база даних масштабного моделювання | менеджер запасів
Ronan
Ronan
FR

A-6A Intruder Trumpeter

Коментарі

149 19 May, 16:00
Harald Besold
Starts promising! Nice details. 👍
19 May, 16:10
Harry Eder
Great start! I´ll take a seat 🙂
24 May, 08:50
Daniel Mysak
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
24 May, 09:05
Alec K
What! No rotor blades? 😂. I am in, nice detailing as always 👍
24 May, 12:30
Hajo Lippke
Great, another Ronan-project!
24 May, 13:19
Oleg Bogolei
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
24 May, 13:25
Maciej Bellos
I am in too. Source of inspiration this build will be 😄
24 May, 13:35
Łukasz Gliński
Been waiting for this 👍
24 May, 13:58
Patrick Hagelstein
Oh yes! A combo of Ronan and Intruder: obligatory to follow! 🙂
24 May, 14:33
Ronan
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
24 May, 15:19
Ronan
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
24 May, 15:25
Sergej I
AWESOME! 👍
31 May, 08:42
Maciej Bellos
Oh WOW!
31 May, 09:30
Juergen Klinglhuber
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
31 May, 15:51
Ronan
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
31 May, 19:11
Skyhiker
Another straight out of the box build I see. 😉
1 June, 01:47
Bas Tonn
Great, can't wait for more pics
2 June, 11:03
Ronan
Many thanks,
The build keeps on quietly 😉
10 June, 08:14
Alec K
Nice progress, the cockpit looks amazing 👍
10 June, 13:43
Ronan
Thanks Alek 😉

Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
10 June, 17:42
Oliver Zwiener
Take a seat
10 June, 18:03
Patrick Hagelstein
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
10 June, 18:29
Michael Kohl
Following
11 June, 01:26
Alec K
It's looking excellent 👍
24 June, 13:01
Eric Duval
Joli travail 🙂
30 June, 20:14
Ronan
Merci camarade 😊
1 July, 06:28
Ronan
😉
21 July, 19:35
Skyhiker
These planes always remind me of giant bugs for some reason.
21 July, 19:44
Ronan
I think it looks like a tapdole 😉
22 July, 18:37
Bernd Grün
Nice progress, Ronan! 👌 Looking for the final result.
23 July, 06:33
Ronan
Thanks Bernd, i hope to finish it very soon 😉
23 July, 12:13
Skyhiker
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉
23 July, 12:56
Micky
Love the Intruder Ronan. Nice cockpit and build so far!!
23 July, 13:23
Palo M
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂

Is the "Hobbyboss" in the album title a joke or a mistake?
23 July, 14:32
Ronan
Of course , it is a mistake : the correct title should be trumpeter 😉
24 July, 06:24
Ronan
although Hobbyboss and Trumpeter are the same company ...
24 July, 06:30
Ronan
The decals step is done 😉
27 July, 07:04
Guy Rump
Looking great, I know I'm late but following. 👍
27 July, 07:08
Spanjaard
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....
27 July, 07:59
J35J
Great progress, another gem from you!👍🏻
27 July, 08:01
Ronan
Many thanks 😉
27 July, 08:01
Palo M
Fantastic and clean work, verry impressive!
27 July, 08:30
Alec K
It's looking glorious Ronan 👍
27 July, 12:50
Ronan
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.
29 July, 07:51
Shar Dipree
Looks great so far. 👍
29 July, 08:17
Eric Duval
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂
3 August, 18:43
Ronan
Merci Eric,
Je ne sais pas s'il va être incroyable mais il devrait être sympa 👍
4 August, 06:23
Ronan
That's it, I finished it 😉
6 August, 10:38
Spanjaard
fantastic, congratulations
6 August, 10:40
Eric Duval
Ben voilà, il est magnifique 🙂
6 August, 11:39
Patrick Hagelstein
Magnificent! 👌🏼
6 August, 12:18
DerMattes
Fantastic build!
6 August, 12:26
Harry Eder
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?
6 August, 14:04
Shar Dipree
Great result. 👍
6 August, 16:30
Ronan
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂
6 August, 16:41
J35J
Excellent work! Congrats👍🏻
6 August, 16:50
Micky
Masterpiece!!
6 August, 17:54
Oliver Zwiener
Klasse Ding !
6 August, 17:59
Łukasz Gliński
Outstanding, love that hi-vis USN/USMC camo 👍
6 August, 19:30
WAHO LEU
Great Job. I loving it.
7 August, 07:19
Ronan
Many thanks, mates 👍
7 August, 07:46
Michael Kohl
I am starting to like the Intruder and I definitely like your model of it.
7 August, 10:14
Alec K
Outstanding and inspirational build 👍
7 August, 12:41
Ekki
Excellent!
7 August, 17:04
Juergen Klinglhuber
Ronan - real great job 👍 👍
7 August, 18:58
Ronan
Many thanks, mates 😉
8 August, 07:08
Tibor Szilvai
Superb! 👍
8 August, 10:54
Daniel Mysak
Great looking Intruder👍
8 August, 12:12
Thomas Kolb
That looks spectacular! I really like the folded wings! And the painting with that careful weathering is beautifully done. I wouldn't have been surprised if it was 1:48.
8 August, 13:29
Ray Loch
This level of detail and paint quality in 1/72, Bravo. Hoping my 1/48 turns out this well.
8 August, 16:41
Ronan
Many thanks all for nice coments 😉
9 August, 07:10
Guy Rump
Excellent modelling, I look at it in awe! 👍
9 August, 14:54
Music_On
There are a lot of amazing models here on Scalemates.com, but yours is exceptional! Little things like making sure the forward landing gear doors are correctly opened for the "cold" state of the jet, the hydraulic lines, etc., not to mention immaculate finish. At first glance I thought it was 1/48! I hope you compete this at a show, it's a winner for sure!
9 August, 16:09
NICOLAS GRANDMONTAGNE
Encore une superbe réussite!
Bravo Ronan! 😃
9 August, 18:55
Donald Dickson II
There is nothing you ever put out that isnt beyond excellent.
9 August, 19:07
Ronan
Thank you all 😉
10 August, 08:07
ZHOU Kun
Great craftmanship! Absolutely a masterpiece!
26 October, 13:47
Ronan
Many thanks, sir 😉
26 October, 15:29
Clement
1st class result as usual. Your work never ceases to amaze me.
26 October, 15:40
B. M.
Ronan can also build planes 🙂
And in what a way! Fantastic result I especially like the pictures with both Intruders together, an eye catcher.
Ever thought of building a little diorama!? 😎
They just call for that.
Cheers
Benoit
27 October, 07:06
Ronan
Many thanks , mates 😉
I'm not a big fan of dioramas, i like simple scenes.
I think that the more things we put around the plane, the more the plane itself loses its interest; that's why I often don't add anything other than the plane. However, I admire the dioramas which are very well done...
27 October, 07:51

Project info

54 зображення
1:72
Завершені
1:72 Marine A-6A's & EA-6A's (Microscale 72-079)1:72 A-6A Intruder (Trumpeter 01640)
Grumman A-6A Intruder
US US Marine Corps Aviation (1912-now)
VMA(AW)-242 Bats 155624 (DT-04)
Жовтень 1969 Vietnam War - Chu Lai VN
Gull grey over White
 

Усі альбоми

Переглянути всі альбоми »