Стрічка новин
Dave Norman
додав новий фотоальбом.
додав новий фотоальбом.
1 21 July, 20:05
Dave Norman
Photos of the completed model before I start work on the base. Eduard's 1/48th "Desert babe" plus additional accesories from Eduard including, AIM-7s, Boz pod, Skyshadow pod, paveways. Also added Master's pitot probe and some 3d printed intake and exhaust blanks purchased from a nice chap on Ebay. Paints used were mostly MRP-243 US Desert Sand (FS30279) with some MRP-185 Desert Pink RAF used to post shade and add some variation.
Photos of the completed model before I start work on the base. Eduard's 1/48th "Desert babe" plus additional accesories from Eduard including, AIM-7s, Boz pod, Skyshadow pod, paveways. Also added Master's pitot probe and some 3d printed intake and exhaust blanks purchased from a nice chap on Ebay. Paints used were mostly MRP-243 US Desert Sand (FS30279) with some MRP-185 Desert Pink RAF used to post shade and add some variation.
21 July, 20:13
Alec K
володіє цим предметом
володіє цим предметом
Czechoslovak pre-WWII pilots (3 fig)
CMK (Czech Master Kits) 1:72
F72325 21 July, 20:12
Alec K
володіє цим предметом
володіє цим предметом
Marder Tank Destroyer Commander and Gunner
CMK (Czech Master Kits) 1:72
F72400 21 July, 20:11
Alec K
володіє цим предметом
володіє цим предметом
Avia S-199 Pilot and Mechanic / for Eduard and other kits
CMK (Czech Master Kits) 1:72
F72385 21 July, 20:11
David Smith
додав новий фотоальбом.
додав новий фотоальбом.
46 30 June, 11:44
David Smith
I hadn't seen Konrad's build! I'm not promising the same attention to detail.
I hadn't seen Konrad's build! I'm not promising the same attention to detail.
30 June, 20:38
David Smith
Thanks everyone for your generous comments. The kit is a bit fiddly in places - lots of thin struts and no location points - so I wouldn't recommend it for beginners. However, I must say that the finished result is all I could have hoped for. The 'look' of the finished article is just what I wanted and I thoroughly enjoyed building it. The canopy masking set and resin missile system were superb. The decals too, although I only needed a tiny proportion of what was on the sheet.
Thanks everyone for your generous comments. The kit is a bit fiddly in places - lots of thin struts and no location points - so I wouldn't recommend it for beginners. However, I must say that the finished result is all I could have hoped for. The 'look' of the finished article is just what I wanted and I thoroughly enjoyed building it. The canopy masking set and resin missile system were superb. The decals too, although I only needed a tiny proportion of what was on the sheet.
21 July, 20:10
Alec K
володіє цим предметом
володіє цим предметом
RAF Pilot Sitting in Cockpit w/Monkey on Shoulder + 2 Mechanics, Western Desert
CMK (Czech Master Kits) 1:72
F72344 2018 Нова прес-форма 21 July, 20:10
Alec K
володіє цим предметом
володіє цим предметом
German WWII personnel for Meillerwagen V2 transporter Special Armour
CMK (Czech Master Kits) 1:72
F72304 2016 Нова прес-форма 21 July, 20:10
Alec K
володіє цим предметом
володіє цим предметом
Afrikakorps Soldier Riding Camel 3D Printed
CMK (Czech Master Kits) 1:72
F72388 (129-F72388) 2023 Нова прес-форма 21 July, 20:09
nikfrost
додав новий фотоальбом.
додав новий фотоальбом.
13 27 April, 16:38
nikfrost
Thanks Bozzer! I think I'm getting the hang of this gloss finish also...hopefully.
Thanks Bozzer! I think I'm getting the hang of this gloss finish also...hopefully.
8 July, 20:23
Mr D
Nice 👍 very nice, the cast texture on the engine looks good, it's the prv V6 is it ?
I had an RC version as a kid .
Will look fantastic when the decals go on.
👌
Nice 👍 very nice, the cast texture on the engine looks good, it's the prv V6 is it ?
I had an RC version as a kid .
Will look fantastic when the decals go on.
👌
12 July, 20:58
nikfrost
The cast texture is Tamiya flat aluminium XF-16 very poorly sprayed by me haha, I think it was drying on its way from the airbrush to the surface and kind of built up.
The cast texture is Tamiya flat aluminium XF-16 very poorly sprayed by me haha, I think it was drying on its way from the airbrush to the surface and kind of built up.
12 July, 21:26
Mr D
Worked well to the effect 👍 Tamiya dries really fast , l use Velejo mostly, l found Tamiya to fast n thickens up in the pot, Velejo doesn't harden like Tamiya n definitely needs good clear coat.
Nice project 👍
Worked well to the effect 👍 Tamiya dries really fast , l use Velejo mostly, l found Tamiya to fast n thickens up in the pot, Velejo doesn't harden like Tamiya n definitely needs good clear coat.
Nice project 👍
14 July, 16:14
nikfrost
I always put a dollop of tamiya lacquer thinner in and two mixing balls, seems to keep it moving quite well.
I always put a dollop of tamiya lacquer thinner in and two mixing balls, seems to keep it moving quite well.
14 July, 21:12
Rob K.
додав новий фотоальбом.
додав новий фотоальбом.
2 21 July, 19:26
Rob K.
The scale is 1/48. I am new to scalemates. Just joined. Trying to find this post. Under which header/subject are you able to see this album? I am unable to find this post where everyone can see it. Thanks
The scale is 1/48. I am new to scalemates. Just joined. Trying to find this post. Under which header/subject are you able to see this album? I am unable to find this post where everyone can see it. Thanks
21 July, 20:08
Danny Hoogstraaten
хоче цей предмет
хоче цей предмет
Lioré-et-Olivier LeO.451
POMK (Pend Oreille Model Kits) 1:48
4830 21 July, 20:06
Roland Sachsenhofer
додав новий фотоальбом.
додав новий фотоальбом.
24 7 July, 09:05
Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
7 July, 09:08
Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
7 July, 18:13
Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
7 July, 18:25
Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
8 July, 06:46
Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
8 July, 14:30
Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
9 July, 12:40
Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
11 July, 15:21
Michael Kohl
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
11 July, 17:27
Roland Sachsenhofer
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
12 July, 06:56
Roland Sachsenhofer
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
17 July, 17:34
Roland Sachsenhofer
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
18 July, 11:51
Robert Podkoński
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
18 July, 14:43
Roland Sachsenhofer
Robert, thank you for that important hint, I wasn't aware of this!
Robert, thank you for that important hint, I wasn't aware of this!
18 July, 14:47
Roland Sachsenhofer
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
18 July, 18:18
Robert Podkoński
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
18 July, 19:47
Roland Sachsenhofer
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
21 July, 18:12
Ben M
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
21 July, 20:04
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo