Стрічка новин
Mr D
додав новий фотоальбом.
додав новий фотоальбом.
66 зображення
Romanian lAR-80 Fighter Новий: 8 October, 13:32 1:48
Just the underside decals to do next, then a clear coat... really for a oil wash.
The colour sheet shows yellow upper ...
Проект: Hobbyboss IAR-80
26 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
18 September, 19:29
Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
18 September, 19:59
Mr D
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
6 October, 19:34
Neil
додав новий фотоальбом.
додав новий фотоальбом.
15 зображення
Monogram | No. 5445 | 1:48 | Northrop F-20 Tigershark (WIP)Новий: 8 October, 13:32 1:48
Unboxing and checking out kit instructions...
Проект: Northrop F-20 Tigershark
9 10 July, 13:14
Neil
додав новий фотоальбом.
додав новий фотоальбом.
20 зображення
ESCI/Humbrol | No. 4060 | 1:48 | Aermacchi MB-326K Impala (WIP)1:48
WORK IN PROGRESS. UPDATED: 8/7/24...
Проект: Aermacchi MB-326K IMPALA
19 4 December 2023, 11:03
Neil
додав новий фотоальбом.
додав новий фотоальбом.
9 зображення
Special Hobby | No. SH48017 | 1:48 | Gloster E.28/39 Pioneer (Squirt) "First British Jet"Новий: 8 October, 13:29 1:48
Проект: Gloster E.28/39
3 27 August, 11:16
Josafat
хоче цей предмет
хоче цей предмет
Porsche 911 RSR 2018 LM GTE Class Winner 991 RSR "Pink Pig"
NuNu Model Kit 1:24
PN24040 2024 Нова прес-форма 8 October, 13:31
Neil
додав новий фотоальбом.
додав новий фотоальбом.
4 зображення
Revell Monogram | No. 85-7546 | 1:48 | Northrop P-61 Black WidowНовий: 8 October, 13:31 1:48
Проект: Northrop P-61 Black Widow
1 7 February, 10:07
Rod -
додав новий фотоальбом.
додав новий фотоальбом.
20 28 August, 15:05
Rod -
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
28 August, 15:12
Rod -
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
28 August, 15:13
Rod -
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
28 August, 23:01
Rod -
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
22 September, 12:05
Rod -
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
22 September, 14:38
Rod -
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
3 October, 08:04
Rod -
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
3 October, 08:07
Rod -
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
3 October, 08:12
Thomas Wirsching
Great color choice! I am not into car modelling but yours look great!
Great color choice! I am not into car modelling but yours look great!
3 October, 09:40
Rod -
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
3 October, 11:13
Milos Kajtez
хоче цей предмет
хоче цей предмет
Shinmeiwa PS-1 `The First Production´ w/ Tractor Limited Edition
Hasegawa 1:72
02427 2023 Нові деталі 8 October, 13:30
Milos Kajtez
позначив цей предмет як замовлений
позначив цей предмет як замовлений
Mitsubishi A6M2b/A6M3 Zero Fighter Type 21/22 'Rabaul Ace Set'
Hasegawa 1:72
02437 2023 Набір моделей 8 October, 13:29
Milos Kajtez
хоче цей предмет
хоче цей предмет
Mitsubishi G4M1 Type 1 Attack Bomber Models 11 `Rabaul Front Line Inspection´ w/Figure Limited Edition | 1/72 scale Isoroku Yamamoto figure parts included
Hasegawa 1:72
02435 2023 Нові деталі Багато тем (2)8 October, 13:29
Milos Kajtez
позначив цей предмет як замовлений
позначив цей предмет як замовлений
B-239 Buffalo & Messerschmitt Bf109G-6 `Juutilainen´ w/Figure
Hasegawa 1:72
02439 2023 Нові деталі Багато тем (3)8 October, 13:29
Lorraine Lin
додав новий фотоальбом.
додав новий фотоальбом.
4 7 October, 13:25
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo