Chassis and Crossbows

1
August 5, 2018
This is my first AMT kit. I like the stiffness of the plastic parts. It feels like a solid, durable kit.
2
August 5, 2018
3
August 5, 2018
Engine build is underway. I didn't have Chevrolet engine red, so I used a base coat of X-7 Red and went over it with a coat of Clear Orange.
4
August 6, 2018
I went for the custom option and added the velocity stacks and Offenhauser valve covers. I will have to cut a hole in the hood to make room.
5
August 18, 2018
Starting on some rusty wheels. First is a base coat of Tamiya XF-9 Hull Red with some dashes of X-26 Clear Orange.
6
August 18, 2018
Globs of liquid masking film go over top to provide something for chipping and scraping once the overcoat is applied.
7
August 18, 2018
Tamiya XF-16 Flat Aluminum goes overtop and gets plenty of drying time.
8
August 18, 2018
The masking film is scraped off haphazardly with a finger nail in spots to provide a rusty look. I did wind up dabbing on some light bits of Clear Orange again with my thumb and rubbing it around to get a little more variety to the colour.
9
August 18, 2018
The wheel on the left has been distressed with a rough grade file. It adds a nice dusty and worn look that will look even better once some brake dust is added and they get some dirt on them.
10
August 18, 2018
Some paint tests for the cloth part of the seats. After sorting through a bunch of colours, the sequence on the left has won out. Olive Drab, Khaki, Buff, and Deck Tan for the stitching.
11
August 18, 2018
Hope this works. The cloth portion has been painted over with XF-57 Buff, being the lightest of the three weaves. When it's dry I will mask off some stripes and start with the next tone.
12
August 23, 2018
Masking off some stripes. Tried to get a consistent 10th-inch width for each colour, but they ended up a little uneven.
13
August 23, 2018
The stripes are pretty close in tone to the originals, if not to perfect scale. There's some bleeding through under the tape here but it got cleaned up afterward.
14
August 23, 2018
Using a knife to paint the embroidery and stitching, and coating the vinyl areas with MicroFlat to give them a different sheen from the cloth inset. Not perfect, but after 4 hours it's close enough.
15
September 2, 2018
Started on the door panels. Fiddly business painting some of that trim, and with just a bit more touch up I'll be happy.
16
September 3, 2018
Trying to match the carpet colour I wanted, a base of Khaki with some Gold drybrushed in and a thumb-grimed brushing of Olive Drab/Flat Brown mix over top.
17
September 3, 2018
Interior assembly, stage one. Side panels and seats are in place.
18
September 3, 2018
The interior has taken me more time than all the rest of the work so far. The dashboard is going to be a tough one to paint as well. Lots of fine details.
19
September 9, 2018
Double-coat of drybrush to highlight those raised speedometer numbers. First a brush of white, followed by clear green. And of course it will never be seen once installed.
20
September 9, 2018
Base dash is done. A mix of Olive Drab and Hull Red for a chestnutty wood finish.
21
September 9, 2018
Custom gauges mounted, steering wheel installed and all interior components finally in place.
22
September 9, 2018
My modeling club approved of the interior. At least they (unlike my wife) don't think I'm crazy. Not that they'd admit anyways.
23
September 22, 2018
Had just enough Semi-Gloss Black leftover in the can to spray the chassis.
24
September 22, 2018
Front end assembly in place and the engine has been mounted.
25
September 22, 2018
It was really fiddly trying to get the kingpins to stay in place during assembly.
26
September 23, 2018
Teasing the body colour here with the firewall, before I go in and paint some more of those details. It's going to be wonderfully horrendous!
27
September 30, 2018
The completed radiator assembly.
28
September 30, 2018
Rear suspension and exhaust have been installed. Waiting now for the body paint to finish curing before installing the glass.
29
October 6, 2018
The body coat doesn't have to be high-gloss because it's going to get roughed up and weathered before I'm finished.
30
October 7, 2018
Chassis, interior and body have come together. It was a bit of work to get them to come together but it's a good enough fit for what I need.
31
October 7, 2018
Interior looks better when viewed through the open window than when it was on its own.
32
December 17, 2018
