Стрічка новин
John O'Shaughnessy
володіє цим предметом
володіє цим предметом
The Complete Book of Fighters An Illustrated Encyclopedia of Every Fighter Aircraft Built ...
William Green, Gordon Swanborough
1998 28 July, 11:22
Bernhard Schrock
додав новий фотоальбом.
додав новий фотоальбом.
230 зображення
Westland Seaking Mk41 German Navy 89+63 (50 Jahre)Новий: 28 July, 11:20 1:48
The last big hurdle is taken: clear parts for the cockpit in place without mess.
114 30 March, 15:44
Bernhard Schrock
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
3 April, 05:00
bughunter
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
10 April, 16:20
Bernhard Schrock
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
12 April, 05:52
Hanno Kleinecke
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
18 April, 05:02
JAM-SCREW
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
22 April, 17:06
Bernhard Schrock
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
29 April, 09:32
Robert
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
29 April, 09:39
Michael Kohl
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
29 April, 10:43
Bernhard Schrock
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
29 April, 13:08
Gordon Sørensen
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
29 April, 13:27
Florian H.
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
29 April, 17:47
Bernhard Schrock
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
2 May, 16:10
bughunter
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
8 May, 09:42
Dan Parsons
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
8 May, 09:45
Bernhard Schrock
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
8 May, 15:13
Bruce Huxtable
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
8 May, 16:25
Hanno Kleinecke
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
18 May, 20:01
Bernhard Schrock
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
19 May, 06:17
gorby
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
26 May, 14:27
Alec K
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
27 May, 12:21
Hanno Kleinecke
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
27 May, 18:33
JAM-SCREW
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
28 May, 07:02
David Taylor
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
28 May, 14:28
bughunter
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
30 May, 14:44
Bernhard Schrock
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
1 June, 08:20
Michael Kohl
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
4 June, 17:09
Bernhard Schrock
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
8 June, 18:37
Tom Spiegelberg
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
9 June, 15:13
Bernhard Schrock
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
10 June, 08:18
Dietmar Bogatzki
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
17 June, 07:25
Bernhard Schrock
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
17 June, 18:24
JAM-SCREW
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
18 June, 08:41
Bernhard Schrock
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
18 June, 18:03
Bruce Huxtable
The interior is a delight to the eye, for sure. Inspirational modelling🙂
The interior is a delight to the eye, for sure. Inspirational modelling🙂
18 June, 18:28
Bernhard Schrock
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
26 June, 12:27
CaptGPF
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
30 June, 02:56
Bernhard Schrock
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
30 June, 12:13
Spanjaard
i really love the details of the rack for electronic equipment & foldable seat.
i really love the details of the rack for electronic equipment & foldable seat.
30 June, 19:07
Hanno Kleinecke
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
5 July, 08:12
Bernhard Schrock
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
10 July, 17:18
Alec K
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
14 July, 12:40
Dietmar Bogatzki
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
15 July, 11:19
Hanno Kleinecke
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
15 July, 18:20
Qwertzel
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
20 July, 16:58
Bernhard Schrock
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
20 July, 18:26
Qwertzel
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
20 July, 20:23
Alec K
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
27 July, 13:22
mballas
хоче цей предмет
хоче цей предмет
Antarctica Observation Ship
Soya Antarctica Observation 2nd Corps. Hasegawa/Pontos Model Hasegawa 1:250
HP001 (68080) 2023 Нові деталі 28 July, 11:18
Jasper Breur
позначив цей предмет як замовлений
позначив цей предмет як замовлений
Su-25 Flaps
All Scale Kits (ASK) 1:48
48055 28 July, 11:16
Dieter Bihlmaier
додав новий фотоальбом.
додав новий фотоальбом.
6 27 July, 19:27
Bernhard Schrock
Not sure, but looks like the mission to Alpha-Minotauri 7-A?
🙂 Great idea and top pictures.
Not sure, but looks like the mission to Alpha-Minotauri 7-A?
🙂 Great idea and top pictures.
28 July, 06:41
CaptGPF
додав новий фотоальбом.
додав новий фотоальбом.
70 зображення
Mandalorian Razor Crest - Revell - Complete - for now…1:72
I have some 1/72 scale aircrew from Hasegawa that I will add to the base diorama - but that is after I recover from the ...
Проект: Mandalorian Razor Crest - Revell
Scratchbuilt
78 15 April, 15:52
CaptGPF
To light up the engines, you will need to drill out the square areas around the exhaust.
To light up the engines, you will need to drill out the square areas around the exhaust.
15 April, 16:21
CaptGPF
Hi Michael! I bought the LEDs from Amazon and strung them together on my own. I used a total of 6 parallel circuits with each one drawing about 9V.
I used a rechargeable 9V from Amazon - EBL USB Rechargeable 9V Lithium Batteries - 5400mWh Long Lasting LI-ion Batteries with Micro Charging Cable - and ran a Micro-USB extender to the top of the cargo bay so I can seal the kit, and recharge it later. Having put in close to 40 hours on this kit, I wanted the lighting to last. 😜
Hi Michael! I bought the LEDs from Amazon and strung them together on my own. I used a total of 6 parallel circuits with each one drawing about 9V.
I used a rechargeable 9V from Amazon - EBL USB Rechargeable 9V Lithium Batteries - 5400mWh Long Lasting LI-ion Batteries with Micro Charging Cable - and ran a Micro-USB extender to the top of the cargo bay so I can seal the kit, and recharge it later. Having put in close to 40 hours on this kit, I wanted the lighting to last. 😜
15 April, 17:37
CaptGPF
Thanks Harald, Nark Robin and DerMattes. The oil weathering just dried and I'm closing it up with the final clear coat. Will post the final shots when I can handle it again without leaving and fingerprints! 😜
Thanks Harald, Nark Robin and DerMattes. The oil weathering just dried and I'm closing it up with the final clear coat. Will post the final shots when I can handle it again without leaving and fingerprints! 😜
16 April, 15:10
Gareth Lloyd
Looking really good Capt. 🫡. I had exactly the same issues with the landing gear.... the 'strut' just didn't want to glue and ended up snapping, I pushed a pin up through it to try and strengthen it but it's still really wonky. Tempted to have a go at the AMT kit to see if that's any better?
Looking really good Capt. 🫡. I had exactly the same issues with the landing gear.... the 'strut' just didn't want to glue and ended up snapping, I pushed a pin up through it to try and strengthen it but it's still really wonky. Tempted to have a go at the AMT kit to see if that's any better?
17 April, 17:08
Gary Kitchen
Lovely stuff. The innards look fantastic with the black basing. Loving the mix of alloys to the exterior and the heat wear on re entry is inspired and something I completely missed that on mine.
Lovely stuff. The innards look fantastic with the black basing. Loving the mix of alloys to the exterior and the heat wear on re entry is inspired and something I completely missed that on mine.
17 April, 20:02
Giannis Kaltapanidis
Although not a fan of Sci-Fi, I have to admire your metallics! Great job!
Although not a fan of Sci-Fi, I have to admire your metallics! Great job!
18 April, 10:48
CaptGPF
Thanks everyone! I learned a LOT from everyone posting their builds on these forums - so I'll be passing the credits to everyone.
@Gareth - from what I can see, the AMT looks lacking on the interior details, but the engines are made to be lit up in flight mode. Didn't see a build with the landing struts.
@Gary - the idea of the re-entry staining came to me when I just happened to see the burnt metallic paint on the rack! I wouldn't have thought of it otherwise. 🤔
@Finn - thank you! But I have a long ways to go to your mad diorama skills!
@Giannis - I had some challenges with the metallics - the Xtreme Titanium looked too "Plastic" to me, so I had to apply a thinned down Polished aluminum to make it shine better.
One thing I forgot to mention is the need to sand down the engine nacelles - some spots were really rough / pebbly - so sanding it down prior to laying down the metallics will save you pain and suffering later 😀
Thanks everyone! I learned a LOT from everyone posting their builds on these forums - so I'll be passing the credits to everyone.
@Gareth - from what I can see, the AMT looks lacking on the interior details, but the engines are made to be lit up in flight mode. Didn't see a build with the landing struts.
@Gary - the idea of the re-entry staining came to me when I just happened to see the burnt metallic paint on the rack! I wouldn't have thought of it otherwise. 🤔
@Finn - thank you! But I have a long ways to go to your mad diorama skills!
@Giannis - I had some challenges with the metallics - the Xtreme Titanium looked too "Plastic" to me, so I had to apply a thinned down Polished aluminum to make it shine better.
One thing I forgot to mention is the need to sand down the engine nacelles - some spots were really rough / pebbly - so sanding it down prior to laying down the metallics will save you pain and suffering later 😀
19 April, 17:06
CaptGPF
Stick a fork in it, this one's done. I'll update this later when I get around to building a base for it with some figures. This was a decent kit, but with a little more thought and effort, Revell could have made this a really cracking kit. I would definitely recommend this kit, but you will need a lot of patience when tackling the landing gears and ramps - on top of the numerous kit defects, but hey, if I can build it, anyone can! 😀
Stick a fork in it, this one's done. I'll update this later when I get around to building a base for it with some figures. This was a decent kit, but with a little more thought and effort, Revell could have made this a really cracking kit. I would definitely recommend this kit, but you will need a lot of patience when tackling the landing gears and ramps - on top of the numerous kit defects, but hey, if I can build it, anyone can! 😀
20 April, 06:54
Miguel Vaquero
This is a work of art!! Beautifully built. Really enjoyed the way you explained it
This is a work of art!! Beautifully built. Really enjoyed the way you explained it
20 April, 19:54
Markus Helmers
How did I miss this one? Gorgeous work, makes me want to build another! Probably going to do the n1 first, though.
How did I miss this one? Gorgeous work, makes me want to build another! Probably going to do the n1 first, though.
22 April, 13:09
Michael Razz
WOW Amazing show u have here and that for a revell model!Did you contact the company of Revell that you have one of a kind?
WOW Amazing show u have here and that for a revell model!Did you contact the company of Revell that you have one of a kind?
26 April, 17:41
CaptGPF
LOL! Thanks Razzie, but I don't think they will appreciate my various Boeing QA failure references! 😜
LOL! Thanks Razzie, but I don't think they will appreciate my various Boeing QA failure references! 😜
27 April, 02:28
CaptGPF
Thanks John's, Robin and Rob (esp the This is the Way!)
I had to ruin a nice F-104 to figure out how to do the metallics just right! 😜
Thanks John's, Robin and Rob (esp the This is the Way!)
I had to ruin a nice F-104 to figure out how to do the metallics just right! 😜
3 May, 20:57
Baptiste Souillart
C'est un tout autre level, bravo ! Le rendu est impressionnant ! Tu as bricolé des Kits Led ou ce sont des solutions clés en main ?
C'est un tout autre level, bravo ! Le rendu est impressionnant ! Tu as bricolé des Kits Led ou ce sont des solutions clés en main ?
28 July, 11:09
S B
додав новий фотоальбом.
додав новий фотоальбом.
7 зображення
RIAT 23 // Polish Air Force Su-22M4Новий: 28 July, 11:14 1:48
Проект: Su-22 Polish AF // Riat 2023
28 July, 11:12
Cristian A
додав новий фотоальбом.
додав новий фотоальбом.
2 зображення
Zvezda KA-52 “Aligator” Ukraine War - build progressНовий: 28 July, 11:13 1:72
Russian Air Force Pilot training facility :)
Проект: Ka-52 "Alligator"
28 July, 11:08
Igor Dujmusic » Запити щодо функцій
I can't see map for shops locations on hobby shops locator? Anybody have same issue? I see just black window.
I can't see map for shops locations on hobby shops locator? Anybody have same issue? I see just black window.
28 July, 11:12
Agustin Prellezo
додав новий фотоальбом.
додав новий фотоальбом.
16 23 July, 16:17
Agustin Prellezo
Hi, Cristian, I had problems with the varnish, the result if you see it closely is not so good. Thanks!
Hi, Cristian, I had problems with the varnish, the result if you see it closely is not so good. Thanks!
23 July, 17:52
Cristian A
Looks great to me Augustin. I have recently purchased the kit and I'm thinking how to make that digital cammo. Any tips?
Looks great to me Augustin. I have recently purchased the kit and I'm thinking how to make that digital cammo. Any tips?
23 July, 18:57
Agustin Prellezo
With the plastic mask is not difficult. I made some mistakes, and these masks can be used several times if required.
With the plastic mask is not difficult. I made some mistakes, and these masks can be used several times if required.
27 July, 22:07
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo