Mig-15 bis Fagot B/ Trumpeter

1
May 24, 2014
2
May 24, 2014
3
May 24, 2014
4
May 24, 2014
5
May 24, 2014
6
May 30, 2014
7
May 30, 2014
8
May 30, 2014
9
May 30, 2014
10
May 30, 2014
11
June 16, 2014
12
June 16, 2014
13
June 16, 2014
14
June 16, 2014
15
June 25, 2014
16
June 25, 2014
17
June 25, 2014
18
June 25, 2014
19
June 25, 2014
20
July 7, 2014
21
July 7, 2014
22
July 7, 2014
23
July 8, 2014
24
July 8, 2014
25
July 8, 2014
26
July 8, 2014
27
July 10, 2014
28
July 10, 2014
29
July 10, 2014
30
July 10, 2014
31
July 10, 2014
32
July 10, 2014
33
July 10, 2014
34
July 10, 2014
35
July 10, 2014
36
July 10, 2014
37
July 10, 2014
38
July 10, 2014
39
July 10, 2014

Коментарі

1 24 May 2014, 17:19

Roland Sachsenhofer
The second Fagot B is on the bench, this should give opportunity for a comparision with Tamiyas boxing. It starts as usual: with Gunze colour and the cockpit... I did so with the friendly aid of Eduard.

24 May 2014, 17:24

Carlos Medrano
Beautiful work! What glue did you used for the PE? Great work...

24 May 2014, 17:35

Roland Sachsenhofer
Thank you! I am using Cyanacrylad-glue of variable consistency- from very thin to thick.

25 May 2014, 06:43

Roland Sachsenhofer
The parts have just been glued together, no cleaning up of glue seems... You can see the huge amount of sanding and filling which will be necessary. I will show the gun housing fully exposed, therefore the open bow section.

30 May 2014, 14:52

Roland Sachsenhofer
Some new pictures, the first layer of Alclad "White Aluminum" has been sprayed. It will be polished and completed with a second layer. After that, on certain regions "Steel" and "Dark Aluminum" will bei applied.

16 June 2014, 06:18

Roland Sachsenhofer
Decals have been applied and sealed wth Gunze gloss-clear. Next will come a decent washing and weathering...

25 June 2014, 15:43

Roland Sachsenhofer
I did a little more weathering... next step will be polishing and smoothening the surfaces, then a final coat of dull clear will finish the NMF appearance.

7 July 2014, 11:56

Roland Sachsenhofer
After having tried to get the things looking a little more "busy" you can see the result on the new pictures. Something like this it once will look like....

8 July 2014, 09:19

Albi Hitz
Another beauty from Rolands Jet Factory! It looks very nice.
Any problems with the Alclad surface when you use masking tape?
How is the metallic look after you sprayed Gunzes Gloss Clear on it?
Some say it could turn a little bit dull. Is it ok with the Gunze stuff or would it make sense to use the Alclad stuff .... What do you think?

8 July 2014, 09:30

Roland Sachsenhofer
Thank you these kind ans motivating words Albi!
I did not encounter masking related problems on Alclad surfaces since I am priming with "glossy black"- from the Gunze colour range of course 🙂
For me it seems that any alteration of the original Alclad surface makes a difference- and that is, in most cases, not an improvement. In spite of that I am going to put glossy clear on all Alclad surfaces because it supports a essentially better looking decal application than without it. And, in my opinion, any effect is easely reversed with a careful use of "matt clear".
I have no opinion to the Alclad stuff- I have never used it, and it seems I will not use it in future because Gunze compliments Alclad products very well.

8 July 2014, 15:50

Roland Sachsenhofer
Just finished! Captain Milayushins Mig-15bis has left the workbench... No major problems encounter through the final steps. The most complex challenge was the attachment of the weapons gondola tangling from the roof of the weapons bay.
Thanks for your interest, hope you like it 🙂

10 July 2014, 11:07