My HE 112B in progress
Коментарі
34 28 October 2021, 07:20
Robert Podkoński
Another brave man who tackles a RSmodel kit. Keep my fingers crossed for your perseverance... And I will follow with pleasure, of course 😉
Another brave man who tackles a RSmodel kit. Keep my fingers crossed for your perseverance... And I will follow with pleasure, of course 😉
28 October 2021, 17:49
Moreno Baruffini
Many thanks mates!!!!
@Robert:Yes...Today, I have been working on the two engine covers...Very bad slots...But I usually work on vintage kits, so I should be ready!
Many thanks mates!!!!
@Robert:Yes...Today, I have been working on the two engine covers...Very bad slots...But I usually work on vintage kits, so I should be ready!
28 October 2021, 18:03
Moreno Baruffini
Well mates...I have to be sincere: although the instructions are a bit vague, part 34 is missing on the sprue and you have to sand almost every piece... I'm really ENJOYING this build: the kit is simply and the parts are well engraved, and I really like the line of this plane. I'll try to do a good job on the camo!
Well mates...I have to be sincere: although the instructions are a bit vague, part 34 is missing on the sprue and you have to sand almost every piece... I'm really ENJOYING this build: the kit is simply and the parts are well engraved, and I really like the line of this plane. I'll try to do a good job on the camo!
1 November 2021, 09:38
Robert Podkoński
The most important fact is that you are really enjoying this build, Moreno 😉 Keep calm and carry on!
The most important fact is that you are really enjoying this build, Moreno 😉 Keep calm and carry on!
1 November 2021, 15:16
Moreno Baruffini
Dear Robert, I just had funny moments trying to fix the wings to the fuselage...These kits really need brave men! 😉
Dear Robert, I just had funny moments trying to fix the wings to the fuselage...These kits really need brave men! 😉
7 November 2021, 14:40
Moreno Baruffini
Time to resume this project: in the past week I worked filling and sanding...Not finish yet!
Time to resume this project: in the past week I worked filling and sanding...Not finish yet!
26 December 2021, 19:03
Moreno Baruffini
Still working on this project! (Don't worry, I'll try to finish all the open projects).
A bit disappointed by the AK real colours: they are very difficult to manage - they dry very fast and tend to clogging my airbrush - and the RLM 63 seems to me too green...For sure I have to practise more
Still working on this project! (Don't worry, I'll try to finish all the open projects).
A bit disappointed by the AK real colours: they are very difficult to manage - they dry very fast and tend to clogging my airbrush - and the RLM 63 seems to me too green...For sure I have to practise more
14 May 2022, 16:31
Moreno Baruffini
Masking finished!
Waiting the retarder to arrive, and I'll start apply the colours for the camo
Masking finished!
Waiting the retarder to arrive, and I'll start apply the colours for the camo
18 May 2022, 13:13
Ben M
Nice work on a difficult project. Which retarder are you using? I used Ak paints on a tank because they came in conveniently premixed colors but I did find myself thinking I would have been better off mixing Tamiya and spraying. I did have problems with tip dry but I live in an extremely dry area.
Nice work on a difficult project. Which retarder are you using? I used Ak paints on a tank because they came in conveniently premixed colors but I did find myself thinking I would have been better off mixing Tamiya and spraying. I did have problems with tip dry but I live in an extremely dry area.
18 May 2022, 13:21
Moreno Baruffini
Hi Ben, thanks! I'm using the AK real colours kit for Luftwaffe pre war camos, I also experienced tip dry... I'll try the AK retarder.
...Here in northern Italy the climate should be quite wet, but we are facing a lack of rain in the last months... Climate change 🙁
Thanks for the following Lukasz!
Hi Ben, thanks! I'm using the AK real colours kit for Luftwaffe pre war camos, I also experienced tip dry... I'll try the AK retarder.
...Here in northern Italy the climate should be quite wet, but we are facing a lack of rain in the last months... Climate change 🙁
Thanks for the following Lukasz!
18 May 2022, 13:36
Moreno Baruffini
Thank you very much...Still on the shelf, but I have now everything to finish it 👍🏻
Thank you very much...Still on the shelf, but I have now everything to finish it 👍🏻
5 October 2022, 17:45
Cuajete
Looking so good so far, Moreno 👍.
Are you doing another Re.2001 from Supermodel?
Looking so good so far, Moreno 👍.
Are you doing another Re.2001 from Supermodel?
5 October 2022, 17:47
Moreno Baruffini
Ciao Cuajete, no, it's an old picture with the Reggiane that I've already finished.
Now I have the complete set from Sword, but it will have to wait🙂
Ciao Cuajete, no, it's an old picture with the Reggiane that I've already finished.
Now I have the complete set from Sword, but it will have to wait🙂
5 October 2022, 17:49
Cuajete
OK, Moreno. Remember that if you are not going to do the Sword one I will buy it for you 😉
OK, Moreno. Remember that if you are not going to do the Sword one I will buy it for you 😉
5 October 2022, 17:53
Moreno Baruffini
Dear mates, thanks to your interest, today I resumed this project.
I applied the green and the brown... Once dry, let's see how it worked! 🙂
Dear mates, thanks to your interest, today I resumed this project.
I applied the green and the brown... Once dry, let's see how it worked! 🙂
6 October 2022, 15:11
Moreno Baruffini
Thank you, mates!!!!
By the way, the day after I applied the camo, LF models launches the camouflage paint maks for the exact aircraft I'm doing...
Heinkel He 112B-0 Spain (LF Models M72112, 1:72)
🙂
Thank you, mates!!!!
By the way, the day after I applied the camo, LF models launches the camouflage paint maks for the exact aircraft I'm doing...
Heinkel He 112B-0 Spain (LF Models M72112, 1:72)
🙂
7 October 2022, 14:37
Moreno Baruffini
Here we are, all in all a good result with a home made masking, some flaws to be corrected.
Quite happy with the general result!
Here we are, all in all a good result with a home made masking, some flaws to be corrected.
Quite happy with the general result!
8 October 2022, 13:27
Moreno Baruffini
Yes! Today I worked a bit on the missing patches.
Anyway, still some work to do on the canopy, etc...
Yes! Today I worked a bit on the missing patches.
Anyway, still some work to do on the canopy, etc...
9 October 2022, 18:16
Moreno Baruffini
Thank you, gentlemen! I'm still working on the canopy and on some details, hope to start "decaling" in the following days!
Thank you, gentlemen! I'm still working on the canopy and on some details, hope to start "decaling" in the following days!
18 October 2022, 12:14
Moreno Baruffini
Thank you Lt.!!!!
...And sorry, still no news, I've started a secret project 😉 but the He will return soon on the bench!
Thank you Lt.!!!!
...And sorry, still no news, I've started a secret project 😉 but the He will return soon on the bench!
6 November 2022, 16:23
Moreno Baruffini
Back on the bench ☺️
You can find below why I didn't work on this model for a while 🙂
Back on the bench ☺️
You can find below why I didn't work on this model for a while 🙂
1 December 2022, 21:31