Стрічка новин

Guy Rump
I forgot to put this in the ideas so it is starting "in progress".

Made a start with the cockpit and some weight in the nose, hopefully it's enough. 🙂

Nicolas
Following

Villiers de Vos
This will not be a tail sitter! Also booking my seat.

Guy Rump
Fuselage together, undercarriage fitted and aircrew added. 🙂

Welcome Nicolas & Villiers, thanks for your interest. 👍

Many thanks mates for your interest and likes NordMito, Matti T, Villiers DV & J35J. 👍

Robert Podkoński
Taking a seat.

Bernd Grün
Promising start, Guy. 👌 Looking for the final result.

Guy Rump
Wings and tail plane added. 🙂

Thanks for stopping by Robert & Bernd, as always, you're both very welcome. 👍

Many thanks mates for your interest and likes Robert P, scaleffect & Bernd G. 👍

Guy Rump
The Gnat had the canopy added, masked and then primer applied (light grey). I have painted the yellow with 3 coats of Vallejo Model Air Medium yellow and 2 coats of Hataka BS Golden Yellow. Next will be the tail. 🙂

Many thanks mate for your interest and like Sukhoi242. 👍

Guy Rump
Tail now painted black with yellow. 🙂

S M
Nice Yellowjack!👍

Mr D
Good to see the yellow on it, dose look good in the yellow.
Takes your time on the landing gear, can be little fiddly.
Good stuff 👌, thanks for uploading

Guy Rump
Sprayed with gloss varnish and then added the decals. Next will be adding the wheels and other ancillaries. 🙂

Many thanks for your kind comments SM and Mr D, they are greatly appreciated. @ Mr D, The front landing gear was very difficult to get off the sprue so I know what you mean. 👍

Many thanks mates for your interest and likes SM & Mr D. 👍

Guy Rump
Now completed, this is a Folland Gnat from the Yellowjacks display team based at RAF Valley, Anglesey in 1964, a forerunner team of the Red Arrows. 🙂 The last photo is a picture of the actual aircraft.

Many thanks mates for your interest and likes Duster_d, JK, Franck D, Joseph L & Alex R. 👍

Mr D
Hi Guy.
Nice to see it finished 👍
Looking nice, be good addition to the collection, like the yellow rudder.
How did the yellow paint go ? Can be an awkward colour.
Nice job👌 good stuff 👍👍

Robert Podkoński
Lovely!

Nicolas
Nice result guy. 👍

Ekki
Well done!

Guy Rump
@Mr D, I used a very light grey primer followed by Vallejo Model Air Medium Yellow and then Hataka Trainer Yellow x 2 coats over that. They went on better than I expected. 🙂

Mr D, Robert, Nicolas & Ekki, many thanks for the very kind comments, I appreciate them greatly. 👍

Many thanks mates for your interest and likes Christian S, Mark B, Mr D, Cuajete, Alain C, RolfRolf & 1 other mate. 👍

Guy Rump
Many thanks mates for your interest and likes Nicolas & Mirko R. 👍

Guy Rump
Many thanks mate for your interest and like Tcamp. 👍

Guy Rump
Many thanks mates for your interest and likes Noel B & Randy K. 👍

Guy Rump
Many thanks mates for your interest and likes Anatoli S, Sergio O, Bozo & Mark S. 👍

Guy Rump
Many thanks mates for your interest and likes Cristian A, Rona & Arif S. 👍

Stephen Lesley
Cute little plane. Scheme turned out well. Especially with yellow which can be so tricky.

Guy Rump
Thanks Stephen, I appreciate your comment greatly. 👍

Neuling
Beautiful colors!

Guy Rump
Lovely job! 👍

Neuling
Top build in cool presentation!

Guy Rump
Lovely build! 👍

Mr D
Thanks Alberto 👍
How's the Be-12 going?

Robert Podkoński
Watching with interest 🙂

Mr D
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.

Mr D
Thanks Villiers 👋😃👍
.fun little builds good for filling gaps on the shelf .

Guy Rump
Looking good, following. 👍

Skyhiker
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.

Mr D
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣

Mr D
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.

Ben M
Is that a Su-9 in photo 10?

Mr D
Hi Ben 👋
It's
Starfighter,
F-14 tomcat,
Mig-21
Mig-23 ground attack version.
👍

Ben M
😍

Guy Rump
Lovely collection. 👍

Mr D
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .

Mr D
^^ full size 🤣🤣 1:48 ^^

Ben M
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.

gorby
Nice result on all of them.

Mr D
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍

Robert Podkoński
Beautiful model! Congrats!

Neuling
Clean, careful, beautiful. Top finish!

gorby
Amazing result!

Guy Rump
Great job! 👍

Sergej I
Following 👍

Nikola
Looking forward to this one. The same is expecting me as well.

Ben S
Thanks for following folks. This was a difficult build, not least because the quality of the Revell kit wasn't great so there are a few areas I don't love. Nevertheless, from 3 feet away I'm happy with the look of it and got to grips with a few new techniques. Decals (both Quinta and Ze-Ro) are lovely, detail set is great but super fiddly at this scale, kit has tons of flash (especially the rear fillet between the tail and antenna mast).