Starting on the next kit for the project, a 1941 Ford Woody. Nice to finally build an engine that looks a little different.
33
December 17, 2018
Parts fit together snugly with little issue. Side note, this is my first engine that was entirely airbrushed.
34
December 17, 2018
The radiator was a bid fiddly to get into place. Trying to secure the hoses enough to hold in place while being loose enough to angle into position was frustrating until it all came together.
35
December 21, 2018
Should I get a set of white wall tires, are you gonna cruise a miracle mile?
36
December 29, 2018
Went with a tan and brown interior - the seats ended up with a nice slightly mottled pattern. Can't imagine driving with those tiny round pedals.
37
December 30, 2018
First attempt at a varnished woodgrain interior. A base of Flat Brown, covered with Dark Yellow, and a glaze of Clear Orange.
38
January 4, 2019
Interior panels painted and ready for assembly.
39
January 4, 2019
It doesn't look like much from the outside at this point but the interior came out nicely. There's an entire outer shell that fits over this interior cabin.
40
January 4, 2019
There was a bit of warping to the panels, particularly up front that made for a challenge to put these panels together.
41
January 4, 2019
A view of the interior. I found some good references to help inspire the painting.
42
January 13, 2019
The underbody on this kit feels remarkably more complex after so many NASCAR builds. A little tricky getting some of it to line up well with age and warping, but it pulled together.
43
January 28, 2019
Base coats have been applied but will need some sanding and polish as well as touching up in spots. The handles and hinges will also need painting before moving on.
44
February 8, 2019
Once the cab goes on, it's harder to see the details inside. Isn't that always the way? Doesn't matter, I know it's there. The outer cab wasn't quite sitting right when I took this photo, which is why the windows look off.
45
February 8, 2019
That rear driver's side wheel is a little crooked, but given that it's going into the Chassis and Crossbows diorama, it's not a big deal.
46
February 8, 2019
I considered going for a higher gloss finish, but this thing is going to get all dirty anyways.
47
February 8, 2019
I only installed the front windshield. It went in nice and clean, but I wasn't convinced that the hand-cut side windows would do the Woody any favours. They'd get in the way of combat, too.
48
May 5, 2019
Another engine build for another post-apocalyptic death machine. The components were really rough and don't assemble as well.
49
August 11, 2019
Time to start building a 1953 Corvette to add to the mayhem. Gotta love white wall tires and the Blue Flame Special.
50
August 18, 2019
The frame has some significant warping due to age. The CA glue is really earning its keep here. With a little weight applied, I should be able to get all four wheels on the ground together.
51
May 25, 2019
Not my best interior, but it's a really old kit and still a work in progress. Still have to install the front seats and the roll bar and permanently affix that steering column.
52
June 1, 2019
Seats installed and the roll bar has been mounted. Interior is finished.
53
June 10, 2019
Body is primed and the first coat of paint is drying. Meanwhile, the front end is coming along nicely.
54
June 25, 2019
The paint isn't perfect but it will serve. It's not the blue I had planned on, but Tamiya's Racing Blue really pops.
55
June 28, 2019
The orange peel is pretty visible in this shot. It doesn't seem so noticeable in person, but again, the weathering will mask some of this so I can continue practicing before I try a "show car".
56
June 28, 2019
Not my best work. I need to work on my painting window trim. The hood wouldn't quite stay closed either so I had to glue it shut. But it will be a nice addition to the Chassis and Crossbows project.
57
October 4, 2019
The decal on the plate was pretty fragile, and I lost part of the "California" - but it still works well enough once trimmed down.
58
October 4, 2019
The hood emblem turned out well, painted with an X-acto knife. The chrome also helps hide some of the clearcoat that pooled near the bottom.
59
October 4, 2019
Happy with the interior. Scraping away the paint in the creases gave me the embroidery look I was aiming for.
60
October 4, 2019
Looks better without the top. Overall pretty pleased with the end results. Will be a shame to damage it up for the Chassis & Crossbows set.

