Стрічка новин
Stuart Fowleдодав новий фотоальбом.
10 1 June, 16:07
Jonathan Read-BoneWow! What would you do if you saw this rolling down your street 😳 ... nice diorama 👍
11 July, 11:55
Miloslav Sladekволодіє цим предметом
LTV A-7 Corsair II Flying with Air Forces around the World
Aircraft in Detail № 038
Robert Pied, Nicolas Deboeck
2023 11 July, 15:32
Raphael Bernecoleдодав новий фотоальбом.
53 19 December 2023, 08:05
MariusGreat progress, it will be a great model at the end. Is that the Aires resin cockpit set for the F-4F which you adapted?
18 April, 20:33
Raphael BernecoleThank you very much to everyone for your support and follow-up 🙂
@Marius : I had the SBS Models resin kit in stock for the Revell kit. This kit is well detailed but complicated to place in the Phantom. I recommend the Aires Kit, much superior in every way 😉
F-4 E/F Phantom - Cockpit Set (SBS Model 72004, 1:72)
19 April, 07:06
Miloslav Sladekволодіє цим предметом
Boeing AH-64 Apache Flying with Armed Forces around the World
Aircraft in Detail № 34
Robert Pied, Nicolas Deboeck
2024 11 July, 15:30
Jonathan Read-Boneдодав новий фотоальбом.
22 зображення
Douglas Dakota & Flying Nightingales
1:72
Проект: Douglas Dakota Mark III
1+ 3 10 July, 20:26
ICM 1:24
Roland Sachsenhoferдодав новий фотоальбом.
14 7 July, 09:05
Roland SachsenhoferThis project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
7 July, 09:08
TreehuggerI just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
7 July, 18:13
Roland SachsenhoferIf this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
7 July, 18:25
Roland SachsenhoferThank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
8 July, 06:46
Raz1I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
8 July, 14:30
Roland SachsenhoferI agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
9 July, 12:40
Roland SachsenhoferA few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
11 July, 15:21
Roland Sachsenhoferдодав новий фотоальбом.
15 7 July, 08:59
Roland SachsenhoferWith these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunterWatching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland SachsenhoferThanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Roland SachsenhoferThe fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
11 July, 07:09
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo