Bergepanzer Tiger I
![Album image #1 Album image #1](/albums/img/7/7/1/835771-72213-20-720.jpg)
![Album image #2 Album image #2](/albums/img/7/7/2/835772-72213-11-720.jpg)
![Album image #3 Album image #3](/albums/img/8/1/6/835816-72213-37-720.jpg)
The kit comes with two complete sets of tools and lots of extras; one set has the clamps attached, the other allows you to use the provided Photo-etch ones. I chose the styrene for this project.
![Album image #4 Album image #4](/albums/img/8/1/5/835815-72213-94-720.jpg)
![Album image #5 Album image #5](/albums/img/8/1/4/835814-72213-33-720.jpg)
![Album image #6 Album image #6](/albums/img/8/1/3/835813-72213-82-720.jpg)
![Album image #7 Album image #7](/albums/img/8/1/2/835812-72213-23-720.jpg)
![Album image #8 Album image #8](/albums/img/8/1/0/835810-72213-89-720.jpg)
![Album image #9 Album image #9](/albums/img/7/9/7/835797-72213-30-720.jpg)
![Album image #10 Album image #10](/albums/img/8/0/1/835801-72213-41-720.jpg)
![Album image #11 Album image #11](/albums/img/8/0/5/835805-72213-30-720.jpg)
![Album image #12 Album image #12](/albums/img/8/0/9/835809-72213-48-720.jpg)
![Album image #13 Album image #13](/albums/img/7/9/1/835791-72213-88-720.jpg)
When painting I work in sub-assemblies, often 50 or more mounted to alligator clips; also the wheels are done separately. This allows me to weather more fully and easily although it adds double to the amount of time needed for completion.
![Album image #14 Album image #14](/albums/img/7/9/2/835792-72213-70-720.jpg)
The kit comes with copper stranded cable but they don't tell you how long to cut it; I made these a bit too long obviously.
![Album image #15 Album image #15](/albums/img/7/9/3/835793-72213-26-720.jpg)
![Album image #16 Album image #16](/albums/img/7/9/4/835794-72213-98-720.jpg)
![Album image #17 Album image #17](/albums/img/7/9/5/835795-72213-48-720.jpg)
![Album image #18 Album image #18](/albums/img/7/9/6/835796-72213-82-720.jpg)
![Album image #19 Album image #19](/albums/img/7/8/7/835787-72213-23-720.jpg)
![Album image #20 Album image #20](/albums/img/7/8/8/835788-72213-55-720.jpg)
![Album image #21 Album image #21](/albums/img/7/8/9/835789-72213-63-720.jpg)
The tracks are styrene and from the RFM kit, they are very beautifully detailed.
![Album image #22 Album image #22](/albums/img/7/9/0/835790-72213-62-720.jpg)
The cable does not look as realistic to me; next time I'll try some rigging rope for ship models.
![Album image #23 Album image #23](/albums/img/7/8/3/835783-72213-22-720.jpg)
I used Friul Tiger I tracks and the excellent Wheel Mask by Quickwheel for the RFM Tiger I it was a perfect fit.
I painted the entire wheel with rattle can black satin then, after dry, airbrushed two light coats of Tamiya Dark Yellow. When this was dry and before removing, I sponge brush weathered and added rust flakes to the metal.
A final coat of Humbrol spray matte acrylic to seal it and voila!
I painted the entire wheel with rattle can black satin then, after dry, airbrushed two light coats of Tamiya Dark Yellow. When this was dry and before removing, I sponge brush weathered and added rust flakes to the metal.
A final coat of Humbrol spray matte acrylic to seal it and voila!
![Album image #24 Album image #24](/albums/img/7/8/4/835784-72213-57-720.jpg)
This cable, seen attached to the side of nearly every Tiger I, was used to aid in changing from Transport to Normal tracks. The Tiger I was a little wide for the German railways and had to travel with a narrower track and the removal of the outer roadwheels to clear bridges and oncoming trains.
![Album image #25 Album image #25](/albums/img/7/8/5/835785-72213-73-720.jpg)
![Album image #26 Album image #26](/albums/img/7/8/6/835786-72213-71-720.jpg)
The kit comes with numerous hatches for the loader but only one each for the driver and assistant driver/radio operator.
![Album image #27 Album image #27](/albums/img/7/7/6/835776-72213-64-720.jpg)
![Album image #28 Album image #28](/albums/img/7/7/7/835777-72213-89-720.jpg)
![Album image #29 Album image #29](/albums/img/7/7/8/835778-72213-75-720.jpg)
I declined to beat up the sheet metal exhaust covers on this kit.
![Album image #30 Album image #30](/albums/img/7/7/9/835779-72213-94-720.jpg)
The basket for the tool kit is Photo-etch and is a little tight on the tool kit so you'll need to scrape a little off the bottom rear corners.
![Album image #31 Album image #31](/albums/img/7/7/3/835773-72213-43-720.jpg)
I weathered the Friuls after assembly by first soaking in Muriatic acid for 10 minutes then soaking in cold water to neutralize the acid. It leaves a very dull gray finish that is perfect for paints and stains.
One coat of AK Interactive Enamel Track Wash and a little AK dust pigment sprinkled on.
One coat of AK Interactive Enamel Track Wash and a little AK dust pigment sprinkled on.
![Album image #32 Album image #32](/albums/img/7/7/4/835774-72213-24-720.jpg)
![Album image #33 Album image #33](/albums/img/7/7/5/835775-72213-94-720.jpg)
Коментарі
7 1 September 2020, 16:04
![](/profiles/img/72213-448-s.jpg)
I love Rye Field Models; just built this kit from my stash and it was the most detailed Tiger I've handled, even better than the Trumpeter and AFV kits and that's saying a lot.
1 September 2020, 20:57
![](/profiles/img/35371-240-s.jpg)
That is a great level of mastery in chipping on that Berg..very realistic looking..you can tell she's been around and seen a lot of action In battle
1 September 2020, 22:31
![](/profiles/img/72213-448-s.jpg)
Thank you; I had read an article by a German WW2 Tank crewman who had been in combat continuously for 29 months! It spoke to me of the enormous wear and tear on their equipment.
2 September 2020, 20:52
Album info
1/35 Bergepanzer Tiger I straight oob with Friul tracks