Y-Wing Violet Squadron - Bandai 1/72
![Album image #1 Album image #1](/albums/img/5/2/8/1197528-10003-81-720.jpg)
Some PE parts from the Greenstrawberry set represent the center and side consoles. They will be back-lighted with LEDs to show off the cockpit. In the movie you'll see a bunch of very prominent hoses running through the cockpit. They are not included in the kit so I'll try to make them from an old guitar string.
![Album image #2 Album image #2](/albums/img/5/2/9/1197529-10003-20-720.jpg)
A first light test for the center console. You can also already see two LEDs in front of the cockpit hub. These will later go to the sides and light up the left and right side consoles.
![Album image #3 Album image #3](/albums/img/7/7/1/1200771-10003-52-720.jpg)
The back wall of the cockpit has no clear part so this was added from some clear plastic sheet that comes with the Greenstrawberry set. I had also purchased their pre-cut masks which helped a lot to prepare the canopy parts from the outside as well as from the inside for the paint job. After that some PE detail was added with a home made pick-and-place tool: a toothpick and some UHU patafix.
![Album image #4 Album image #4](/albums/img/7/7/3/1200773-10003-23-720.jpg)
I deviated from the instructions and mounted the fuselage to the cockpit already now. The reason is the wiring that runs through the fuselage. The cockpit tub was painted black to avoid any light leakage.
![Album image #5 Album image #5](/albums/img/7/7/2/1200772-10003-80-720.jpg)
![Album image #6 Album image #6](/albums/img/7/7/4/1200774-10003-29-720.jpg)
The lights are still working - now the left and right consoles are lit, too.
![Album image #7 Album image #7](/albums/img/8/7/5/1205875-10003-93-720.jpg)
The engines pods are another focal point of the PE set.
![Album image #8 Album image #8](/albums/img/8/7/6/1205876-10003-16-720.jpg)
All main components have been primed with Vallejo Model Air 71097 "Gray Primer". Some spots, especially on any edges in the direction of flight are dabbed with Rvell Color Stop which will be peeled off once the light grey base color has been sprayed on. The latter is a 50/50 mix of Lifecolor Light Gull Grey anf Vallejo White. I love those drop bottle spare jars to store self-mixed shades. Mine come from MiG. The one-piece canopy is only there to protect the cockpit from overspray. The finished model will sport the opened canopy option.
![Album image #9 Album image #9](/albums/img/1/2/7/1206127-10003-71-720.jpg)
The main paint job is done. The violet is Vallejo Model Color 70.960. Here and there you see the chipping effects where I removed the Revell Color Stop and the gray primer shows through.
![Album image #10 Album image #10](/albums/img/0/1/2/1210012-10003-91-720.jpg)
All the main parts have been weathered with different oil washes. First a home-brewed grey wash over all surfaces, followed by two further shades in the form of "oilbrushers". This time only applied on selected areas and structures.
![Album image #11 Album image #11](/albums/img/5/5/2/1227552-10003-57-720.jpg)
Some more weathering was applied to the engine pods. Of course, being part of a sci-fi spaceship it's clear that these are not jet engines in the common way. Still, the weathering was applied in a similar fashion as one would perhaps weather an earthly fighter jet's engine. Doesn't look wrong to me...
![Album image #12 Album image #12](/albums/img/5/5/3/1227553-10003-32-720.jpg)
Just when you think all the big parts are more or less done you come to realize that it's far from over - the kit comes with a multitude of pipes and hoses that need to be painted, weathered and connected with the fuselage. I decided to work in three shifts. Otherwise it would probably have ended in chaos - if I had removed all small parts at once from the sprues.
Here the first batch of pipes is already in place and the second batch awaits installing.
Here the first batch of pipes is already in place and the second batch awaits installing.
![Album image #13 Album image #13](/albums/img/4/2/9/1228429-10003-63-720.jpg)
Some more pipes have been added, as well as one of the engine pods. The other engine will be displayed with the round front cover removed. Therefore some more detail painting needs to be done to show off the engine's interior detail. You can see it in the background, already masked for a first airbrush job.
![Album image #14 Album image #14](/albums/img/7/1/4/1232714-10003-68-720.jpg)
Almost there - the yellow ladder and work platform come from the Green Strawberry PE-set and will later be part of my brother's diorama. The only thing still missing are - some more hoses. This time inside the cockpit and not included in the kit. A small diameter guitar string will be used for them.
![Album image #15 Album image #15](/albums/img/7/5/5/1232755-10003-43-720.jpg)
Here there are - cockpit hoses made out of a guitar string. Now let's close the cockpit up again.
![Album image #16 Album image #16](/albums/img/2/3/7/1233237-10003-23-720.jpg)
The canopy is back on - and the lights are still working!
![Album image #17 Album image #17](/albums/img/2/3/6/1233236-10003-51-720.jpg)
And a few more shots of the finished Y-Wing.
![Album image #18 Album image #18](/albums/img/2/3/5/1233235-10003-96-720.jpg)
![Album image #19 Album image #19](/albums/img/2/3/8/1233238-10003-47-720.jpg)
![Album image #20 Album image #20](/albums/img/2/3/9/1233239-10003-39-720.jpg)
![Album image #21 Album image #21](/albums/img/2/4/0/1233240-10003-26-720.jpg)
You can see one of the cables for the cockpit lights.
![Album image #22 Album image #22](/albums/img/2/4/1/1233241-10003-14-720.jpg)
![Album image #23 Album image #23](/albums/img/2/4/2/1233242-10003-80-720.jpg)
Коментарі
89 3 April 2022, 16:54
![](/profiles/img/10003-571-s.jpg)
Project Violet has been started! Up to now Bandai doesn't disappoint - all parts fit very well. However, an important Y-Wing cockpit detail has been omitted: In the movie a bunch of ripped hose pipes runs through the cockpit. I'll need to add those once I got hold of an old guitar string of the right strength.
3 April 2022, 17:09
![](/profiles/img/10003-571-s.jpg)
All parts fit very well up to now, so I could concentrate on adding the cockpit lights. Three LEDs were connected in series in order to have just two wires coming out of the model. This whole thing is kind of a generations' project: The LED sub-assembly was supplied by my father, I'm now building the model and my brother is already busy with the display base.
9 April 2022, 12:59
![](/profiles/img/10003-571-s.jpg)
Yes, I can recommend to have a look at the Greenstrawberry website if you're planning to build any kind of sci fi model. And the owner is very friendly and a joy to deal with.
9 April 2022, 14:57
![](/profiles/img/10003-571-s.jpg)
Thanks John, David and berni! Yes, the build is quite fun up to now. I'll now spray on the very light grey main color. After that there will be some weathering and then all the small tubes still need to be added.
16 April 2022, 09:59
![](/profiles/img/10003-571-s.jpg)
Thanks a lot Roman, Kyle, Tim and Finn!
Weathering sci fi models is really the fun part for me. And all the fine detail and recessed as well as raised structues on the Bandai kit make this task all the more satisfying. The oil washes are now applied. I think next I'll spray on a flat clear cote and go for all those edges and raised details with some watercolor pencils or some drybrushing.
23 April 2022, 14:45
![](/profiles/img/108061-471-s.jpg)
Look forward to seeing it! I like to build pretty much anything so I plan to give the Star Wars universe a try sometime l. Agreed. Fun to be able to super weather and also fun to make stuff 100% look like what you want. Fictional universes are fun.
23 April 2022, 21:24
![](/profiles/img/10003-571-s.jpg)
Call the space plumber! The Y-Wing's fuselage is covered in pipes and hoses. As I'm painting and adding them only after I have finished the main parts (cockpit, fuselage, "wings") it feels like this is easily doubling my building time.
18 May 2022, 19:45
![](/profiles/img/108061-471-s.jpg)
Looking good! Looks like you're doing a fine job as a space plumber. Lol
18 May 2022, 22:07
![](/profiles/img/21096-573-s.jpg)
It is looking awesome. And it is not even finished
What are y using for your home made wash?
19 May 2022, 11:41
![](/profiles/img/10003-571-s.jpg)
Thanks Kyle, Villiers and Spanjaard for your encouraging comments!
The was as seen in photo 10 is just a grey mix of white and black oil paints, diluted with Humbrol Enamel thinner.
19 May 2022, 17:28
![](/profiles/img/10003-571-s.jpg)
Thank you Spanjaard, Konrad and Gary!
I've now added one of the engine pods. The other one still needs some more painting done as the front cover will later be shown removed, lying on the ground next to the spaceship. So the engine pod's interior at the front will be visible.
20 May 2022, 14:56
![](/profiles/img/13010-177-s.jpg)
Nice model, interesting color scheme and the wheatering fits very well, I like it 👍
21 May 2022, 07:45
![](/profiles/img/53362-440-s.jpg)
Looking really good. These Bandai kits are so good. Great detail. Beautiful painting and weathering.
21 May 2022, 08:29
![](/profiles/img/10003-571-s.jpg)
Thank you, Torsten, Kyle and Stephen!
Yes, these Star Wars Bandai kits may not be cheap, but they are very good value for the money spent.
28 May 2022, 12:10
![](/profiles/img/10003-571-s.jpg)
Thank you, Hanno, Robin and Alexander!
This morning I was able to finish this project. And the cockpit lights are still working, yes!
It was a very pleasant build, only the multitude of pipes and hoses proved to be a bit fiddly in some places. I managed to break two pipes from the ships underside. Luckily that's now hardly visible.
Well, the end of one project is the beginning of a new one! This time something more earthly again.
29 May 2022, 10:11
![](/profiles/img/10003-571-s.jpg)
Thanks, Roland, Rui, Curatorm, Stephen and Spanjaard! It was a fun build 🙂
1 June 2022, 20:04
![](/profiles/img/29367-876-s.jpg)
Absolutely beautiful, and superb presentation! I'm not a big fan of Star Wars kits, but this one is a beauty! Congratulations Bernd! 👍 👍 👍
3 June 2022, 00:54
![](/profiles/img/10003-571-s.jpg)
Alec, Ricardo and Kyle, thanks a lot for your kind comments!
I'm indeed a little bit proud of the cockpit lights as this was the first model where I added some. Although the lights and wiring were done by my father, so I only had to pay attention not to rip off anything when I installed them in the kit.
4 June 2022, 10:24
Album info
Late Xmas gift for my brother.