Neuling
Very well done, Ben!

Sergej I
Great result Ben 👍!

Guy Rump
Great job! 👍

Kim Branders
Good work. Grtz Kim.

Es-haq Khosravi
Great job!

Rui S
Thank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...

Rui S
Kim, Coming from an real Expert in the subject like you, is a great complement, Thanks.

Kim Branders
I'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.

Kim Branders
I meant hobby😉

Rui S
HeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.

Marko Paakkanen
Very nice tree !😉

Nice dio coming!

Rui S
Thanks Marko. Yes a small one that also died early...

Donald Medley
Love your base

Rui S
Thank you Donald, the finished one is in the photo19

Tim Heimer
I love the detail work, just awesome!

Rui S
Thank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉

Donald Medley
You'll love working with oils, trust me

Fabian D.
Your solution for the Zimmerit is genious. Nice finish aswell.

Donald Medley
Very nice indeed

Rui S
Thank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...

Tim Heimer
Hey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking

Rui S
Agree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...

Rui S
Some ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...

Wesley De Braekeleir
Ubercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉

Rui S
Thank you very much for your nice comments, mates.
Much appreciated :
)

CaptGPF
Damn Rui, that camo pattern is wicked! The mud effects are also impressive!

Mr James
I agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?

Rui S
@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated

Mr James
Ah, its a Bonsai tree. No wonder it looks so good. 🙂

Rui S
I'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...

Alec K
Nice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍

Doubtingmango
Great job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!

gorby
Good to you back modelling Rui.
The horse looks great.

Rui S
@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉

CaptGPF
wow! you aren't horsing around (pun intended)! They look amazing!

Rui S
Thank you for your comment CaptGPF, Glad you like my hors ing 😄. Apreciated

Landlubber Mike
Nicely done!

Desert Marlin
Looks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!

Ben M
I hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.

Kim Branders
Rui, the horse looks amazing.

Rui S
@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.

bughunter
I'm not really into tanks but that is a great looking horse 👍

Rui S
Wow, this is an unexpected comment. It's always great to receive a compliment from a Master. Thank you so much for stopping by and for those encouraging words. Appreciate it.

Ben M
Did you give the horse a dark wash around the tendons or post shade?

Rui S
Hi Ben, If i reacall corrctely, I gave a little bit of both, sarting with a black primer, overal coats with oils leaving those spots almost unpainted or with less coverage.

Angel Yovtshev
These horses were a nice surprise, Rui!

I'm currently fighting the harnesses of a two-horse team pulling a gun carriage(it's a hard fight- I can tell you!).
Your reins look splendid!

Cheers,
Angel

Pietro De Angelis
Damn, what a gestation this work has had,
it gives me hope that sooner or later I too will finish something!😅
Congratulations for the scene and for what you managed to do with that old Elefant, the horse is wonderful!
Admiration and respect

Desert Marlin
Very well done! Keep it up!!!

Rui S
@ Angel Yovtshev, Thank you for stoping by. Mate Your comment was also a nice surprise to me. Apreciated. I'm sure that for a master scratch builder like you, the harnesses will be a piece of cake. Looking forward to see it.
@ Pietro De Angelis, Thx a lot for you praise, really Apreciated. But you are right and If you would know the century I started the Italeri kit... 😄 I'm a slow modeller wich fails to keep the Mojo high for long periods, so, it's nice to make a few more steps to conclusion. I'm glad you like my work on the Elefant and horse.
@Desert Marlin, Thx again for your suport, it means a lot to me. I'm sure you noticed that i've followed your advise and gave it a soft overcoat of satin Varnish on the upper or most exposed surfaces 😉

Desert Marlin
I did indeed notice! Bravo!

Gary Victory
Really nice progress Rui. Impressive work on the soldiers camo.

Alec K
Nice progress on the embarrassed rider 👍

Doubtingmango
Headless horseman arrives just in time for Halloween!

Desert Marlin
Looking absolutely great!

Mark Sherwood
Nice work on the Hoss' the shading's brought out the musculature. The camo' on the headless horseman is top notch too. 🤟🥸🤘

Rui S
Hi, mates, sorry for my late reply, but I prefer to do it with some new uploaded progress photos. Gettting near to the end on this two. Hope you like them.
@ Gary Victory, Thank you very much for stoping by and nice comment;
@ Alec K, Thx again for your words, the rider come back with proud;
@ Doubtingmango, Thx for looking. Now I think he is redy for another kind of Halloween, if you get my drift;
@ Desert Marlin, thank you for your kind words, suport and Encouragement. Apreciated;
@ Mark Sherwood, Thank you for your nice comment. I know nothing about horse anatomy, so I follow the reliefs and I Think I can be happy with the result.

Desert Marlin
Just looks awesome! The progress is excellent!

Guy Rump
Superb so far!! 👍

Rui S
@ Desert Marlin, Thank you a lot for your Great suport.
Almost done as intended in photo 19 (June 20, 2016, 😮).
A few more bits and pieces and I can finaly close this chapter. That makes me very happy.

Neuling
Congrats!

Robert Podkoński
👍

Guy Rump
A beauty! 👍 Congrats!

Skyhiker
Nice one. Congratulations.

Guy Rump
Great job! 👍

David Taylor
Yuuup.

Mark
Very nice work! 👍

Augie
Very nice model of airseeker.

James C
That's an impressive looking build 👍

Christopher Bodlak
Great build where did you get then engine conversion from

Richard Foot
They were in the Combat Conversions set Christopher

Skyhiker
Very nice. Did the kit come with the older and longer Pratt & Whitney JT3D engines?

Curatorm
Awesome...

Guy Rump
Excellent job! 👍

Miguel Vaquero
Following!!

Matti Thomaes
Watching

Jan Peters
Welcome mates

Jan Peters
Made a careful start. Parts are a mixed bag, some very nicely done, some a bit crude and oversized.

Jan Peters
Any thoughts on how to make the anti radar material on the snorkel?

Matti Thomaes
Can't help you there Jan, I didn't even know there was anti-radar material on the snorkel...

Jan Peters
I had a go at it, looks more crude in the pictures then it looks in real life, might do some fine tuning later

Sebastian Meyner
Nice work so far Jan 👍 Following with interest 👀

Jan Peters
Thanks Sebastian, and welcome 🤗

Jan Peters
It would be nice to see someone do a 3d printed snorkel someday.

Guy Rump
Looking great, following. 👍

Cuajete
Very nice Hien 👍
Congrats!

Franck Drebin
Thank you Cuajete, it's a really nice and enjoyable kit, and using Tamiya camouflage decal sheet is helpful when like me, you're not a master of the Airbrush 😊

William Joel
Nice work, love the camo. The silver finish and panels came out great. Question - why the black primer than the tan?

Guy Rump
Very impressive build, congrats 👍

Franck Drebin
Thanks William Joel, the black primer was Mr Finishing Surfacer 1500 from Mr Hobby. For the decals and the weathering (very light in fact) I used the Prince August Satin spray varnish. It was the first time I used that products and I'm really happy with the result.

Franck Drebin
…sorry William Joel, the black primer is to get a better result with the aluminium color in order to achieve a metallic finish. I often read that but of course, it depends on what you're looking for.

Franck Drebin
Thank you Guy Rump 😊

Neil
Very nice work indeed Franck 👍 agree with William the camo is outstanding! 🙂

Franck Drebin
Thank you very much Neil. Cheers 😉

Juskifo
Super taf camarade

Finn
Nice detailing and even better paint job

BC NRA
Beautiful! I have that kit in my stash. Your excellent job on building your Ki61 has inspired me to build that next. (As soon as I finish my IL-2.)

Franck Drebin
Thank you BC NRA. I'm glad if I encourage you to build this splendid kit. You will enjoy. Thanks Juskifo and Finn too for your comments 👍

Kyle DeHart
That camo has a wow factor for sure. Awesome

John Wilkes
I bought the 1/48 scale version without the full decals. Freehanding the camo job taught me a new respect for the brush. This is a beautiful aeroplane and your work makes it look great. Thank you for posting your work.

BC NRA
I just started Tamiya Ki 61.

Franck Drebin
Copied BC NRA! I will follow that when you will post it.
Thanks Kyle and John. Indeed, doing this camo without decals is a real challenge.

Catalin Oprea
Nice build, congrats! I didn't expect decals for this cammo 🙂. I did mine with airbrush.

Franck Drebin
Well done Katherius, it's definitely not an easy job 😉👍

Pierre Pierre
tres joly peinture super soignée
!

Murtaza Ismail
Nice Camo!

Franck Drebin
Thank you Pierre and Murtaza 🙂

Andy Ball
An almost lizard-like look: great way to show off the lines of this fighter. Great job!

一生还一夜
The camo looks awesome!

Mick Burdett
Great Camo have to try Tamiya camo sheet too

Pietro De Angelis
Amazing work, congrats!

Franck Drebin
Thank you mates. Tamiya decals don't have a good reputation and indeed, they are very thin and challenging by moment. The most diificult part was the fuselage. I had to cut them in two parts to avoid a fatal twist. But at the end, I'm very happy with the result.

Isaac Kite
An extraordinary Hien. She looks ANGRY! congrats.

yeon sung Jung
What a wonderful piece of work!!

Rui S
Great Paintjob 👍
I think photos 29 or 30, would be beautiful teasers 🤔

Franck Drebin
Thank you for your kind comments. Good remark Rui. Indeed, it's not mandatory to follow the chronological evolution with the photos 😉

Mark Sherwood
Nice Hien Frank. Like the camo'. I find Japanese aircraft somewhat under represented in our hobby, it seems a few of us are trying to rectify this. Spot on 🤟🥸🤘

Neil
Hello Franck 👋 looks really good mate. Impressive 👍

Mr D
Hi Franck 👋
Brilliant job on the Paint job, Looks great 👍👍

Skyhiker
Nice f-16. Which kit did you use? I wasn't aware that the CJ's are covered in 'have glass' or is that artistic license?