Стрічка новин

Guy Rump
Following 🙂

Villiers de Vos
Very nice work.

Guy Rump
Very impressive. 👍

Michael Kohl
Nice

Rui S
Great paint job 👍

John E
Impressive work!!

Mr James
Wow. What an excellent build. You have nailed the weathered desert look. Love the inscription on the drivers door. Brilliant

Bogicevic Vladimir Автор
Thank's for comments guys..

Neuling
Same as Mr James. I´m not in doubt! But this work is my cup of tea.

Bogicevic Vladimir Автор
😁

Villiers de Vos
Very nice work and weathering.

gorby
Lovely job!

Bogicevic Vladimir Автор
Thank's gorby.

Guy Rump
Very impressive job! 👍

Bogicevic Vladimir Автор
Thank's Guy.

Spanjaard
truck? I am curious what you do with it

Rod -
Maybe there is some mold release still on the plastic. Instructions often say to wash parts. I never do and never have had trouble but I guess it's possible?.

Spanjaard
MS K did that already 😉 see picture 1

Rod -
Lol ok... so its not that.

Martin Oostrom
That's a bummer

Goldman
Strange. Never had such issue with Italeri truck panels before. Don't think it is ABS - try to glue some sprue bits with Tamiya Extra Thin. I don't think this glue will work on anything that is not styrene. Never used Gaia primer - only using Mr. Surfacer and Mr. Priming Surfacer. Is the Gaia primer lacquer or acrylic? Not sure if you have already did it but try to scuff the panels with Tamiya 3000 or 2000 grit sanding sponge (or similar) before priming. Another idea worth trying is to clean the panel with IPA - maybe the release agent Italeri used don't come off easily with just water and soap.

Alexander Grivonev
Truck with upgrade? I am so in...

MS K Автор
Oh no guys, this time it's just a straight build...
@Goldman - Yeah As you said, it doesn't seem to be ABS, and I sanded it and used a lacquer surfacer, but strangely the paint didn't stick. Washing with IPA is a good tip, thanks.

Bozzer
Late to the party! Apologies, work has taken over my life 🙁
I'm definitely in for the duration, on this one!

Bozzer
The paint is definitely your issue. Most of my trucks are painted with Tamiya paint. I've never had much luck with model air paint. AK doesn't work for me either. I find it best to use a primer, the lads have already pointed out the best, but I've also used Tamiya primer from a rattle can, as well as decanted. However, I've also used both Tamiya and Mr Colour, straight onto the plastic. Some colours over here, are hard to match, so I go to the automotive store and get the colour I want, and also the matching primer. Again, I decant these into a glass jar, and I leave the lid loose, to allow the gasses to fully disperse from the paint. After a day, I simply add a little cellulose thinner and then mix it up, and airbrush it.

Michael Kohl
Following

Rui S
I'm in 😎

Goldman
Interesting pattern! Can wait to see it assembled

Goldman
Custom decals - that's new. Really nice design. Looks like a huge amount of work

Goldman
Great idea scribing the part numbers. I used a POSCA marker to write them (usually the last digit is enough) but it is too easy to erase the POSCA marks by just handling the parts.

Goldman
Bummer with the fuel tank. I think all metallic paints are hard to mask. Sometimes it works most times you get these (unwanted but very realistic) "chipping" effect.
For fuel tanks I gave up "proper" metallic and just use Mr. Hobby Silver C8. It is not a metallic paint but it looks very good and very durable. Got this tip from Jan Rosecky excellent book "The Complete Guide to Truck Modelling"

Michael Kohl
When you sand for gloss, don't you have difficulties that when sanding red areas in your instance, the dust ruins the white surfaces?

Andre Louis
I guess he used a top layer of clear gloss which was sanded and then polished. So, effectively the colors are protected by the clear coat

MS K Автор
@Andre - Yeah, that's correct. I had clear coated twice before sanding. 🙂
@Michael - And in that case, you can erase it by gently wiping it with a compound.

Michael Kohl
Ah. Thanks for the inside. I understood that you sanded the colors to prepare them for a clear coat. Hence my question. Now it's clear to me.

Bozzer
@Michael.
;) Clear to me! That made me chuckle, probably too much 🙂

Martin Grafeneder
Amazing Work 👍

bughunter
Very clean impressive work 👍

Goldman
Italeri do have this kinds of stupid random errors in its kits. Annoying, but since Italeri is the only company that still offers European plastic moulded kits of trucks I guess beggars can't be choosers.
I *think* that there is no clear decal film between the lettering for the tyres to improve appearance. It will be almost impossible to hide the clear film on the rubber tyres. Not sure that having separate letters is the best solution. If you want I think MBM sells PE templates to airbrush the words on tyres.

MS K Автор
@Goldman - I'm ok without it. I don't care anymore. hahaha!!! Thanks bro~ 😄

Spanjaard
if the decals are still in the sheet (misaligned but there) its easy to scan, convert to vectors, align, make masks in vinyl and try to paint them with mask 😉 and if decals are gone, well, MS K knows how to vector them, and has the cutter already available 😉

Spanjaard
i see your post now, problem solved 😄 😄

MS K Автор
@Spanjaard - I thought about making my own decals, but I was too lazy to change the toner to print white. LOL
And since the base color of the self-made decal shows through a lot, it is better to avoid attaching it on top of a dark color. 😉

Spanjaard
i did not say anything about making decals, but masking to airbrush the missing decals 😉

Bozzer
I'm loving what I'm seeing.
Honestly, my expectations were high, but you've done this "stock build" with the right amount of cheeky adaptations. It's not a clever, "this is what you do", it's more of a, "this is the correct way, to make it better"
And like all your other builds I've followed, the MS touch, is fully endorsed 🙂

Desert Marlin
Gotta watch this one!!!

Desert Marlin
Looks great so far!

Petr Kreps Автор
Thanks Desert😉

gorby
I agree. Very nice work so far.

Guy Rump
Following too! 👍

Petr Kreps Автор
Thank you gorby and Guy Rump😉

Desert Marlin
Oh... There it is! Taking shape nicely!!!

Michael Schubert
How did I miss the start of this one? Looks sweet so far! Pulling up a chair 💺

Desert Marlin
Large airplane. Nicknamed "The Whale" because it was one of the largest aircraft to ever trap on an aircraft carrier! This is a great one to watch!

Thomas Bischoff
looks good 👍

Desert Marlin
Lots of good shading work!

Petr Kreps Автор
Thanks Thomas and Desert.

Desert Marlin
Not sure if you have seen what Trumpeter did with the RA-5C... it's kinda rough too!

Jakub Fiala
Pěkně nafučeno 👍

Petr Kreps Автор
Hi Desert, I haven't checked Vigilante yet, but I believe that Trumpeter did their best to challenge us😁😁 After this one, I will take a break from big planes and enjoy some fighters from Eduard😉

Petr Kreps Автор
Dekuji Jakube😉

Desert Marlin
Thanks Petr! Yes, I do the same. I have built a couple of fighters from Eduard and Tamiya lately! My Vigilante came out good, but it was a ton of work to keep the spine straight on it.

Maciej Bellos
That's some impressive work on this beast. Well done!

Johannes Schendlinger
That is looking really promising !

Nathan Dempsey
Looking great 🙂

Petr Kreps Автор
Thank you guys for all the comments and likes😉

Gerald
👍

Desert Marlin
Excellent progress!!!

Jakub Fiala
Great work with masks, Petře! Nicely clean.

Petr Kreps Автор
Thank you Jakube, it is not perfect, there are some places they need final touches. I struggle with sharpness of the masks, maybe the plotter I have is not that precise. I need to find the proper setting and better way to construct masks.

Jakub Fiala
That surprises me. It looks great in the photos. So, good luck with setting up and constructing masks

bughunter
Great work 👍
Depending on the size of the elements wo be cut the drag knife of the cutting plotter has its limits. But yes, such a "jump" inside a line (the D in pic74) should not happen. A vector graphic program is a must (I use Inkscape). But it depends also on the masking material, each one has its own (dis-)advantages. For example "Oramask 810" allows fine details, but has problems with surface details.

Petr Kreps Автор
Hi bughunter, thanks for comments and I fully agree. I struggled with precision of cutting. I need to invest my time and find optimal graphic program and setting of the plotter. I actually have Inkspace installed but I didn't use it this time. Regarding the material I use Oramask 810, which I like to work with. In the end I gave up trying and wanted to progress in built ignoring mentioned issues with mask.

Guy Rump
Following with interest. 👍

DerMattes
Watching 👍

Spanjaard
nice

gorby
Excellent Dinah Tino, nicely weathered.

Tino Delgado Автор
Thanks both for the kind words... It's a little kit, with some problems (the moulds show their age in several spots), but with some effort it can be transformed in to a Dinah. Cheers!!

Felix
Great weathering, you got the most out of this old kit!

Major Oak
Great build love that scheme built the tamiya 1/48 many years ago looks so much better than in the deep green camo ell done

Tino Delgado Автор
Thanks both for the kind words... I don't build many planes, and I prefer these old ones with not many pieces, although some times they are tricky to build...

Rui S
Muito bem feito 👍

Tino Delgado Автор
Rui,
Muito obrigado pelas simpáticas palavras, que servem sempre de incentivo!

Mark K
Very nice indeed!

gorby
Excellent work!

Tino Delgado Автор
Thanks both for the kind words...
Cheers!!

Bozo
Good job with this old kit.
I especially like the use of the tape tam for the reinforcement of the verandas of this plane

Dave
Great looking aircraft.

Tino Delgado Автор
Thanks both for the kind words... Yes @Bozo, I used Tamiya tape for the frames of transparent parts- Originally the frames were almost not existent, so I had to cut thin strips and place then carefully!
Cheers!!

Vincent
Great work!!

Guy Rump
Good job! 👍

Tino Delgado Автор
Tino Delgado
Thanks both for the kind words... it gives incentive to keep building!! 🙂
Cheers!!

