My SM 79 Sparviero in Spanish service in progress
The only two pictures of the aircraft
My plan is to realise the infrastructure for one engine as in this picture
I'll use one of these engines that I assembled more than ten years ago 🙂
I have also these resin engines, but I'll probably use the original Italeri pieces for the two engines with the nacas (in Italy the name was "Anello Magni")
Taking measurements...
An initial picture with all the aftermarkets 🙂
Working on the fuselage windows, using manual tools
Closing the lower windows; I will finish applying putty on the fuselage
Very happy because I found in my "spare box" a canopy, coming from the Pavla interior details pack. It will be very useful!
Very happy also because in the decals for my Cant Z506 there's a blue lighting 😉
I vacuumformed the upper part of the canopy...(better, I tried) 🙂
Almost ready to close.
(A very strong oil wash to highlight the inner part... maybe too dirt 😉)
(A very strong oil wash to highlight the inner part... maybe too dirt 😉)
Fuselage halves put together, all ok, bit it's necessary to sand a bit the inner cockpit
Sitting in the box with the Heinkel 🙂
A first test of the LF decals: they seem very good!
Ammo MIG Alclad black primer test...
Masking the "canopy" 🙂
Коментарі
12 16 December 2021, 10:16
Cuajete
Good job so far, Moreno! 👍
I have seen the updates by chance. Please, can you write in this part of comments to receive notifications of new updates? Thanks.
Good job so far, Moreno! 👍
I have seen the updates by chance. Please, can you write in this part of comments to receive notifications of new updates? Thanks.
2 January 2022, 19:43
Moreno Baruffini
Dear Cuajete, many thanks! I will follow your suggestions!
Tomorrow I'll post an update 🙂
Dear Cuajete, many thanks! I will follow your suggestions!
Tomorrow I'll post an update 🙂
2 January 2022, 21:36
Moreno Baruffini
Wings completed and glued to the rest of the plane 🙂 . Now I'm in the "filling sandig" phase...
Wings completed and glued to the rest of the plane 🙂 . Now I'm in the "filling sandig" phase...
4 January 2022, 16:53
Moreno Baruffini
Sorry folks but the Christmas break is finished and I have less time for models...I just added a couple of pictures with some intermediate works
Sorry folks but the Christmas break is finished and I have less time for models...I just added a couple of pictures with some intermediate works
11 January 2022, 18:39
Cuajete
Don't worry, Moreno... When you resume your projects we will know if you write on these lines 😉
Don't worry, Moreno... When you resume your projects we will know if you write on these lines 😉
11 January 2022, 19:37
Moreno Baruffini
Sanding and filling finished and a first night test of the Ammo MIG black primer... Very good product but very very smelling...Mask needed!
Sanding and filling finished and a first night test of the Ammo MIG black primer... Very good product but very very smelling...Mask needed!
17 January 2022, 21:36
Moreno Baruffini
A short update: I applied the aluminium coat. Despite the picture seems ok, I probably made some errors applying the primer and the finish do not satisfies me... Anyway, I'll try to finish the model touching up some parts.
A short update: I applied the aluminium coat. Despite the picture seems ok, I probably made some errors applying the primer and the finish do not satisfies me... Anyway, I'll try to finish the model touching up some parts.
30 January 2022, 15:48
Album info
Here we are with some pictures of my projects. I'll try to post interesting pics about interesting steps!