Messerschmitt Me 262A-1a/U3
Коментарі
2 15 February 2015, 22:06
![](/profiles/img/12992-331-s.jpg)
I'll be following this one as I have it in my stash as well. Liking what I see so far!
16 February 2015, 10:15
![](/profiles/img/11530-326-s.jpg)
Thank you, mates! This kit has a top price/performance ratio. I've just fitted the wings and the fit is close to perfect. The only small disadvantages are the slightly wrong nose shape (only nerds will notice) and -only for the recce version- two wrong cannon ports in the nose tip who are to be filled.
20 February 2015, 08:24
![](/profiles/img/10232-810-s.jpg)
Wow, this is really looking good!
Seems as HobbyBoss made a good job! And you too, Torben!
20 February 2015, 09:34
![](/profiles/img/11530-326-s.jpg)
The light blue base is done. Next step is to do the meander scheme. Not an easy task at all.
14 May 2015, 14:05
![](/profiles/img/14265-431-s.jpg)
Cute ... I have built the twin seat version as a nghtfighter. Fair value for the price ...
14 May 2015, 22:16
![](/profiles/img/11530-326-s.jpg)
Spent some time to apply that meander scheme. Not my cleanest work, but the real ones were painted free hand in the woods with spare colors, so I think I could come away with it.
21 December 2015, 23:56
![](/profiles/img/11530-326-s.jpg)
Thank you gentleman!
M.A.: You mean for not disturbing the lines of the airframe? Bit boring though...
22 December 2015, 11:27
![](/profiles/img/10518-177-s.jpg)
Hope you still have some space to place your awards for this build on! I am sure you will get lot´s of first prizes with this one!
8 April 2016, 05:34
![](/profiles/img/11530-326-s.jpg)
Thank you very much, Gentleman! It was an on and off-project for over a year and I lost motivation for it several times. But I learned a lot about airbrushing along the process and I made my first step into creating model bases.
I can't praise HB high enough for providing us with such a nice kit of a 262 for such a small price tag.
Thomas: Don't make me blush! I hope I'll make it to Cheb this year and maybe I participate on the contest there.
8 April 2016, 19:11
![](/profiles/img/16888-946-s.jpg)
how did you manage to control the oversray? I tried a similar scheme on a BF110-G4 and it was not as successful as yours. That was with a Badger 360 but even since i got a Harder and Steinbeck Infinity with a fine needle i still get overspray when doing fine lines. you have mastered it.
8 April 2016, 22:29
![](/profiles/img/11530-326-s.jpg)
Now Alistair, to be honest there is some overspray that this blurry picture gently hides. But overall I'm satisfied for my first attempt on such a complex scheme. I used heavily thinned Mr.Aqueous paints (60% Mr.Color lacquer thinner). Lacquer thinner works perfect for this type of acrylic based colors. Worked with a 0.3 mm needle and 0.8 bar pressure. Due to the thin color you have to build up the lines in 2 or 3 layers. It's a bit tough to follow the lines a second and third time, but you are able to laminate little flaws of the foregoing attempts.
Patience is (as always) the key. I needed three sessions to finish the camo and letting my wrist recover. 🙂
8 April 2016, 23:34
![](/profiles/img/user-s.jpg)
Hello Allistair, I tried someting similar on a Ta-152, and then I found that a thin mix of tamiya (40%paint/60%thinner) spraying at low pressure and close to the model (a few mm's), without the needle protection of the AB (for some reason you can spray thinner lines, I guess it has has something to do with air turning around in the spray cap) gives the best results, while not holding the AB still at one point. Just by changing the speed at which you pass over the surface and building up the lines slowly gives a rather good result. I also try not to start spraying above my model but outside of it to avoid a first blob of paint. When passing fast enough to the point where you want to start nothing will be seen. But as always, before I do that, I exercise on a bottle till I get the feeling in my fingers of the pressure, and how to set the airbrush.
11 April 2016, 06:54
![](/profiles/img/10518-177-s.jpg)
Exercising on a bottle! That´s smart! Never thought about doing this. Thank you!
11 April 2016, 09:04
![](/profiles/img/user-s.jpg)
It works better for me than on paper, because it doesn't absorb the moisture when the paint was thinned to much (I received this tip also from a friend 😉 )
11 April 2016, 09:12
![](/profiles/img/11530-326-s.jpg)
Thanks for the explanation, Bart. I also work without the needle protection attached.
Like the idea with the bottle, too.
11 April 2016, 14:34
![](/profiles/img/16888-946-s.jpg)
Thanks for the advice guys. I will persevere, practice makes perfect
15 April 2016, 09:41
Album info
Building this one as Wk-Nr. 170111 (not 100% proofed) like it was found in Lechfeld or Schwäbisch-Hall in April '45. Two first-timer for me included here: Using Alclad and a "Mäander-Tarnung". It was fitted with a single MK 108 in its nose.