René (Lord Bilbo) Bartholemy Автор
Thanks @Desert Marlin!

René (Lord Bilbo) Bartholemy Автор
Advancing slowly but steadily. 😇

gorby
Nice work so far.

René (Lord Bilbo) Bartholemy Автор
Thanks gorby, really appreciated!

René (Lord Bilbo) Bartholemy Автор
Thanks Martin.

René (Lord Bilbo) Bartholemy Автор
Thanks @Villiers de Vos!

René (Lord Bilbo) Bartholemy Автор
Thanks @Alberto Michieletto!

Ben M
I also puttied the wings to the fuselage of my V-1 but I'm not convinced that's right after examining the one in Berlin-Gatow: flickr.com/gp/benmesander/Z7pTo7P3q1

René (Lord Bilbo) Bartholemy Автор
Ow! Thanks for the heads up.

Cristian A
Following!

Guy Rump
Looking good, following. 👍

bughunter
Another one of those crazy scratching people 👍

Robert Podkoński
Look who's saying this 😄

Simon O'Gorman
Some of the detail work I see on 1:72 kits on this site is unbelievable - this is another one - fantastic work Davy 👍

Denis Dogadov
I like your serious approach.
I have assembled two Fokker D.XXI 1/72. One of them was converted from the Novo set. The second one is from Special Hobby
[img1]
[img2]

Denis Dogadov
My version of the engine and hood. I took the details for revision from the Blenheim model Novo.
[img1]
[img2]
[img3]

Rui S
Excellent 👍 I'm in 😎

Mr D
Very nice start 👍👍 like it

Cuajete
Great!

Alec K
I like that cockpit 👍

Davy Vos Автор
Thank you very much every one! And looks really great Denis! 👍🏻👍🏻

Jan Peters
Excellent detailing! Following for sure 👀

David R. Meizoso
Your cockpit work deserves an ovation. Astounding build!

Alec K
Wow, this thing is almost done! Looking really good 👍

Villiers de Vos
Detailed work. Booking my seat.

Cuajete
Fantastic painting job 👍
Well done so far!

Tom M
I like the model very much

Davy Vos Автор
Thank you very much all! 😊🙏🏻

Jennifer Franklin
That is some impressive painting!

Skyhiker
I'm late

Finn
Well done indeed!

Munkyslut
Lovely detail, cockpit is perfecto👌

Villiers de Vos
Fantastic work on the interior. The exterior paint work is also very good.

J35J
Late in, great build & scratchwork!👍🏻

Davy Vos Автор
Thanks all! Really appreciated!

Michael Kohl
Very high quality

Mark K
Truly beautiul,

Skyhiker
Your seatbelts really came out nice for this scale. Kind of amazing. You're a wizard.

CaptGPF
Agree with Skyhiker - amazing!

Guy Rump
I'm late, looking forward to final result, looking excellent! 👍

Steve Desarzens
It looks really good, congrats for this amazing result 🤗
Love this airplane, built my version 2 years ago but in 1/48 scale

Hans-Jürgen Haag
Nice build!🥰

Robert Podkoński
The appropriate name should be "MisterCrap", Mina... Better stay away from these kits (from "Big Model" kits as well...)

Urban Gardini
I concur with Robert! Stay well away from MisterCrap...

Mina Ro Автор
I do stay away from them. I got fooled by their F-84 kit and then found out it was a bad re-issue and as I said before. The decal sheet basically disintegrated in water and was useless. I was just commenting on how bad these kits are when I saw this kit advertised on my wall.

Calvin Gifford
Just double checked to see if I had any of the other boxings in my stash. Pity because I was eyeing it - there are so very few ASW Huey kits out there. Had several friends that were 'Bubble Hunters'.

Martin Oostrom
The Bluesmobile!

shadowlight
AFAIK the Bluesmobile was a 74 Dodge Monaco

Snake Plissken
Right, the Bluesmobile is as you say and easily verified in mere seconds. Thanks. The '74 is a better looking car in my opinion with a more pleasing horizontal layout of the headlights making a big difference.

Martin Oostrom
And of course you're right.

Rui S
Nice work 👍

gorby
Nice work.

Guy Rump
Very nice indeed. 👍

J35J
Great work!👍🏻

Rui S
I agree 👍

Guy Rump
Like it! 👍

Roman D. Автор
@Guy Rump thank you!

Michael Muschalik
What do you think on the fit of the tracks in to the mudgurads?

Harry Eder
Nice start Daniel! 👍

Daniel Mysak Автор
@Michael
The fit is really tight. I´m not sure if it would have fitted oob as I didn't tried it before thinning out the mud guards.

Daniel Mysak Автор
With a bunch of etched parts the construction is finished. Some parts as wires and handles are added by myself.

Hanno Kleinecke
What a pretty bird ! Love the way you modulated that colour, postshaded ? I took it for 1/48 at first, superb result !

Olivier
Bel oiseau en effet...

Robert Podkoński
Absolutely beautiful!

Michael Kohl
Indeed

Erik Off
A beauty! 👍

Bernhard Schrock
A superb result!

Romain Sablou Автор
Thank you guys ! 🙂
@Hanno : yes, postshaded with a slightly lighter blue

David R. Meizoso
Outstanding!

Robin (WhiteGlint)
A real beauty. Nice play of colours and materials. 👍
Those are some shiny wings.

Zbynek Honzik
Fantastic result!

Kyle DeHart
Awesome!!

LucLuke B
You can be proud, very nice.

Lochsa River
Super clean...great work

Vincent
Very clean. Great work on the metal efdects. Also really interesting subject. Great work!!!

Pierre-Christian Baudru
Il est magnifique grand Bravo !!!

Hans-Jürgen Haag
👍👍👍👍super work!

Neuling
Very interesting and beautiful!

Łukasz Gliński
Lovely boat 👍

Romain Sablou Автор
Thank you all ! Merci Pierre-Christian 😉

Alec K
Beautiful build 👍

Marc Verlot
Very impressive

Thomas Bischoff
An Italian beauty 👍

Mr James
A beauty on a small scale

JJoStar
Cute!

Curatorm
Lovely model.

Romain Sablou Автор
Thanks guys, much appreciated 😉

Rui S
And another Beauty 👍

Pietro De Angelis
Beautiful!

Christian Bruer
Not only an unique model, but also an excellent work and finish 👍

Romain Sablou Автор
Thanks a lot ! 🙂

J Hess
Amazing detail! Beautiful!

Finn
Beautiful!

Villiers de Vos
A real head turner.

Neuling
So it is. 👍👍

Hans-Jürgen Haag
Wow a Beauty! Porco Rosso would be happy!😎🥰

Arseny K.
Wow!! This is so beautiful!

Romain Sablou Автор
Many thanks mates !

Thomas Bischoff
Nice to see this at the Montrouge exhibition - much more impressive life than on pictures👍

Mark K
Delightful!

Guy Rump
Great job! 👍

Romain Sablou Автор
Thank you boys ! 🙂

Thomas Bischoff
I'm in - nice show 👍

Sergej I
Looking good 👍!

Rich K.
Awesome work! Learning a lot from your posts and looking forward to the final result!

CaptGPF Автор
Thank you everyone!

@Thomas! Looking forward so seeing your Douglas build!
@Sergej- your F-35 is looking good! I heard that was a bad kit, but didn't realize it till your post!
@Lorraine - Your builds are always amazing! Using a laser cutter to create your latest Spitfire is brilliant!
@Rich - looking forward to seeing another dual build with you and your wife!

Dietmar Bogatzki
Fantastic start Capt. 👍

CaptGPF Автор
Thank you Dietmar! I plan to have the maintenance hatches open on this puppy, but not as impressive as your cut-out Millenium Falcon!

CaptGPF Автор
Sloooooooow progress, the main painting is done, now onto the munitions!

Paul Moore
Will be watching eagerly!

Rui S
Looking Great 👍

Villiers de Vos
Very nice progress.

Sergej I
In photo 24, are you following a reference with the yellow de-icing surface? I thought they were only yellow on slats...

CaptGPF Автор
Thank you Paul for the notes on the A-6!

@Rui - watching you Mariupol build with interest!

@Villers - love your cars, and watching your Maharaja edition with great interest!

Hi Sergei - I referenced it from the paint schemes in the instructions and checked the photos on the internet - and most of them have the yellow de-icing on the leading edge of the wing roots. After taking a closer look, seems like I missed the tail! 😀. Will work on that as I start the weathering. 😀

gorby
Interested to see how this will turn out. Doesn't look a great kit.

Villiers de Vos Автор
The kit shows its age. I hope, with a bit of work will turnout alright.

Mr D
Very smart... Great job 👍👍

Michael Kohl
Following

Mr D
Will be keeping eye out for updates.
The messy glue tubes, the Beriev lm building came with a little pot of glue that you Peirce with pin on one side 🤣
Long dried up.... I did use it back when l was a kid....lots of sticky thumb prints.
Nice project 👍

Villiers de Vos Автор
Gentlemen, thank you all for your kind remarks. I have been chipping away slowly. The part count of the kit is not that high, but the version I chose as well as the paint scheme results in a lot of challenges to my skill level which I thoroughly enjoy.

Mr D
Hi Villiers 👋
Your doing a good job...it looking really good 👍
Nice kit... who is the manufacturer??

Villiers de Vos Автор
Hello Mr D. The manufacturer is Gakken.

Mr D
👍 Thanks Villiers ...l like to look different manufacturers up n see there range 👍

István Szücs
So much work, it's awesome! It turns out well!

Mr D
Heading towards being a nice model this one, like the engine and interior work.
Good little kit 👌👍

Villiers de Vos Автор
Thank you Mr. D for your comments. The kit certainly shows its age. I remain a sucker for the larger scale classic cars.

Stéphane Jayet
Promising one !

MS K
Oh, This manufacturer I've never heard before.
I don't think it will be easy. 👍

Villiers de Vos Автор
I have experienced several paint disasters. Enamel paint kept on forming scales. In the end I had to strip the paint back several times to the primer level. Progress should be quicker from here on.

Mr D
Hi Villiers 👋
Glad your getting on track a bit now, do you think the plastic reached with the paint ?
Nice to see it taking shape 👍👍

Villiers de Vos Автор
Hello Mr D
I started off with a primer, Mr. Surfacer 1500 thinned down with Mr. Color Leveling Thinner which came out just fine.
I believe that the paint layers were perhaps too thick working with enamels. I believe that I should do thin layers (well thinned) stretched over more than one day.

Mr D
Annoying when the hard work is undone! ... Just have to pull it back ....and you done that, hopefully be good going forward 👍
I only use water based acrylics, Humbrol and Deluxe gloss dried nice n hard after few days, some of the other brands are bits soft!!
I've had to many dramas with Enamel 🤣 but l expected it's a better option for a car ?
I mainly use Vallejo, AK and recently been using the new ICM paints (very impressed 👍)
Did you have to do some Chrome n conducive paint striping on this one ?
👍👍

Jennifer Franklin
late to the party but following

Lorraine Lin
Still remember the smell of tube cement😜

Guy Rump
Same as Jennifer! 👍

Mr D
@Lorraine ...yes and the glue had a habit of going everywhere but on the model 🫣🤣
Looking nice Villiers 👍 taking shape now,l ike the leather tone of the leather seats 👌

Dean Cikins
That is a beautiful machine. Nice detail

Dave
Your car is really taking shape, love colors you have chosen. As for the tube glue, i remember as kid thinking that getting a model kit with supplied glue was great until you open it. (That was the first mistake)

Guido
Checking in to get the updates 👍🏻🙋🏼‍♂️

Mr D
Getting Leather to look right is not easy " But you more than succeed on the door cards"
Doing some nice work 👍👍

Villiers de Vos Автор
The Mercedes is on its own wheels at last. I am now tackling the light clusters.

Jennifer Franklin
Thanks for documenting the surfacer process. Looking very nice too!

Mr D
Looking great Villiers 👍
The Tire's look very original and radiator grill turned out very good.
How do you get on for the Hood/bonnet hinge??
Nice work 👏

Villiers de Vos Автор
Thank you Jennifer and Mr D.
Mr D, it is a real hinge supplied with the model. See photo 36.

Mr D
Great...it looks the part 👍

Alexander Romanov
ahh - cool

Konstantin Zhiltsov
I love the egg carton idea! Absolutely ingeniously!

Great work on the model too.

Villiers de Vos Автор
Gentlemen, thank you for your kind comments.
I hope to stick a fork in this project by the end of this weekend.

CaptGPF
Amazing step by step process! I love your technique for painting / reducing the fine detailed caps - absolutely brilliant!

Nick Dragone
You did a fantastic job on this old Revell kit. I built one as well which is on my wall. This kit aged very nicely. Good work

Matti Thomaes
Nice result, love the color tones

Rui S Автор
I've some Miniart dios in stash, so I decided to do something diferent for me.

Villiers de Vos
I am booking my seat in the front row and will be following your progress.

René (Lord Bilbo) Bartholemy
Same here. Front seat.

Rui S Автор
Thank you for your vote of confidence and encouragement mates.
I Apreciate it and i hope I will not disappoint you.

Michael Osadciw
Me too. I have two of these MiniArt building kits in the stash for two different dios. I'm looking forward to your progress.

Mike Kryza
Hi Rui, I'm in!

Bruce Huxtable
Hi Rui, if you were to press this wall face down into something like Plasticine, and then pour the plaster onto the Plasticine, that might give you a crisper copy. Good luck with your experiments - I'm watching with interest (as these kits are not cheap....) 🙂

Rui S Автор
Thank you for your vote of confidence and encouragement. I'm very pleased to have you on board mates. Now I'm feeling the pressure growing 🙂
@ Bruce, Thank you for your tip. Yes, It seems quite easier to do it Plasticine. I don't have any at the moment but...🤔
I also decided to duplicate the plastic windows in wood. So I've always other alternate molds up to scale.
I will try to make some scaled bricks in modeling paste, and other stuff to improve the overall detail.
I'm hoping to enjoy the work on this little scene.
Let's see how it's going to workout 😎

René (Lord Bilbo) Bartholemy
Hi guys, pouring plaster in plasticine will soften the plasticine considerably (tried it), leaving you with a very difficult to clean plaster positive. I talked already of the Silicone & Cornstarch technique in another post. Here's a link to a YT clip: Youtube Video (as ever, the music sucks!) to show how easy this solution can be.
Hope to be of service... 😉

Rui S Автор
Thank you for your heads up and video, René.
It sure makes things easier to understand.

gorby
Interesting. No doubt this will be transformed into something special.

Bruce Huxtable
Great tip, René. Looks easy so will give that a try myself too ?

Rui S Автор
@ gorbygould, Thank you Mate. Apreciated.
I'm Hopping to do something about it, but I don't know how special it wil be 😄 😄 😄

Kerry COX
The masters machinations. !
Make room for me on your brick fence there Rui. ! 🙂 👍

Rui S Автор
You know I'm always proud to get a master on board. So you know you are always most welcome, Kezza. The pressure is on, hehehe

Rui S Автор
Here is the reason why i will never be able to make a weekend model, at least with these old kits 😉

gorby
Good grief, that little bike model has more parts than some aircraft kits I've done.
It's looking good so far and I'm interested to see how this develops.

Bruce Huxtable
Watching and learning 🙂

Rui S Автор
Thank you for your kind words mates, apreciated.
@Gorby, this is an old kit and could be more detailed. I hope you will like what I'm planing 😉
@Bruce, you're welcome. I hope it can help in someway, because you have more experience than me in Miniart dio kits 😉

Bruce Huxtable
I have a few motorcycles and bicycles in my stash, that I have put off attempting, as they have PE and tiny parts. Your added extras are encouraging me to make a start (when I am next in UK, and can get near my stash!)

Rui S Автор
This one, unfortunatly dosen't have PE spokes on the weels 🙁
Looking forward to see your next builds.

Bruce Huxtable
Me too, Rui! I have been away for eight weeks, and don't yet know when I will be home again. I'm suffering withdrawal symptoms....

Rui S Автор
😄

Villiers de Vos
Rui, a beautiful build and impressive attention to detail.

Rui S Автор
Thank you for stoping by Villiers de Vos, I apreciate your comment 👍
I've finished the build and starting the paint work on the bike. More photos to follow 😉

Jean-Michel Tilquin
Nice work as ever so far Rui. Waiting for more!

Rui S Автор
Well come abord and thank you for your comment Jean-Michel Tilquin.
"Your order is my command" 😉 🤔 😄

Kerry COX
Simply outstanding Rui. 👍 👍 👍
I am wondering about the crease in the drivers and pillions saddles, if that was hollow or left as you have it there. ?

Rui S Автор
Hi, Kezza. Nice of you to stop by and leave your kind and wise words. Always very much apreciated.
If I get you right, you are speaking about the holes in the seats?
That completely scaped my attention. I have to study that issue... Thx again

Simon Nagorsnik
It will be getting a nice dio, i think!
Good detailed bike- good job on an old kit👍

Kerry COX
Rui. I just did a Google search for BMW seats for WWII army type M/Cycles. And it looks like you have it right. The seat has no slots or open cavities. 😉

Rui S Автор
@Simon, thx a lot for commenting with encouraging words. I appreciate it.
@ Kezza It looks YOU are right Mate. I've looked at my research material and it seems they are mostly flat. I've seen one or two that have a slight depression on the front seat, but nothing so deep like in the kit.
Now I will have to further detail the seats 😄

Rui S Автор
Kezza, I've Uploaded two photos 😎 second bike on the Left in the first photo.
In the second the front seat, apear to have 3 recess 😎

Kerry COX
Good spotting Rui. I wasn't being a smart ass. I genuinely wondered if they had the hole there for letting water drain away rather than pool, or cause a wet bum if you were not paying attention before you threw your leg over in a bit of a hurry to get away. (Just a thought mate. 😉)

Rui S Автор
Of course you weren't Mate, you never where a smart ass, I'm sure you don't intend to start now 😄 More so, because what you say makes total sense. We motorcyclistes know how bad it is when water arrives to your Balls 😄 but normaly this guys use rubber suites on the winter.
I thank your insight and headsup. I've decided to change only the back seat and i've done it already 😉

Kerry COX
LOL. 🙂 I was only trying to be logical Rui. 😉
I am really looking forward to the progress images, as the final result will look so real, it will have us all opening our doors to let the engine fumes out. !!!! 👍 hehehehehe

Rui S Автор
😄 Me too Mate 😄
Thanks for your encouraging words. I hope I don't disappoint your expectations.

Villiers de Vos
Very nice Rui, especially all the small details that you have added.

Rui S Автор
Thank you for your suporting words Villiers de Vos. Apreciated.
I didn't go the extra mile, but there is always space to further detailling 😉

Villiers de Vos
Rui, very nicely done.

Bruce Huxtable
Liking the realism all the extra wiring, etc brings 👍 Is that an ignition key too ?!!

Jim Bob McCabe
That motorbike combo looks great, Rui; i hope you don't mind but i am going to copy your ideas as i have one of those combos waiting to be built and detailed.

Rui S Автор
Thank you mates, for stopping by and comment this album. A good motivation.
@ Villiers, Glad you are following, and like it, so far 😉
@ Bruce, when you pick an old kit you know you will have extra work to do, but I'm not going the extra mile because this is tiny (for me ofcourse). That piece it is not the key. I think, it is for tighten / loosen / lock ? the steering shaft? 🤔
@ Jim, Welcome abord, Be my guest. I'm flatered, you are more than welcome 😄

James C
I'm not much of a fan of motorcycles in general, but your detailing and attention to detail with this build is fantastic 👍

Kerry COX
What ever the season you choose Rui. I am sure you will do it justice my friend. 👍 👍 👍 🙂

Simon Nagorsnik
a good job with the bike!
I also think that it still needs some dust and also on the floor of the sidecar

Teeage
Nice job, again, Rui 💪🏼

Olivier
The R75 was produced between 1941 and 1944.

Rui S Автор
Thank you for your comments mates.
@James, In the past I've done a Tamiya ketenkraft, 9 SS Panzerdivision | Album by mig (1:35)
and I always look at it and think, "why didn't you made the cables??? 🙁" So this time I was more comitted.
@ Kezza, well this time I'm going for a dry season 😉 apreciate your encourgement

Rui S Автор
@ Simon, thank you for stopping by and comment. I'm going to try a soft urban dust weathering
@ Tini, I'm really glad you also like this litle thing.thanks a lot
@Olivier, Thanks a lot for your headsup. Apreciated mate.
I was so engrossed in building the bike that I didn't even go to see its production story. I already had a Dio in mind and now I have to change all the plans. I saw so many images of motorcycles invading Poland in 1939, that I was going for that. As you can see, I'm already thinking about the alternative, same context, same unit, but later in the war, 21/11/1941 – 27/11/1941.

Olivier
Sounds good to me.

Rui S Автор
Thanks Olivier I'm glad you concor 😉.
I'm going to extend the time frame a little from 04/10/1941 – 27/11/1941, so there are no more inconsistencies 😄

Bobby Thumbs
The bike is awesome rui

Rui S Автор
Thank you very much Bobby, I realy like it very much too and I'm not trying to be cocky. What I mean, is that I'm very happy with the result so far 🙂

Kerry COX
When your work is constantly of such high quality Rui. You can afford to be cocky mate. 👍 👍 👍 😉

Rui S Автор
Hi Kezza, I know to well my limitations, so I prefer to be humble, (and believe me that's not false modesty) even more so, when I see the top modeling level here in scalemates. 🙂

Daniel Klink
Truly a fantastic result mate👏👏👏👏👍

Rui S Автор
Well Daniel, Thank you so much for your kind comment Mate. It means a lot to me, comming from a top modeler like you.

Kerry COX
Well said my friend. 👍 😉

Rui S Автор
Thx Mate. Glad you agree Kezza 👍

Artur Z.
Hi Rui, it's looks like next exellent work 🙂. I will wait for final result.

Rui S Автор
Thank you, for your vote of cofidence, Artur. Apreciated.
After aborting the 1939 Poland dio project, I've to redirect the all thing. But I've a plan B in mind.

Mathias Decommere
Nice motorcycle-paintjob!

Villiers de Vos
Rui, this is pure eye candy.

Rui S Автор
Thank you Mathias and Villiers de Vos, I'm very glad you like this one. A long way too go, but I'm very proud it took your attention.

Jac Fleming
I love the pose of the bike, I wouldn't change anything. The road and building are super objects by their simplicity

Rui S Автор
Thank you Jack. Nice of you to stop by and coment this one, Apreciated.
I see what you mean but I want to make an efort to do this dio more real, like I always try, and so y see that I still have lot's of work to do. 😉
P.S. Owh, and the Rommel unfinished figure, is just a touch for scale purpose.

Rui S Автор
Some update photos, of the third kit for the dio.
My first Alan/Dragon Kit (definitely not for beginners).
Scratch on Zis truck, started 🙂

gorby
That does look like a very challenging kit. Fortunately your skills can easily master it.

Rui S Автор
Thank you for your kind words Mate.
Well, the kit is bad enough yep, but I'm challenging my scratch build with it, so I'm hoping to make something interesting out of it with spares and trash that I've accumulated in the man cave 😉

Rui S Автор
This is the state that the transformation from Zis 5 (Zavod imeni Stalina 5) to PMZ-1 (Zis-11) special chassis developed for the fire departmant, is currently in.

It's a Autopump on a Amo-4 (Awtomobilnoje Moskowskoje Obschtschestvo-4) chassis, from Miusskaya fire engines plant almost in the center of Moscow.

PMZ-1 also (ПМЗ-1) or (ЗИС-11) is the first model of this plant, realeased in 1934. This fire truck had a engine power of 55kW, a load capacity of 3 tons, was designed for 12 people, equiped with a centrifugal pump that suplied 1340l/min, and a tank for 360 liters of water to extinguish fire.

Villiers de Vos
Simply, outstanding work Rui.

Rui S Автор
Thank you very much for stopping by and comment, Villiers de Vos. You are to kind Mate. But yeah, I'm enjoying it a lot.

miloss
Very nice and detailed build, thank you for very helpful photos and comments. Can you suggest me, please, some good source to learn how (from which point to where) to draw cables in German BMW and Zundapp bikes, please? Your pictures are detailed, but sometimes I´m not sure, which cable is it, in other picture.
Thank you very much.

Rui S Автор
Thank you miloss for your words.
Well, my album is certainly not the best place to understand how to put wires and cables in the BMW.
I did my wiring by looking at a lot of images of this motorcycle available on the internet and also some knowledge acquired since I was little because I have always ridden motorcycles.
I'm not an expert or rivet counter but I can say that there are always n cables, some electrical and others steel, that connect, for example, the levers to the brake hub on the front wheel and to the clutch. then there's the accelerator that goes to the carbs, there's also the speedometer cable that goes from the front wheel to the dial.
Then do we have electrical cables that go for example from the spark plugs on the pistons to the alternator? and all the lighting cables coming out of the battery, to the front and rear lights, etc.
So if you want to get it perfect what I can advise is a lot of research on the net maybee try to find the diagrams of the complex electric systems and also on YouTube, there are lots of this bikes with lot's of fan's still nowadays, so you will find What you're looking for. I hope this helps, a bit 😉

miloss
Hi Rui,
thank you very much for your answer. I´d like to accentuate, that your amount of pictures, done during building of models is not usual in positive meaning of words, and so I´m really grateful for it. My intention was not to diminish your effort, only to point to my lack of knowledge and ability to fully use them for my own education. And yes, my question is a part of my searching on internet for good source of information. Different of you , although I´m not a young boy already, I´ve never ridden a motorbike. Actually I started to like motorbikes (old veterans I mean) only since my , let´s say, upper age. 😮 🙂 So I have to learn a lot. I love books, but they can be expensive and to buy something and then realize it was not worth money is not optimal way of learning ... but it´s also learning, isn´t it? 🙂
Thank you very much, have a nice day!

Rui S Автор
Hi miloss,
Thx again. I didn't understand your comment as derogatory, quite the opposite.
I appreciate the same and apologize if my answer or English words chosen were or sound arrogant, as that was clearly not my intention so i'm hoping no harm done.
I understand What you mean and I'm sending you a private message so I can try to help a little more and talk about the matter at hand 😉

miloss
Hi Rui,
thank you very much! No harm was dome, don´t worry! I´m also not very clever speaker in English, it´s much better in Slovak, I think. 🙂 The way of thinking and speaking in my language is different comparing to English - there are some cultural differences, what´s OK, but can cause difference in what wanted to be told and what was told. 🙂Thatś why I´m not always sure, how my questions sounds to other people. And I don´t want to be rude (without reason). 🙂
Thakk you very much for your PM.
Keep well!
Miloš

Rui S Автор
Hi miloss,
Ok, nice, for me would be better in Portuguese 😄 otherwise misunderstanding can always happen, and hey, you're younger than me 😉
Cheers.

gorby
If the main language of Scalemates was Portuguese, Slovak etc. I wouldn't have a clue what was going on. Everyone on here who speaks English as a second language deserves respect from those of us who use it as our native tongue. In fact, it's often embarrassing when many of you write English far better than many of the English.
Rui: your scratch building on the truck is excellent. I love the way you made the back fenders/mudguards.

miloss
Hi guys,
yes,you are right. You know, I´m greenhorn.🙂🙂🙂
Cheers!

miloss
Hi gorby,
let me ask you, please:I see that you started Panzer Soldiers Set 1. Are you able to remove molding lines of miniatures and do not destroy all details around, please? Because I´m not. So I would really appreciate some advice, how to do it. I tried thin cement, to freeze it and use low temperature, to use acetone, and, of course, sand paper, scalpel and razor blade. Razor blade works, but it´s too big to use it in area around delicate details.
Thank you very much.
Cheers!

Rui S Автор
@ gorby, thank you for your words and understanding. One thing I'm sure, my English is rough and I wish I had your sense of humor, or at least be able to transmite mine in English as perfect as you do with your 's in all your álbums, like the introduction words of your panther 1/48 project.
Let me introduce you to my first and ONLY attempt to model a tank with a full interior. | Album by gorby (1:48)
Outstanding. I always laugh and enjoy reading your comments.
As to the fenders I think we both have that improvisation in common, right? So Thx again.

@ Miloss, I think you should ask gorby about his project's on his albums. Please don't get me wrong. I don't mind you doing it here, but I thing it's fare enough if you you do it in Gorby albums, they surely deserve it.
Btw I never was able to remove 1/72 figures seam lines
So thank you both.

gorby
Hi Miloss, the Panzer soldiers set is my first experience of Orion figures and I was quite impressed with them, they are the best 1/72 figures I've tried. Mine only had a faint seam line on most of them although there was a few which needed trimming. I found a sharp scalpel used with a sawing action worked well enough and then, if that left a rough patch I used Tamiya Extra Thin. Do you know that you should prime the figures before painting with diluted PVA glue? I used plastic primer on top of that as well. I hope that helps.
Thanks you for your kind words Rui. It's particularly pleasing as I had to re-learn to speak and write after a stroke 18 years ago.
Isn't Scalemates a lovely place? 🙂

miloss
Hi guis, thank you very much for your answers and sorry for my question placed on not correct place. I'm really not a fan of social medias and my knoleadge of the manners there are really poor. I felt the post similar to Room of discussing people and I wanted to use opportunity to ask someone who is present there.But you are right, no doubts, and I know how to do it correctly, next time. 😁🤔👍 Thanks.
Cheers!

P S.: I tried Extra Thin glue and scalpel, but with poor success. But I didn't know anything about diluted PVA. Thanks!

Rui S Автор
@Gorby, I'm sorry to know about your misfortune but very Glad that you recover very well from that stroke Mate.
I'm 100% with you, scalemates it's a lovely place 👍
So Keep safe.
@Miloss, I'm sure, no harm done. 🙂
Cheers

Neil Patrick
Great craftsmanship Rui. Two major projects in one build! The Zundapp looks wonderful and I am sure the ZIS will too very soon. Looking forward to seeing the next steps.

Rui S Автор
@Neil thank you very much for your kind words and for stopping by and comment. Yah I'm back from holidays and I've to restart working on this project. It will be a long one as all my other work but hopefully I will manage to do something that will make me proud.
P.s. it's a BMW 😉

Thank you Tom Harris (MHBeergeek) for the 53 like. Much Apreciated

Neil Patrick
You're welcome Rui. Duh, How did I make that mistake? I think I was probably just too distracted by the fine detailing! 🙂

Rui S Автор
Thank you very much Neil.
No harm done 😄 on the contrary.

Thank you tom svk-atfor the 54 like. Much Apreciated

Rui S Автор
Thank you Jac Fleming for another 54 like on this album. And Hang Li fot the 55...or should I say the 56 🤔
Much Apreciated

Simon Nagorsnik
Fantastic scratch build elements!
Really like them, they´re looking great 👍
I'm already curious how it will look finished.

Pietro De Angelis
Remarkable work,
congratulations for the detail work on the vehicles.

John
Is that a water pump in the back of the ZiS? Amazing level of detail and scratchbuilding Rui!

Villiers de Vos
Over the top scratch building skills.

James C
Coming along nicely Rui 👍

Kerry COX
Will this give us frost bite Rui. ? 😉
I can imagine all kinds of scenarios and blood in the snow is one of them, if a field ambulance is required. 👍
What are you using for the bolts that will be holding all your timber add on's. ?
Brass pin nails like the naval modellers use for their planking are good. :-/
Love your work mate. 'No covid blues here' obviously. 🙂 👍
Cheerz .😉

Rui S Автор
@Simon, thank you for your comment and vote of confidence. I'm also very curious how it will end 😉
@Pietro, thank you for stopping by and your kind words. Appreciated.
@John, thank you very much, I can say that you nailed it.
@Villiers, you are to kind Mate. Thank you.
@James thx Mate .I'm really glad you like it.
@Kezza, my friend, thank you for stopping by and comment. I'm really glad to hear from you Mate. Hope everything is good now.
Well, I'm trying to keep some secret about this one, but I can say that, yes it will have blood (but not on the snow), and that John as raised the tip of the veil 😉 😄
You know I'm not a rivet counter, so I think this will not need any visible bolts.

I also would like to thank all the 60 mates that pressed the like in this one and also on my other albums. Appreciated

Kerry COX
Sweet as mate. !! 🙂 (y_

Rui S Автор
Start working again on this project, and the mojo comeback 🙂
Also thanks for the new likes. (thx to all 63 mates).

Villiers de Vos
Rui, it simply stated work of the highest standard. I am glad you have your mojo back.
What is the kind of tape that you used to make the hoses please?

Rui S Автор
Hi Villiers, thank you for your kind words Mate. I've used it before in my project
Outono / Autumn 1944 | Album by mig (1:35)
To simulate zimmerit.
It is used by wall painters when they have to mask out circled areas. it allows you to extend (straighten) one side while keeping the other side short and rough.
And yes, I'm such a slow modeler that I also really enjoy when I'm motivated.

@ ribellinu, Thank you for the 64 like. Appreciated

Villiers de Vos
Thanks Rui. I agree with your feelings.

Rui S Автор
Starting the bodywork, paintjob. Complitely noob on shiny paint work... The only gloss kit I have is a 1/72 Kubelwagen from centurys ago when I only had some clossy paints and brushes.
Some dry fiting test also.
Getting ready for the marriage.
@ Villiers de Vos 👍
@ DaveTheGun, Thank you for the 65 like. Appreciated

Kyle DeHart
Very cool!

Rui S Автор
Thank you Kyle, I'm glad you like it and comment. Apreciated
Also, thank you and to David (DaveTheGun), and Robert Hessler (RobCol)
for the 3 new likes, 68.

Kyle DeHart
I do like it. Most impressive!!

Mathias Decommere
Your building proces is really mind blowing... Perfection in the smallest detail.

Villiers de Vos
Phenomenal.

Rui S Автор
@ Kyle thx again, you are to kind.
@ Mathias, thank you very much for your kind comment. Don't we all seek that impossible aim 😄. ? Much appreciated comment.
@ Villiers de Vos, thx for your support & motivating comments Mate, you are so kind.

And thank, Viacheslav (touristTula) & Dmitry Melnikov (Ditrich) for the 2 new likes, 70.

Riho Sakrits
Will be watching that project!
Boa Sorte!

James C
Looks to be progressing nicely Rui 👍

Rui S Автор
@ Riho, Thank you for your interest and comment. I hope you will find this interesting till the end. Obrigado 😄
@ James, Thank you for your comment. Apreciated. My redemption from ZIS - 11 or PMZ - 1, is nearing completion.
And thank you Dmitry Melnikov (Ditrich); Raditz; Neil (djferrisbueller) and Mark K (Ladislas) for the new Likes. (74).
I've uploaded some more scratch detail work on the kit. I Hope you find it interesting, I sure enjoyed doing it a lot.

Villiers de Vos
Very nice work so far. It is a joy studying the small details in each photograph.

Kerry COX
As always. It's a trip back in time and a great rendition of that moment in time. Then, there is the detail. Thanks for the pleasure you give us all when admiring your skills.
None better. 👍 🙂

Rui S Автор
@ Villiers de Vos, thank you for your kind comment and continuous suport, very apreciated. I'm really glad you like the detailing.

@ Kezza, thank you my friend. you are without a doubt one of my main mentors here. It was with you and through your albums that I learned a lot, and I even tried to use your sharing methods in my Albums. It is fair and deserves my respect and public recognition for what I am saying. I am far from reaching your heels but your support from the beginning was one of the reasons that led me to try to do more and better. so thanks for your support. for me it means a lot and I am always proud of your comments. Thank you for your unconditional friendship, without it I would not be what I am in scalemates.
P.S. if I'm something at all. One thing I'm sure, I'm for ever grateful to you.

Rui S Автор
Now lifting one more edge of the veil, reveling a little more about this project, I leave you with Sturmbannführer Kurt Meyer (nicknamed "Steel Fist") , commander of the motorized reconnaissance battalion "SS Leibstandarte" memories, about that noon on Wednesday, October 8, 1941:

(...)- My armored car drove into a round city square. Trams were moving in our direction, and trucks, horse-drawn carts and hundreds of people were spinning around. My armored car almost ran into a fire truck, the driver of which stopped in confusion. The second armored vehicle, which was following mine, suddenly opened up with a whole hail of fragmentation shells, and the fire truck, frozen in front of me, was literally torn in half!
Next, the machine guns of our motorcyclists rumbled, echoing with an eerie echo somewhere in the courtyards of the houses surrounding us. (...)

Robert Podkoński
Your skills and perseverance are simply impressive, Rui. Keep it up!

Rui S Автор
Thank you very much for your comment and encouragement Robert, much appreciated.
The clean and shiny version (Diecast type with a little accident) of the fire truck is almost finished.
I just need to take more photos.

Rui S Автор
Now I can start to concentrate on the dio and figures.

Kerry COX
As always. Your skills and attention to the details have shon through mate. Well planned and executed. 👍 👍 🙂
What will next year bring I wonder. ? hehehe
More surprises no doubt. 😉
Happy New Years too mate.

Rui S Автор
Hi Kezza, thanks for your nice comment. Apreciated.
You Know mate, I realy fell proud doing this original, never saw one built, so... 😉
Anyway, at the start of the new year I want to finish this dio, so let's see how long it will take 😄
Best wishes to you and a Great and Healthy New Year 👍

Villiers de Vos
Rui, outstanding and inspiring. Best wishes for 2023.

Kyle DeHart
Really great Rui!

gorby
WOW! The fire truck is fantastic Rui! Up there with the best modelling I've seen on Scalemates.

Mathias Decommere
Just... Superb!

Rui S Автор
@ Villiers, thank you very much for your comment and kind support. Happy 2023, Mate.
@ Kyle, thank you for your comment, glad you like it.
@Gorby, thx a lot for stoping by and comment. You are to kind mate. I know very well your scratch skills and originals, and I also know I'm still some miles away from the best modelling here, but always learning on each project and so, improving.
@ Mathias, thank you very much for your kind comment. Apreciated, and it means a lot.

Thank you also for the new likes and to all, Happy 2023.

Rui S Автор
Frankenstein at work. This was easy the poor guy was already dead. Last figure worked out.

John
Nice work Dr. Frankenstein! Very realistic pose of an unfortunate participant.

Rui S Автор
Thx a lot John. Apreciated.
Yap, obviously some work still to be done, but I'm also quite happy with the pose.

Rui S Автор
Started the new challenge. Making a good interesting scratched base.
For those interested in this historic events or If someone wants to know more about this episode, you can translate from this interesting UKRAINE site:

dniprovsky-project.b..om/2021/07/1941.html

It also has a video, but unfortunately without subtitle's.

Villiers de Vos
I am still nailed to my chair. Following each development, big and small with great interest.

Rui S Автор
Thank you very much Villiers de Vos, I realy apreciate your resiliance 😄 and the endeless suport. Thx a lot.
I've finished the scratched Tram Pole, it's ready for painting 😉
Another small detail but one less to do in all the scratch work I've been doing in this project.
They sure take double time, old fashion work, from finding the right pieces and work them to a viable result, at least for my hapiness.

Rui S Автор
Start the work on the dio base.
I also want to thank all the new likes on this album. Apreciated.

Alec K
Amazing build 👍

James C
That cobble stone road looks fantastic! The manhole cover and tram lines are a nice touch as well 👍

Robert Podkoński
Soo realistic... You're a wizard, Rui!

gorby
The base is stunning! Remarkable.

John
Incredible base Rui! 👍

Mathias Decommere
Just perfect!

Rui S Автор
Well mates, I love this hobby yes, but with the kind words of support from such talented friends, I enjoy it even more.
Thank you all, I really fell great with such comments, they help me endure any hardship I encouter. Let's see if I can keep up with the standards.
Thank you also for the new likes.

Pietro De Angelis
Besutiful base!

Kerry COX
Rui. I do hope that all those cobble stones came in a packet mate. But knowing how enthusiastic and fussy you are about your work. I wouldn't be at all surprised if you hand picked them from some construction site. 🙂 🙂 But as always. Your the best. 👍 👍 😉

Neil Patrick
Just catching up with your amazing project Rui. Quite apart from the fantastic modelling, it was great to see the photos from this event all in one place. I think most of us have seen some of them before, but the books I have seen them in do not give much context or info about the actual events they depict.. Your extra research makes the whole project historically fascinating too. Great work!

Tierra del Fuego Alejandro
1. in my little opinion, as a rule, there is always a puddle from the inner thread of the rail of the tramway, or it dries up or has just formed 2. too clean street too clean path. although I myself love cleanliness, it's hard to achieve cleanliness on the street for a number of reasons independent of each other

Rui S Автор
Some progress done, I've start painting figures and weathering the tram pole, truck, and a bit more on the bike.
@ Pietro, Thank you, glad you like the base. Still work to be done but I'm happy the way its going,
@Kezza, Thx Mate. The cobble stones had already appeared in this album (photo 18). They came from a beach in Algarve.
@Neil, Thx mate. Yap this events are very well documented, as i discovered with the progress in my research.
I also would like to thank Austin Steenkamp; Lothar29 and all the new mates that pressed the like botton. Apreciated.
Still a lot of work to finish the dio, but I've now a glyinps of the final result.

Pepe
😲😍

Mathias Decommere
It sure will be a beauty!

Robert Podkoński
Faces are just perfect, Rui (as everything else 😉 )

Guy Rump
Looking better and better. 👍

Shar Dipree
Great work and a phantastic overall impression. 👍 👍 👍

Villiers de Vos
The motorbike and crew is a beautiful little gem. The wear and tear on the backrest of the sidecar is a nice touch.

Olivier
I fully agree with Villiers. Your motorcycle crew look almost real.

Pietro De Angelis
Amazing crew and motorbike Rui!
I'm so sorry, from the bottom of my miserable modeling and cultural historical skills I would never allow myself to give advice but if the scene is set in Mariupol during the Battle of the Sea of ​​Azov in 1941 the BMW R75 if I'm not mistaken was not yet available for the German Army, the model available at the time was the R12.
Anyway great work, congrats!

James C
Those figures look fantastic. Awesome job on the paintwork! 👍

Rui S Автор
@Pepe, thx
@Mathias, thank you for your support, I hope you are right.
@Robert, thanks for your kind comment. I was nicely surprised on how fast they got into this result. I think they are well sculpt and has they say, when you have that one's "they paint themselves easily"?
@Guy, I'm glad you think so. Thank you for that
@Shar, welcome and thank you for your comment and like. I'm also hoping in the end, to have that nice overall impression to be satisfied with all the effort applied on it.
@Villiers de Vos, what to say to your always motivating comments, thx a lot? I'm glad you noticed that soft weathering too. Apreciated
@Pietro, thank you. I'm pleased you like the R75 and crew. Has to the historical accuracy I will respond next.
@James, your comment is always very apreciated. I know and recognize the high quality of your work, so it's most rewarding to see you stopping by. Thx

Rui S Автор
Now Pietro, you probably right, that it should be a R12, but has you can see the matter was already discussed up in this album with Oliver early in 23 November 2021.
When I started the BMW I only had the idea of making something different from what I had been doing, than I thought about Poland invasion but that was a blunder has Oliver pointed out. So I changed plans and look for a date when the BMW was already running. And 1941 was the beginning of that.
In BMW Group Archive, I found that:

In 1941 the production of civilian motorcycles was stopped. Germany was at war and production was adjusted to the needs of the Wehrmacht. BMW motorcycles have always been popular with authorities - and thus also with the military. Single-cylinder models were used as light courier and training machines, and the R 12 was delivered to the Wehrmacht as a side car.
However, the war policy of the Germans required a motorcycle Side car that could be safely mastered on any surface - mud, ice, gravel, desert sand - and that required only little maintenance even at extreme temperatures and heavy loads. In addition, the motorcycle should also be able to cope with longer distances at low marching speeds without any problems.
No German motorcycle manufacturer had such a machine in their range, which is why a special development order was placed with BMW and Zündapp. In the winter of 1938, BMW began work on this project based on the R 71 engine. The beams of the bolted tubular frame were divided. This enabled the engine to be installed and removed quickly, as the lower frame part could simply be folded away. A rear wheel suspension was omitted for better stability. But while the frame proved itself during the test drives, there were thermal problems with the side-controlled motor in off-road use and on longer trips at walking speed. So BMW developed a new engine.
The result was a 750 cc unit with an output of 26 hp at 4000 rpm. The engine developed an enormous torque and, since it had a very low compression ratio of 5.8:1, it could also easily tolerate poor-quality or synthetically produced fuel. In contrast to the R 71 engine, no heat problems occurred during testing, so that the R 75 could go into series production in 1941.

And

Series production of the R 75 begins
date from07.1941.
Description
In July 1941, the first R 75 sidecars rolled off the assembly line in Munich. However, after production was relocated from Munich to Eisenach in June/July 1942, the majority of the R 75 was manufactured in Thuringia. The R 75, with seven forward and two reverse gears and a powered sidecar, was specially developed and produced for the German Wehrmacht.

Rui S Автор
So my conscience his ok with using this kit has eventually a single replacement new side car in October, for the first SS division formed based on the Hitler personal bodyguard regiment ( probably with a great influence) in theory it could be possible?. Has said already above in this album I'm not a rivet counter (I can't read the licence plate in one of the reference photos, the one that looks like a Zundapp?...just joking 😉) and my dioramas don't intend to be historically correct they simply aim to be ideas historically based, with lots of the so called "artistic" liberty.
Anyways Thx again for your comments. I apreciate them all.

Pietro De Angelis
👍

Alec K
Awesome progress Rui, I love the expressions on those motorcyclists' faces 👍

Gary Curling
Motorbkes and bikes are fiddly models to do,so well done on this one

Kerry COX
Hi Rui. 🙂 🙂 🙂 I have just finished browsing through you work using the mosaic view and pulling up the ones I saw that showed the detail you included.
It took a LONG time to do as every image had something of interest and wonderment included.
No need to say your attention to detail is superb, as I have said it every time I see your work, especially with the images of the original scenes in black and white you have used to help you define that moment in time.
It takes a while before the smile on my face goes after seeing what you have accomplished.
It really is hard to separate the final results from the images you used as reference material.
That is some skill you have my friend and there is not one build I have seen of yours that one can find any sub standard workmanship.
Your skills and abilities are truly something special mate.
Thank you for all the years of enjoyment and inspiration. 👍
Cheers good buddy. 🙂 👍

Rui S Автор
@Alec k, thank you, glad you think so and like them and yes this figures are well sculpted.
@Gary, thank you for stopping by and comment. Apreciated. Not the best motorcycle kit in the market I think but it was a nice kit to build and improve. Thank you for your like too.
@Kezza, my friend, your words put a big smile on my face. Thx a lot Mate, coming from a Master makes me feel very proud. Also Knowing that my work was interesting enough for you to have all that work and time spent looking at it ... Yap makes me feel Great and motivated for doing better every time.
I know I should be more selective in chosing the lot of photos I upload but as I've a lot of work in improving the old models I find difficult not to share that in here, so I end up uploading more than I should, but hey, that's just one of my disabilities.
I really enjoyed reading your comment. Thx again good Yoda 😉

Kerry COX
Hi Rui. 👍 I am pleased to know you 'rescue' some of your builds. 🙂 I have from time to time pulled a few off death row and repatriated them to their former glory. Just as much fun as unpacking them for the first time. 🙂 Right now, I am eying off the Erickson Sky Crane from ICM in 1/35 scale. But I want to do it as the 'Elvis' fire fighter. Bright orange with a huge tank slung under the rotor and engine assy. Almost $300.00 AU. But with the war in Ukraine, it's understandable. Also. I am eagerly awaiting the 1/35 Mi-28 'Havoc' Russian attack helicopter from Meng. The 1/72 scale was a shit model. Happy Easter my friend. BTW. I meant every word about your skills and abilities. You have given me so many ideas and tips without saying a word. 😉

FTilhonLinden
Excellent work! My deepest respect!

Rui S Автор
Hi Kezza, I think I didn't express my self correctly as sometimes occour. I meant old kits and not, my old models. That ones I never go back and touch them, not because i don't fell that urge, it's more because they tell the story of my skills at the moment I built them and so I like to see what progress I'm geting from newer experiences. So I let them stay like they where when I finish them. Also, I've so many kits in stash that I prefer to start a new project from scratch. If not I always consider that a model his never completelly finished, so it would be a never ending process arround the same subject, plus you know I'm a very slow modeler. I always have to enjoy one less on the stash.
Anyway, I'm looking forward to see you Back in Action Mate, I missed that for a long time now, so I'm eager to study your new albums. Please, go for it, you know my scale is 1/35; 1/32 right👍
Happy Easter to you too, my friend and thx again for your kind words, they are always most welcome. I'm really happy to know that my work still has some tips for the interested mates, that makes me try harder to work better, (and ofcourse some abuse in uploading it) 😄.
@ FTilhonLinden, Thank you very much for your kind comment. Much apreciated and I'm really glad you like my work here.

Kerry COX
I did misunderstand, but 'no foul' as they say. hehehehe I am looking around for a display case that will take all my 1/32 scale birds and choppers, those being the 'Super Stallion, the Apache, and four Ju-87's and Skyraider, but with the two future additions, I will be pushing for space to put the case too. :-/ Not long now before I have the confidence to tackle an other big project. It's been a while. 😉

Mark Sherwood
That is a very nice BMW Combination, kudos on your figure painting. The dio' looks pretty nifty too.

Mr James
I know its been mentioned by others, but your attention to detail and the documentation of your process, is very impressive Rui. It inspires me to build the R12 in my stash to your standard. I will be referencing your work when the time comes and for that I thank you. I was really impressed by the painting of the bike riders. They wonderfully painted and the expression on their faces you brought out, is superb. The scratch building of the fire truck is a stand out and the cobbled street is beautifully painted. Bloody good work Rui 🙂

Villiers de Vos
As always, phenomenal detail. Master class.

Neuling
Mr James says it all. - To me picture 313 seems to show the completed diorama. More photos would be more than welcome!

Kerry COX
Rui. Your simply, the best. ! Salute. 😉

Kyle DeHart
This has been great following along with. A really stunning result. The attention to detail has been next level across the board.

Jean-Michel Tilquin
It's all been said above... Superbly detailed and the figures are really realistic.
Like Neuling, suggested, more photos with a cleaner background would make your dio more justice! Congrats, Rui!

Lawrence Landis
Your work is phenomenal. Very enlightening.

Kyrylo
This is a very titanic work ... I am delighted with the realization of this idea! You are an incredible cool modelist because this work is truly difficult. I am pleased that you have chosen the subject of Mariupol because it is the city of my student years. Thank you for it! I will look forward to new works!

Walton
Hi guy !! I'm very impressed by your face painting.. It looks sooo human !!!!! 👍👍👍

Villiers de Vos
All the elements are starting to come together. Fantastic.

Mike Kryza
I like the result! Well done!

Rui S Автор
As mentioned some time ago, I would like to respond and thank all the last comments that have been posted here, now that I've resumed this project and hadding it to completion.
I intend to emphasize the great appreciation I have for all of them and so, responding to everyone:

@Kerry COX, Kezza my friend, I hope you are well. Thank you very much for your unconditional support, which was one of the reasons why I always continued to work and present my dios here and always try to do my best to reach your level. I look forward to seeing a new project of yours;
@Mark Sherwood, Thanks for stopping by and commenting. I'm so glad you like this dio. The BMW is a really nice kit, although the Italeri always needs some work, but it's worth it IMHO;
@ Mr. James, Thank you very much for your kind and encouraging comment. Appreciated. The details make the difference as they say, so it makes sense to spend time executing them. I highly recommend making a sidecar, as mentioned above, it is a small piece, but in itself it is worth many larger ones. As for the figures, they almost painted themselves, the molds were so good. I'm glad you liked my scratch work too. As for the street, the stones came from a beach in Algarve;
@Villiers de Vos, Thx a lot for your nice comment. Always appreciated;
@Neuling, Thanks for commenting on this work of mine. Photo 313 is just another one of the work in progress. As I love sharing all my work and details here, you already know that my albums have a lot of photos. But yes, I can say that I will be happy to continue presenting more, until the final result, which by the way, is almost arriving;
@Kyle DeHart, Thanks so much for stopping by. I appreciate that you enjoyed the development of this dio. The final result is to be shared soon. I hope you will like it;
@Jean-Michel Tilquin, Thank you, it is a pleasure to read your words here, as I know the quality of your Dios. The photos still represent WIP, but as mentioned above, this work is in its final stages. Stay tuned;
@Lawrence Landis, I'm really glad you like my work so much. Thank you very much for your comment;
@Kyrylo, Thank you. It was really a leap in the dark for me. I always wanted to make a sidecar with every possible detail and the fire truck came along the way and it was really captivating.
Your words are really kind as they reflect all the effort I put into this work. The fact that you are directly involved with this city makes me even happier, as I intend to make this work a tribute, to all the martyrs of the invasions it suffered.
@Walton, Thx for stoping by and comment. Appreciated
@Villiers de Vos, thank you. Yes, as mentioned above this work is in the final stages. New photos are added:

-New fire truck details and weathering, (including battle damage and the flat tire), as well as street weathering.
- Missing the finalization of the figures and the base corner, and the final weathering on the sidecar.

P.S. Hi Mika, I apreciate your comment. Glad you like it. The final result is shortly in sight 😉

Villiers de Vos
Welcome back at your worktable.

Rui S Автор
Thank you Villiers de Vos, but I've been at my wortable finishing two "shelf queens" :
- Outono / Autumn 1944_Jagdpanzer Tiger (P) Elefant;
- Esci sdkfz 10/4.
But yes, now finishing this one and thinking wich one I'm going to pick froms stahsh next 🤔

I´ve finished the base corner.

gorby
The base is looking remarkable! 😮

CaptGPF
A little late to the party, but following! That motorbike looks fantastic!

Steven Van Dyck Автор
The start is quite straightforward with the track suspension, the wheels and the two jigs to assemble the link-and-length parts. The body is then built with only the clearparts as the only intermezzo. I added the main gun with the Aber barrel and closed down the turret, but the secundary weapons will have to be attached from the inside out.

S M
Interesting subject! Following!

Robert Podkoński
Watching too! (I have this kit in my stash, of course)

Guy Rump
Following too! 👍

John Hughes
This one is on my wish list, so I'll pull up a seat.

gorby
This looks interesting. 🙂

Cuajete
Wow... an unusual models and 2 different versions! 👍

Finn
I'm in

Rui S
Me too 👍

Skyhiker
Watching

Guy Rump
Very interesting builds, following. 👍

Robert Podkoński
Taking a seat as well!

Kenneth
Following..

Dave Flitton
Watching!

Juergen Klinglhuber
Checking it out too!

Naram
orginal, I am taking a sit too !

J35J Автор
Thank you for all attention and comments. Welcome to the build!
The Saab B-18 is not the most common kit available only in resin or vacu if you what to go for a 1/72. There is 1/48 kit from PilotReplicas to be released sometime. We hope soon!

Michael Kohl
Following

Ben M
👁️👁️

Robin (WhiteGlint)
Count me in 👀 👍

Vincent
Great result. I really like the scheme also!!

Rui S
Very nice work 👍

Skyhiker
That came out nice. These gliders are one of my favorite subjects.

Villiers de Vos
Very nice work.

gorby
Excellent!

Guy Rump
Great work! 👍

Robert Podkoński
Very nice indeed!

Villiers de Vos
Booking my seat.

Patryk S. Автор
As I travel often between Germany and Poland and did move my workshop to DEU I decided to duplicate it in Poland as to not loose time without my hobby. This is my first pararel project in the workbench in Poland. Another short run.

Cuajete
Unusual model... Following!
Lucky to have duplicated your workshop 🙂 👍

Guy Rump
Watching 👍

Patryk S. Автор
Cleaned up the wing today and deepened the first wheel well. Did use pattex sos glue to fill the edges. I can not reccomend this glue enough - it works far better than any filler and is easy to sand. I use it also as glue where possible as it gives a strong join.

Patryk S. Автор
@Cuajete and Guy: welcome! I bought jut the tools needed to do simple kits so I do not waste my time on not modeling 🙂

Patryk S. Автор
Deepend the second wheel well and removed the injection stubs. The plastic is very hard to sand but very easy prone to overscraping wit a scalpel blade. This is going to be a greater challenge than the hawk.

Cuajete
Good job so far 👍

Villiers de Vos
This little gem will need a lot of TLC. I looking forward to following your progress.

Robert Podkoński
Watching with interest for sure! (just a word of warning here, Patryk - I remeber from one review of this kit that the vacu canopy is too small - have you checked it already?)

Daniel Klink
You're a brave man Patryk 🙂
Following👍

Patryk S. Автор
Thank you for joining Robert and Daniel! @Robert: I did a search for builds of this kit - there is a problem with canopy fit but nothing not to overcome. I did actualy stumble on an open canopy picture of the XP-77 during the search - the canopy didn't slide back but went rotating downwards flush into the fuselage so only the front frame is visible after opening. If I will have to much problems with fit I might replicate it in the open position.

Vincent
Well this is interesting good luck on this one!!!

Robert Podkoński
Open canopy surely would add more interest to this fascinating plane, Patryk 😉

Patryk S. Автор
Managed to cut of and sand the resin from the castings block, unfortunately breaking the rear cockpit wall in the proces. Glued it and the control stick to the tub with pattex sos glue. Additionaly i managed to prime the resin parts.
Thank you for joining and the comments Mates!

Patryk S. Автор
Dry fitted the resin inserts - they fit very good to the fuselage halves - no sidewall trimming needed. After that I primed the back portion of the seat and the insides of the fuselage.

Łukasz Gliński
Missed this one so far. Thx for the glue tip 👍

Neil
Following also mate 👍👀

Patryk S. Автор
Thanks for joining Łukasz and Neil!

Patryk S. Автор
First layer on the resin parts and fuselage interior painted. I prefer to brush paint small parts in this scale, saves a lot of time of paintbrush cleaning and after a clear coat and wash you don't actually see any difference. The Ranger V770 engine on 99% of pictures I have seen was pained Neutral Gray, so I went with this suggestion. The instruction states that it was black.

Patryk S. Автор
Second layer on. Started some detail painting in the cockpit and did clean up some of the kits parts. Thank you for joining Villiers!

Cuajete
Well done so far 👍

Patryk S. Автор
Did some rought preliminary detail painting on the seat and engine - it will be corrected after the second layer. Need to get sone rust and copper colors from my workbench in Germany to finish the engine detail paintig. Did also test fit the exaust ports to the fuselage sides - much trimming was needed for both the ports and fulelage to get a good fit. You can see the difference - lower on the picture is the fuselage side which is allready corrected.

Patryk S. Автор
More datail painting and silver drybrushing for the seat and cockpit. Small corrections needed, the camera catches more than my eyes. Next a coat of clear flat and a dark wash awaits.

Patryk S. Автор
Managed to glue the cockpit together, working on parts cleanup, which is extremely difficult due to the plastic beeing extremely sanding paper resistant. Reworking the exhaust system to beter match the original.

Robert Podkoński
I am impressed with your perseverance here, Patryk. Keep it up!

Patryk S. Автор
Thank you Robert!

Patryk S. Автор
Cleaned up all of the parts and sanded them to 2500 grit, now they are ready for priming. Assembled the propeller and glued the engine front in one of the fuselage sides.

Robert Blaschke
Fingers crossed 🙂
One of special features of this plane was, that the canopy was not opening by sliding, but rotating backwards into the back fuselage. 🙂
Youtube Video

Patryk S. Автор
Thank You for this valuable reference Robert! It helped to solve some questions that I had, might reeork the exhaust system after seeing this.

Patryk S. Автор
Primed the small parts with the 1st layer of Tamiya spray matt black.

Patryk S. Автор
Did prime the other side of the small parts with the 1st layer of tamiya black matt. Rescribed one side of the fuselage as the original scribing was almost invisible and added a document pocket to make the cocpit a bit more busy. Did also put the first layer of Interrior green to the front wheel bay.

Cuajete
👍

Patryk S. Автор
Glued the wheel bay and cockpit to the fuselage side today. No issues with fit.

Cuajete
That sounds really good, Patryk 👍

Moreno Baruffini
I agree with Cuajete, very good!

Patryk S. Автор
Thanks Mates, dry fitted the fuselage halves together and no issues besides some putty will be needed in the lower part of the front fuselage. The wing will need some shimming of material where it meets the front wheel bay but nothing significant. Having more fun with this one than the P-36 or the mainstream U-2A.

Patryk S. Автор
Some advice needed dear Mates: what glue is best to use by vacuform canopies? This is my first attempt, do not want to mess it up.

Robert Podkoński
In such cases I first glue some pieces of stretched sprue (made square-ish in section first with a knife) around the edge of the opening (in distance from the outer edge equal-ish to the canopy thickness) and then I use drops of thin cyanoacrylate glue one-by-one letting each flow under the edge of the canopy and dry for few seconds before applying the next one... But it is quite time and nerve consuming...

Patryk S. Автор
Thanks for the advice Robert!

Łukasz Gliński
Well, I guess there are as many ideas as the mates who use the vacu canopies. I'm afraid of putting together transparent parts and CA glue, so I either stick to some sort of PVA/Kristal Klear (forget the sanding afterwards) or UV glue (usually Bondic, can be sanded after drying very well in UV light).

Patryk S. Автор
Thank You for the advice Łukasz, maybe the ye olde card modeling technique wil be also a feasible solution - butapren glue 😜

Patryk S. Автор
Will look for the Bondic if its available also.

Robert Podkoński
Bondic is a good idea, much less risky than CA glue - the UV setting glue was available in Germany under Revell brand too (I bought such a set few years ago while visiting Erfurt)

Łukasz Gliński
Ahhh, butapren, never forget 😁How did it go?
- Granma, have you seen my butapren?
- Nope, but have you seen that dragon in the kitchen?
For the non-Polish readers: this glue used to contain trichloroethylene when we were young 😄

Thomas Espe
Oi, missed this one so far. 👀
Looking good

Patryk S. Автор
Welcome Thomas!
@Łukasz: Thats a good one😂. I remeber in my town the nice lady that worked in the shop that had then in the 90's would sell me only one tube at a time because she was concerned about my health.😜 I was a card modeler for many years, converted to plastic only a few years ago.

Patryk S. Автор
@Robert: Thanks, I will try too look it up next week in Germany.

Cuajete
In injected plastic, it usually works to protect the cockpit from the ciano by immersing it in Future (or similar) and letting it dry before gluing with ciano. In vacu I don't know, but I guess it will work too. However, I wouldn't risk it if you only have one copy of the vacu.

Patryk S. Автор
@Cuajete: thank you, this is an interresting method indeed. Thinking about making an opened canopy which will reduce the effort and show more detail in the cockpit.

Patryk S. Автор
Progress so far. Added weight to the fuselage an closed it. Managed to paint most of the small parts also. Fit was good in regards of joining the fuselage. A long sanding session awaits in order to get a smooth effect before adding black primer. Also rescribed the panel lines as they were too shalow. Also need to rework the exhaust in the closed position as depicted on the reference I got.

Robert Podkoński
Keep it up, Patryk!

Patryk S. Автор
I will Robert! It will be done, currently working on 5 projects divided between homes in Poland and Germany, so it might take some time. Thanks for still beeing here!

Jennifer Franklin
Looking good, keep it up!

Patryk S. Автор
Thank You Jennifer!

S M
Good dedication on details. Following!

Thomas Espe
👀

Patryk S. Автор
Welcome S M and Thomas! Thanks for watching!

Patryk S. Автор
Update: scribed the lover wing using photo s and the 1:48 czech model kit as references. Small corrections will be needed but under a few coats of black primer and then silver the effect will be ok. The kit had almost no detail on the underside of the wing.

Cuajete
Good progress 👍

Patryk S. Автор
The fight continues. Rescribed the right side and reworked the exhaust according to photos and the czech model kit. Painted all the small bits. Looks maybe a bit rough on the picture but pretty much ok for the normal eye - it will be refined before priming

Robert Podkoński
It is good to see some progress here. Keep it up, Patryk!

Cuajete
I agree with Robert 👍

Patryk S. Автор
Thank you Robert and Cuajete!

Patryk S. Автор
The fight continues. Did attach the wings to the fuselage, the fit was very poor. I filled the gaps with pattex sos glue which I use as filler with very good results. Sanded one side with 800 grit sanding paper and got a flush join.

Nicolas
I'm taking a seat.

Patryk S. Автор
Welcome Nicolas!

Cuajete
Good progress.

Patryk S. Автор
Done also with the other side with rescribing, reshaping of the exhhaust system anf filling and sanding gaps between the wing and the fuselage. The underside awaits.

Michael Kohl
The old Special Hobby kits are not for the faint of heart.
Keep going. Looks good what you achieved so far.
I like the Pattex super glue too.

Patryk S. Автор
Thank you for you kind comment Michael! I am satisfied with the progress so far as it is a very challenging kit to get right.

Patryk S. Автор
Work continues. Rescribed and scribed all the missing detail as seen on period photos. Got over the hardest part which was canopy attachment. Dipped it with a german equivalent of future clear first, then fitted it to the fuselage and carefully worked around it with super glue to good effect. Need to do this a few times in order to blend the canopy into the fuselage. There were some gaps between the canopy and fuselage but they were filled succesfully with super glue.

Robert Podkoński
Great job with the canopy, Patryk! The finish line is on a horizon now 😉

Cuajete
Patryk, you did well to immerse the transparent part in Future to protect it from the gases produced by the cyano.
You are doing a fantastic job with this kit 👍

Patryk S. Автор
Thank you for your kind comment. The build will still take some time as I want to experiment with the new eduard 3d panels and see if they can withstand spray can painting. I will try to coat them with this german Future gloss equvalent as I already tested it on decals and several spray can paints and sealers and this stuff withstands everything I was able to test it on to this time.

Patryk S. Автор
Completed the sanding around the canopy. I am very satisfied with the result. It is maybe not visible on the picture but I managed to get a flush connection of the canopy to the fuselage.

Patryk S. Автор
Attached the horizontal stabilisers with pattex gel glue to have time to tweak their position as they do not have any attachment points. Had to sand both to get a similar look as one was bigger as the other. It is ready for painting, now on to test the eduard panel decals and to see how they stick to the plastic and react to tamiya spray paints.

Cuajete
Well done so far 👍

Patryk S. Автор
Thank You Cuajete!

Patryk S. Автор
Propeller done.

Patryk S. Автор
The fight continues. Corrected the rudder and reshaped the nose a bit to more resemble the original - unfotunately the ca gel I used went into reaction with the painted resin engine and I need to repaint it after I paint the fuselage. Did prime it with the first coat but unfortunately found many areas to correct - its an old short run after all. Did rework the cooling system - it looks better live then on the picture. I think it begins to turn out ok. Time for the next coat.

Daniel Klink
Respect.your endurance is really impressive 👍

Patryk S. Автор
Thank you Daniel. No kit gets left behind on my bench😜

Łukasz Gliński
Respect keep it up 👍 It looks really smooth on the last pic

Patryk S. Автор
Thank you Łukasz!

Villiers de Vos
Very nice progress.

Michael Kohl
Keep it up. Looking good.

Jennifer Franklin
The propellor looks good. Looking good in general.

Cuajete
I agree with the mates 👍
Cheer up!

Moreno Baruffini
I also agree with the above!!!! 👍🏼

Patryk S. Автор
Thank you for you kind comments Mates!

Patryk S. Автор
After 3 surface correction sessions it is finally ready for the first coat of paint.

Patryk S. Автор
Main paint job done. Now on to seal it and to start detail painting.

Villiers de Vos
Nice progress.

Rui S
Looks great 👍 I'm in 😎

Martin Weinpold
Im in!

Neuling
Joining .........

Guy Rump
Following too! 👍