encounter some young people in hobby stores who like to build scale models. I'm always encouraged with that! I was once a school teacher, and I led a model club. I wonder if these young people have continued in the hobby.

Sergey E.
У меня есть друг в США, который мне написал год назад, что моделизм стал дорогим хобби для детей и родителей. Возможно, отчасти дело в этом