Стрічка новин

Doubtingmango
Watching

George Williams
Looks like a nice kit.

Alec K
Taking a seat for this resin extravaganza. And I agree, very nice kit 👍

Robert Podkoński
Watching, of course!

Treehugger
Question for OP:
What brand might be selling vacuum formed clear parts? Seems like you found some as seen in photo #11. I've seen some for airplane/jet canopies, but none for cars, so I wouldn't know where to look.

Alexander Grivonev
Hey Treehugger, the parts in the picture are part of the kit. But funny that you mention this topic because I actually dealt with this question myself recently. I finished two 964s earlier this year (Revell and Fujimi) and the clear parts in both kits were of very poor quality. Searched for aftermarket replacement and found nothing. So I decided to try myself at vacuforming and made the clear parts myself which turned out to be pretty decent (after countless tries and errors) I have not posted pictures of the builds yet but intend to, keep an eye open. You are right, there is definitely a lack of aftermarket windshields for cars...

Michael Kohl
Following

Alexander Grivonev
Ahem, let`s continue here shall we? Not that I was absent for three months or something...

Alec K
Nice! Glad you're back 👍

Alexander Grivonev
Well I wasn't "gone", just unproductive😄

Spanjaard
looking great as usual, love your detailed explanations

Marcel
Looks very good so far, looking forward to the end result. Very interesting to read your notes.

Alexander Grivonev
Thx mates, I hope my explanation is comprehensive, if not do ask!

bughunter
Again, some fantastic clean work 👍

Martin Oostrom
I love this one too

bughunter
Alexander, I'm really sorry about this mishap!
They show us the difference between a normal modeller and a master modeller: mishaps happen to both, but with you there's nothing to see afterwards!

Alexander Grivonev
If you only knew how many car models I had to repaint! I honestly think most of them, partly or in whole. It is a rarity a paintjob succeeds at the first try. I don`t even call them "mishaps". Just "happy little accidents" like Bob Ross 😄

bughunter
Oh yes, the famous late night painting sessions on TV with the "happy little trees" 🙂 I was always fascinated by his work!

Alexander Grivonev
Exactly, the lullaby channel😄 no, the guy was really great.

But on the topic of repaintings again, I actually counted the car models which are right now in my home. There are a total 16 on display and I had to redo the paintjob on 9 of them! Partly or in whole. So that is actually not the exception but the rule 👍

bughunter
Anyway, your car paint jobs here on SM are the reference for me, no kidding!
Thank you also very much for the detailed description about used paints, 2K stuff and thinners etc in your build logs 👍
Fortunately, I don't normally need such high-gloss finishes, but I have helped other modellers (no SM members - yet) several times by pointing them to your build reports.
Thank you very much, your documentation effort is highly appreciated!

Mr D
Very smart 👌 and neatly done 👍
Like your parts organiser, definitely on shopping list.

Alexander Grivonev
bughunter now you are flattering me😄

Mr D👍

Martin Oostrom
Bugsy is usually right

Lorraine Lin
Alexander, fantastic work！Really like the painting jobs, the "leather" seats and car body. And the whole process is well documented, I leant a lot. Will add this page to my favorite, as I need to go through all these pictures before I build my next car. Thank you for sharing.

Mr D
The wheel are so realistic 👍👍
Did they use the Rudge wheel...like in the gull-wing??

Landlubber Mike
Wow, this is incredible! Thank you for sharing your techniques, I learned a lot!

Alexander Grivonev
Lorraine, you are welcome!

Mr D, I must admit I had to google what "Rudge wheels" are. but it seems to be an own VW/Porsche design that differs from Rudge wheels. USCP sells them separately too.

Landlubber Mike, my pleasure!

Alexander Grivonev
Back from a short vacation, the paint has cured. Let's wrap this one up..

Desert Marlin
Yep, always been curious about this mod. I will watch how this goes! Cheers.

ALBERTO ITURBURU HERREROS
Thanks Desert!

Олег О
I've always known that Black Dog sets are very difficult to put in place. Good luck and patience.

ALBERTO ITURBURU HERREROS
Black dog set it is a really headache!…but the AliExpress version it is a joke!😂😂

Nicolas
Following

Robert Podkoński
Me 2!

Marcin Dudek
👀 3rd

Dave Burgess
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)

Guy Rump
Following as well! 👍

Dave Burgess
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage

Dave Burgess
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.

Dave Burgess
Step 3: glue all the bits together; re-invorced with styrene strip

Dave Burgess
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.

Dave Burgess
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.

Robert Podkoński
Photos #4-6 terrified me... 😉 Great job, Dave!