Коментарі

1 5 August 2018, 23:00

Rex
Are you really going to include rusted Aluminum wheels in your dio?

23 August 2018, 21:41

Brad Furminger
Rusted wheels, dented panels, worn paint, makeshift armour, bullet holes, protruding crossbow bolts... the works.

23 August 2018, 22:12

Bart Goesaert
think it is the first time I see aluminium rust... it can get a white sheen to it... that is possible, and maybe collect some rust-dust coming from the brakes

24 August 2018, 09:02

Brad Furminger
I'm using XF-16 aluminum paint but the intent is meant to create the look of chrome plating that has chipped and allowed the elements through to the metal beneath. The rust then stains the rest of the wheels. The wheels will be gummed up with enough additional weathering and dirt that it didn't feel worth the effort to try using bare metal foil. Sorry if I offended anybody's sense of chemistry.

24 August 2018, 10:44

Rex
Not offended,,,,,it is just that anyone that has ever owned Crager's wheels will spot that in a millisecond.
And I really "only asked", because I read sooo much that weathering and wear is put on models for Realism. In US salvage yards, the Aluminum wheels are the first thing removed for resale, because they don't (can't) rust.

24 August 2018, 16:43

Brad Furminger
All good and I get where you're coming from. I tend to go for a look I like over true realism. Hopefully the end piece captures the feel and tone I want. Cheers.

24 August 2018, 17:08

Rex
I'm sure it will work, too. The result should look cool, "Mad Max" type of dios are rare enough that you should get a lot of interest from your viewers.

24 August 2018, 18:00

Brad Furminger
Picked up a few more kits to add to this project over the weekend. Also got a couple boxes of spare parts that should serve well as scratch-build material for adapting these kits to fit the theme.

30 September 2018, 18:35

Bob Hall
That's Looking Awesome ! I build nothing but Cars and Trucks and have TONS of left over parts and stuff, Let me know if there's anything you need, I might just have it !

7 October 2018, 21:31

Brad Furminger
Thanks, Robert. I'll keep that in mind.

7 October 2018, 22:28

Chris Greathouse
Woody looking great!

4 January 2019, 21:56

Peter Hardy
Holy snap Brad-man! How much have you improved!!!!!!!! That's looking very nice mate. Woody looks very good. Are you going to put any Aussie cars in? Hard top Falcon and a couple of Monaros for realism??

4 January 2019, 23:09

Brad Furminger
Thanks Chris, Peter. If I can find a Falcon or Monaro locally I will for sure. Getting something shipped into Canada from outside usually costs a small fortune.

4 January 2019, 23:21

Brad Furminger
Finished off the Woody. For now. I'm still putting together the plans for turning this group into Mad Max worthy battlecraft. Time to start a new kit.

8 February 2019, 22:56

Chris Greathouse
Woody came out great, great job on the interior 🙂

8 February 2019, 23:45

Brad Furminger
Time to start a new death machine. This next one will be based off the 1967 Pontiac GTO.

5 May 2019, 12:54

Peter Hardy
The paint isn't bad Brad. Could use some clear methinks?

26 June 2019, 06:17

Brad Furminger
It's got a couple coats of clear on it, but she orange peeled a bit. I haven't gotten the hang of wet sanding yet. By the time I Mad Max this, it won't be so noticeable.

26 June 2019, 23:09

Brad Furminger
Finished off the GTO aside from the weathering and damage. Of course you know what this means... another NASCAR on the horizon!

28 June 2019, 16:24

Brad Furminger
With the latest NASCAR done it's time to start on the 53 Vette.

11 August 2019, 16:05

Munkyslut
Good start.........The Blue Flame is alight!

18 August 2019, 11:18

Brad Furminger
It's been too long since I've posted here. But the Vette is done, and now time to move on to another NASCAR build. Yep. Another one.

4 October 2019, 22:49

Bob Hall
That sure is a beauty of a 53 'Vette ! Great Work Brad !

4 October 2019, 22:53

Munkyslut
Vette looks freaking awesome! That's a very pretty car, you done good 😉

4 October 2019, 22:56

Christian W
On my point of view, the Bel Air is the best outcome (this interior is delicious!), followed by the Woody (Fantastic interior as well), the GTO and the Corvette is my last place.
Why? Take a closer look to pic #58: there are a lot of seams / parting lines around the headlights and to the front grille. Further on the red paint between the front wind shield and body - to much red color in this area - it have to be body color (pic #60). That "ruins" the rest of the good looking C1.

The Bel Air is way better - you can do it. It's the little details, which cathces the eye and the macro doesn't forgive anything.

30 May 2022, 10:00

Album info

A collection of vehicles for a post-apocalyptic wasteland. It's also a throwback to my childhood. Growing up with Mad Max and The Road Warrior we used to add battle damage to the model kits we built. I will likely add a fair amount of scratch-built armaments out of the scraps left over from previous builds.

Chassis and Crossbows

60 зображення

1:25

Відкладено

1:25 1962 Chevrolet Bel Air 409 (AMT/ERTL 8716)

1:24 '53 Corvette Roadster (Revell 85-2164)

1:25 '41 Ford Woody Stock (AMT/ERTL 30051)

1953 Chevrolet Corvette C1

Private
VETTE
Грудень 1953 - California

Усі альбоми

Переглянути всі альбоми »