Стрічка новин
Joseph Russo
додав новий фотоальбом.
додав новий фотоальбом.
19 зображення
Panther G CutawayНовий: 1 October, 03:26 1:35
Lightly weathered lower turret
Проект: Panther Ausf. G Cutaway
3 26 September, 04:05
Dave Burgess
додав новий фотоальбом.
додав новий фотоальбом.
15 July 2018, 19:51
Dave Burgess
I bought this through E-Bay, only to find the kit had already been started, and a couple of key pieces were missing. Fortunately, I was refunded, and the seller let me keep the model.
In order to build it, I had to pour a couple of replacement resin pieces; it cost me more for the resin and casting material than I paid for the kit! Still, in the end, it turned out quite well. Because it was much more work, I think I have a soft spot for this one over the yellow/red Labrador
I bought this through E-Bay, only to find the kit had already been started, and a couple of key pieces were missing. Fortunately, I was refunded, and the seller let me keep the model.
In order to build it, I had to pour a couple of replacement resin pieces; it cost me more for the resin and casting material than I paid for the kit! Still, in the end, it turned out quite well. Because it was much more work, I think I have a soft spot for this one over the yellow/red Labrador
21 July 2018, 19:13
Kate Ward
Getting back into modeling after 20 years. So many things are different!
26 September, 16:56
gorby
Welcome back to modelling Kate. Sticking bits of plastic together is very different to when we were all younger and some aspects seem to be a lot more confusing than they used to be. Youtube is a very good place to find tutorials or feel free to ask questions here.
Welcome back to modelling Kate. Sticking bits of plastic together is very different to when we were all younger and some aspects seem to be a lot more confusing than they used to be. Youtube is a very good place to find tutorials or feel free to ask questions here.
30 September, 06:28
Kate Ward
Thanks! I've been watching two channels already, Night Shift and Panzermeister36. I'd welcome any reccomendations for more. 'Specially some that are aircraft-focused, since my next build after the KV will be Border's B5N2 Kate. (I had to pick that one, it's got my name on it. I only started on the KV first because it arrived in the mail a day earlier.)
Thanks! I've been watching two channels already, Night Shift and Panzermeister36. I'd welcome any reccomendations for more. 'Specially some that are aircraft-focused, since my next build after the KV will be Border's B5N2 Kate. (I had to pick that one, it's got my name on it. I only started on the KV first because it arrived in the mail a day earlier.)
1 October, 03:19
Steve
володіє цим предметом
володіє цим предметом
German
Panzerkampfwagen II Ausf. A/B/C (Sd.Kfz. 121) (French Campaign) Tamiya 1:48
32570 2011 Нова прес-форма 1 October, 03:12
Cristian A
додав новий фотоальбом.
додав новий фотоальбом.
4 зображення
KA-52 Alligator Ukraine War - Final RevealНовий: 30 September, 13:15 1:72
Проект: Ka-52 "Alligator"
14 30 September, 13:15
Cristian A
The Alligator is finished, I appreciate the professional photos from my IPMS club colleagues. More photos will be added to this album later.
The Alligator is finished, I appreciate the professional photos from my IPMS club colleagues. More photos will be added to this album later.
30 September, 13:19
servalpe
додав новий фотоальбом.
додав новий фотоальбом.
16 14 September, 10:03
servalpe
Thanks guys for your interest and comments. This project will be finished next year. I am getting all stuff for the project. The first pictures are "dry-fitting" with base model (HB kit).
Thanks guys for your interest and comments. This project will be finished next year. I am getting all stuff for the project. The first pictures are "dry-fitting" with base model (HB kit).
16 September, 14:34
Steve
володіє цим предметом
володіє цим предметом
Scale Modeling WW2 German Camouflage Uniforms 1/35 German Camouflage Uniforms - retail edition
Step-By-Step № 1
Pavel Beranek
2023 1 October, 03:06
Mondria
хоче цей предмет
хоче цей предмет
North-American/Rockwell
OV-10D+ Bronco US attack and observation aircraft ICM 1:72
72186 2023 Нові деталі 1 October, 02:59
KMorelMarine
володіє цим предметом
володіє цим предметом
MRAP Radio Set (Resin Kit) RM-5032 - M-ATV (MRAP All Terrain Vehicle) M1240A1
Rye Field Model (RFM) 1:35
1002 2019 Нова прес-форма 1 October, 02:58
Donald Dickson II
додав новий фотоальбом.
додав новий фотоальбом.
15 9 September, 01:56
Donald Dickson II
OK. Well I decided since I was bogged down in my other builds, Id go ahead and do this one.
Frank Frazetta has always been a favorite of mine. I fell in love with his stuff seeing the covers of Conan paperbacks. Then in 78 the first Molly Hatchet album came out with this as its cover. I bought that album based SOLELY on that cover as it was their first and I hadnt heard them yet. LOL Luckily they were a great band. LOL
There is a Frazetta museum here in Stroudsburg PA, about 3 hours from my house. Im planning on taking this there and taking pics of it there. IF it comes out worth a damn.
OK, so, its a relatively simple build. BUT, as you can see, while the fit is OK, it has serious seems. *sigh* Its gonna require a little more work than I was hoping for.
I am not attaching the arms or head to the rider yet, nor the cloak. Those will be painted then attached to make it easier. The things like reigns are separate pieces that will get painted then all put together.
Next session is getting those seams done.
OK. Well I decided since I was bogged down in my other builds, Id go ahead and do this one.
Frank Frazetta has always been a favorite of mine. I fell in love with his stuff seeing the covers of Conan paperbacks. Then in 78 the first Molly Hatchet album came out with this as its cover. I bought that album based SOLELY on that cover as it was their first and I hadnt heard them yet. LOL Luckily they were a great band. LOL
There is a Frazetta museum here in Stroudsburg PA, about 3 hours from my house. Im planning on taking this there and taking pics of it there. IF it comes out worth a damn.
OK, so, its a relatively simple build. BUT, as you can see, while the fit is OK, it has serious seems. *sigh* Its gonna require a little more work than I was hoping for.
I am not attaching the arms or head to the rider yet, nor the cloak. Those will be painted then attached to make it easier. The things like reigns are separate pieces that will get painted then all put together.
Next session is getting those seams done.
9 September, 01:57
Donald Dickson II
After way more work on the seams than should have been necessary, initial flat black coat on. I sprayed the head after the pic. Also the base in dark earth as a base for that.
After way more work on the seams than should have been necessary, initial flat black coat on. I sprayed the head after the pic. Also the base in dark earth as a base for that.
12 September, 04:35
Erik
Frazettas Death Dealer is really cool, I have the kit too. But bringing his style into color on a three-dimensional model is not easy.
Frazettas Death Dealer is really cool, I have the kit too. But bringing his style into color on a three-dimensional model is not easy.
12 September, 07:25
Erik
You can do it! 😎
Roman tried to realize him in 28mm.
puttyandpaint.com/projects/36844
You can do it! 😎
Roman tried to realize him in 28mm.
puttyandpaint.com/projects/36844
12 September, 18:00
Donald Dickson II
Thank you Erik. 🙂
Started with some of the easier detail painting. Still working out how to shade the horse.
Thank you Erik. 🙂
Started with some of the easier detail painting. Still working out how to shade the horse.
12 September, 20:03
Donald Dickson II
I have been busy with life and new toys. Got a resin 3D printer, so been messing with that quite a bit. Im gonna do a post on that separate.
I have gotten quite a bit done on this one. Some more detail things to do, the ax, the sword and it will be done. Have some seams I realized I missed to do also. But nothing awful. And do a little more "weathering". So next post will be it completed.
I have been busy with life and new toys. Got a resin 3D printer, so been messing with that quite a bit. Im gonna do a post on that separate.
I have gotten quite a bit done on this one. Some more detail things to do, the ax, the sword and it will be done. Have some seams I realized I missed to do also. But nothing awful. And do a little more "weathering". So next post will be it completed.
29 September, 04:33
Donald Dickson II
So he is all done. While the details are awesome, and I understand they are bringing a 2D image to a model, the fit should have been better. And it has some design issues, especially the sword. All that being said, it turned out great I think. If you get it, just be aware it takes a bit of work, but worth it.
So he is all done. While the details are awesome, and I understand they are bringing a 2D image to a model, the fit should have been better. And it has some design issues, especially the sword. All that being said, it turned out great I think. If you get it, just be aware it takes a bit of work, but worth it.
29 September, 22:27
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=uk
35
35
/uk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo