P-51D Mustang
![Album image #1 Album image #1](/albums/img/3/9/8/520398-21096-87-720.jpg)
very nice detail in the sprues
![Album image #2 Album image #2](/albums/img/3/9/9/520399-21096-13-720.jpg)
excellent really, in my opinion
![Album image #3 Album image #3](/albums/img/4/0/0/520400-21096-33-720.jpg)
![Album image #4 Album image #4](/albums/img/4/0/1/520401-21096-26-720.jpg)
test fit of the closed rear wheel bay
![Album image #5 Album image #5](/albums/img/4/0/2/520402-21096-82-720.jpg)
four canopies for 2 kits. i wish i could get that in all kits. and thin almost as paper.... can not be better!
![Album image #6 Album image #6](/albums/img/4/0/3/520403-21096-50-720.jpg)
one will be "inflight" for the "flying circus" project, the other standing on the ground, alone
![Album image #7 Album image #7](/albums/img/4/0/4/520404-21096-62-720.jpg)
i had to cut the covers of the rear wheel bay to make it inflight. test fit, not glued yet
![Album image #8 Album image #8](/albums/img/4/0/6/520406-21096-12-720.jpg)
basic interior doeas not even have instrument pannel. only a basic seat... i will add some details.
![Album image #9 Album image #9](/albums/img/4/0/7/520407-21096-73-720.jpg)
first details
![Album image #10 Album image #10](/albums/img/4/1/0/520410-21096-38-720.jpg)
at the end, it will be almost impossible to see it... but it is fun
![Album image #11 Album image #11](/albums/img/4/1/1/520411-21096-25-720.jpg)
some "instruments"
![Album image #12 Album image #12](/albums/img/4/1/2/520412-21096-82-720.jpg)
![Album image #13 Album image #13](/albums/img/4/1/3/520413-21096-78-720.jpg)
maybe too much weathering....
![Album image #14 Album image #14](/albums/img/4/1/4/520414-21096-37-720.jpg)
air hoses
![Album image #15 Album image #15](/albums/img/4/1/5/520415-21096-35-720.jpg)
side instruments
![Album image #16 Album image #16](/albums/img/4/1/7/520417-21096-83-720.jpg)
lets start on new pilot seats..... kit ones are nice, but too simple
![Album image #17 Album image #17](/albums/img/4/1/8/520418-21096-92-720.jpg)
cover with very thin copper....
![Album image #18 Album image #18](/albums/img/4/1/9/520419-21096-93-720.jpg)
starting to take shape
![Album image #19 Album image #19](/albums/img/4/2/0/520420-21096-85-720.jpg)
beginning to look like a pilot seat?
![Album image #20 Album image #20](/albums/img/4/2/1/520421-21096-81-720.jpg)
![Album image #21 Album image #21](/albums/img/4/2/2/520422-21096-16-720.jpg)
ready for paint
![Album image #22 Album image #22](/albums/img/4/2/3/520423-21096-68-720.jpg)
![Album image #23 Album image #23](/albums/img/4/2/5/520425-21096-50-720.jpg)
seat belts, to be folded later
![Album image #24 Album image #24](/albums/img/4/2/6/520426-21096-98-720.jpg)
![Album image #25 Album image #25](/albums/img/4/2/7/520427-21096-72-720.jpg)
![Album image #26 Album image #26](/albums/img/4/2/8/520428-21096-83-720.jpg)
inflight will be closed, the other need open cockpit... nerves wrecking moments, but sliced it in two without breaking it....
![Album image #27 Album image #27](/albums/img/4/2/9/520429-21096-45-720.jpg)
some aluminium to make instrument pannels
![Album image #28 Album image #28](/albums/img/4/3/0/520430-21096-24-720.jpg)
maybe is should have drilled them as i did with the P38
![Album image #29 Album image #29](/albums/img/4/3/2/520432-21096-40-720.jpg)
for the wooden floor.... painted aluminium
![Album image #30 Album image #30](/albums/img/4/3/3/520433-21096-99-720.jpg)
joystick... crude maybe but....
![Album image #31 Album image #31](/albums/img/4/3/4/520434-21096-84-720.jpg)
![Album image #32 Album image #32](/albums/img/4/3/6/520436-21096-11-720.jpg)
![Album image #33 Album image #33](/albums/img/4/3/7/520437-21096-58-720.jpg)
metal plate added to back of seat
![Album image #34 Album image #34](/albums/img/4/3/8/520438-21096-96-720.jpg)
some wires on the radio
![Album image #35 Album image #35](/albums/img/4/4/0/520440-21096-89-720.jpg)
![Album image #36 Album image #36](/albums/img/4/4/2/520442-21096-62-720.jpg)
time to close the fuselage....
![Album image #37 Album image #37](/albums/img/4/4/3/520443-21096-45-720.jpg)
some details still visible
![Album image #38 Album image #38](/albums/img/4/4/4/520444-21096-53-720.jpg)
added some wires to the wheel bay. and some small pannels
![Album image #39 Album image #39](/albums/img/4/4/5/520445-21096-77-720.jpg)
![Album image #40 Album image #40](/albums/img/4/4/6/520446-21096-54-720.jpg)
do you see somethign wrong? i use the fuselage with closed rear wheel bay with the wings with open wheel bay... DOH!!!
![Album image #41 Album image #41](/albums/img/4/5/0/520450-21096-25-720.jpg)
ok, now this one is solved. all closed. fly away 🙂
![Album image #42 Album image #42](/albums/img/4/5/1/520451-21096-38-720.jpg)
original plastic part is nice, but it will not even survive the build.... lest get some metal in there....
![Album image #43 Album image #43](/albums/img/4/5/2/520452-21096-61-720.jpg)
almost forgot the visor for the pitot... what was i thinking?
![Album image #44 Album image #44](/albums/img/4/5/4/520454-21096-54-720.jpg)
it shoudl be ok
![Album image #45 Album image #45](/albums/img/4/5/5/520455-21096-85-720.jpg)
of course, NMF, of course, Alclad, so black alclad base it is....
![Album image #46 Album image #46](/albums/img/4/5/6/520456-21096-75-720.jpg)
grrrrrr. imperfections that will be to visible later..... #%$#@#$ what was i thinking?
![Album image #47 Album image #47](/albums/img/4/5/8/520458-21096-65-720.jpg)
canopies dipped in future.
![Album image #48 Album image #48](/albums/img/4/6/0/520460-21096-17-720.jpg)
![Album image #49 Album image #49](/albums/img/4/6/1/520461-21096-42-720.jpg)
black base revealed some imperfections... sanding and more sanding....
![Album image #50 Album image #50](/albums/img/4/6/2/520462-21096-56-720.jpg)
open cockpit, trying to protect the interior with tamiya masking.....
![Album image #51 Album image #51](/albums/img/4/6/3/520463-21096-16-720.jpg)
closed cockpit, easier but should be masked too
![Album image #52 Album image #52](/albums/img/4/6/4/520464-21096-28-720.jpg)
![Album image #53 Album image #53](/albums/img/4/6/5/520465-21096-46-720.jpg)
repeat with me, plastic shoudl be shinny before even you use black base... it will save you from sanding the paint later.....doh!
![Album image #54 Album image #54](/albums/img/4/6/6/520466-21096-81-720.jpg)
and more polishing done here....
![Album image #55 Album image #55](/albums/img/4/6/7/520467-21096-88-720.jpg)
not bad from this angle... of course Petie 2 🙂
![Album image #56 Album image #56](/albums/img/4/6/8/520468-21096-98-720.jpg)
![Album image #57 Album image #57](/albums/img/4/6/9/520469-21096-71-720.jpg)
hummm.... this side is not that good....
![Album image #58 Album image #58](/albums/img/4/7/2/520472-21096-89-720.jpg)
and there is a problem... i wanted the petie 2 in the inflight one.... and i have done it the one with open wheel bays, what do i do now, remove the paint and start over???
![Album image #59 Album image #59](/albums/img/7/8/2/1224782-21096-99-720.jpg)
repainted the alclad in the wrong one and started over with masking on the right one....ready for the blue again
![Album image #60 Album image #60](/albums/img/7/8/3/1224783-21096-30-720.jpg)
one side, is what I want
![Album image #61 Album image #61](/albums/img/7/8/9/1224789-21096-67-720.jpg)
The other, was good, but Alckad was a bit damaged (masking tape probably) and repainting took the nice sharp edge of the blue...grrrrrr
![Album image #62 Album image #62](/albums/img/7/8/4/1224784-21096-49-720.jpg)
Added bit of Tamiya thin glue since part was a bit loose,Alclad needs to be corrected
![Album image #63 Album image #63](/albums/img/1/0/4/1267104-21096-14-720.jpg)
decals on, protected with Future. and Flory models panel wash on
![Album image #64 Album image #64](/albums/img/1/0/3/1267103-21096-34-720.jpg)
Removed excess, new coat with Future
![Album image #65 Album image #65](/albums/img/1/0/5/1267105-21096-99-720.jpg)
Added thin layers of Future to protect decals
that decal was not easy to place... because it is composed two decals on top of the other.... the colors, and then the balck part of the cartoon, had to be place on top, unless aligned perfectly, it will not look good. took some time to place it. the same for the "petie 2nd" also two decals. one white, one transparent with color borders....
that decal was not easy to place... because it is composed two decals on top of the other.... the colors, and then the balck part of the cartoon, had to be place on top, unless aligned perfectly, it will not look good. took some time to place it. the same for the "petie 2nd" also two decals. one white, one transparent with color borders....
![Album image #66 Album image #66](/albums/img/1/0/6/1267106-21096-48-720.jpg)
![Album image #67 Album image #67](/albums/img/1/0/7/1267107-21096-55-720.jpg)
![Album image #68 Album image #68](/albums/img/2/2/6/1288226-21096-56-720.jpg)
decal solutions (micro set/sol and Mr mart Setter, who is the guilty one? no idea) created some fogging in the layer of future.....
![Album image #69 Album image #69](/albums/img/2/2/7/1288227-21096-39-720.jpg)
but another layer of future resolved the issue.... that was a bit scary.
![Album image #70 Album image #70](/albums/img/2/2/8/1288228-21096-78-720.jpg)
some decals were not easy. The blue one right under the propeller (not the propeller itself) was complicated to set in place... but they look fantastic. in the tail, i choose to paint blue and use the yellow decal, instead of the blue decal with the omega on it. it looks good, i think
![Album image #71 Album image #71](/albums/img/2/2/9/1288229-21096-36-720.jpg)
cockpit on
![Album image #72 Album image #72](/albums/img/2/3/0/1288230-21096-21-720.jpg)
decals again got me crazy... you have to decals in each blade, one has the yellow/white, and then you have to place the second with the red on the exact spot.... fiddly to say the least.... i see that in the other boxing, they did the decals as just one, why they did as two in this one.... i can not begin to imagine
![Album image #73 Album image #73](/albums/img/2/3/2/1288232-21096-69-720.jpg)
there you can see the two decals that have to be placed on top of each other.... there is even a third one, only white (bottom right) that is not even mentioned in the instructions.... maybe to be placed underneath? yellow decal looks has good coverage, so i certainly did not even think about placing the white underneath
![Album image #74 Album image #74](/albums/img/2/1/0/1293210-21096-26-720.jpg)
and this one is completed
![Album image #75 Album image #75](/albums/img/2/1/1/1293211-21096-78-720.jpg)
added fuel line from external tank to the wing,and a bit of oil streaking
![Album image #76 Album image #76](/albums/img/2/1/2/1293212-21096-29-720.jpg)
the decal with the thin line in the canopy was some fun, but it looks great in the picture
![Album image #77 Album image #77](/albums/img/2/1/3/1293213-21096-89-720.jpg)
cockpit open so details can be seen
![Album image #78 Album image #78](/albums/img/2/1/4/1293214-21096-92-720.jpg)
![Album image #79 Album image #79](/albums/img/2/1/5/1293215-21096-55-720.jpg)
![Album image #80 Album image #80](/albums/img/2/1/6/1293216-21096-16-720.jpg)
and this one is also finished
![Album image #81 Album image #81](/albums/img/2/1/7/1293217-21096-62-720.jpg)
![Album image #82 Album image #82](/albums/img/2/1/8/1293218-21096-72-720.jpg)
added some details in the wheel wells. the hydraulic thing to open/close was a last minute addition just two very thin steel tubes inside each other.
![Album image #83 Album image #83](/albums/img/2/2/0/1293220-21096-14-720.jpg)
that canopy is so thin you can actually see details inside. and it is not vacuform. i love it.
looks like orange peel in this picture, but it is magnified so many times. pretty smooth to the naked eye
looks like orange peel in this picture, but it is magnified so many times. pretty smooth to the naked eye
![Album image #84 Album image #84](/albums/img/2/2/1/1293221-21096-93-720.jpg)
Коментарі
35 1 October 2018, 19:28
![](/profiles/img/21096-573-s.jpg)
interior is tamiya acrylics, outside is Alclad airframe aluminium. i should have polished more the plastic, and it would have been even better.
1 October 2018, 21:40
![](/profiles/img/21096-573-s.jpg)
not easy, but possible.... like doing the rigging of certain ship i have just seen... with flags and all, for sure not easy either 😉
never used Mr Paint, but i will have it in mind, Alclad does give good result, but it is not exactly healthy stuff 🙁
1 October 2018, 22:01
![](/profiles/img/21096-573-s.jpg)
Well, there is 3 in this project 😉 sea gladiator, I-15 Chato and Nieuport, the last one is not WWII, but I was asked to add some biplanes to the project 😛
1 October 2018, 22:19
![](/profiles/img/21096-573-s.jpg)
Petie 2 twice was not an option back then, since I had only decals for one. Today I could maybe print a copy, but trimming it would be fun.... so the decision was taken and repainted with Alclad, so here we go again.....
13 May 2022, 20:53
![](/profiles/img/73194-710-s.jpg)
I like very much how you built all the cockpit elements. Seats are great!
13 May 2022, 22:26
![](/profiles/img/44164-321-s.jpg)
Great work so far! 👍
I know what you mean about the thinness of the canopy. I've never seen anything quite like it before.
14 May 2022, 07:58
![](/profiles/img/21096-573-s.jpg)
Thanks both. I wish only that Eduardo would have released them a bit sooner, I paid them quite expensive via evilbay, and then Eduard out the same kits in the market for a very foos price 😛 I hope to see more soon
14 May 2022, 09:50
![](/profiles/img/21096-573-s.jpg)
thanks Alberto and Neuling. the two P51 are completed. one for the flying circus project, the other may end up in its own small vignette.
the project is now starting to take shape. 6 items completed. 3 others completed but not be used on the project (like the second P-51D of this album)
30 August 2022, 10:08
![](/profiles/img/21096-573-s.jpg)
Martin, I never really answered your suggestion.... actually it was a good idea, but unfortunately it was possible. i only have one set of decals for the Petie 2nd. I have 3 P-51D boxes but the other two have other decals.
30 August 2022, 10:13
![](/profiles/img/21096-573-s.jpg)
thanks. yes, i have a special project for the "flying" ones 🙂 (several albums attached to this project)
this kit actually deserves good work. really nice detail, specially considering the size.
1 September 2022, 09:24
Album info
since the box has two, one goes to the "flying circus" project and the other one will go alone.
the kit is simply amazing, really thin plastic (as it should be in this scale). amazing details and perfect fit. the canopy is thinner than anything i have seen without being vacuform.... a 10/10 to Platz for it.