Стіна
Wall
July 1, 2024
Casey Beckettдодав новий фотоальбом.
56 зображення
Beech bomber 1948
1:72
Finally dealt with the awful putty/paint lump on the belly, marking centerline for RAF bomb racks next to go on.
Проект: IDF Bonanza 35 1948
3+All comments (17) » 26 28 February 2021, 01:22
June 30, 2024
Casey Beckettпозначив цей предмет як замовлений
Movie Collection No.5
F/A-18E/F Super Hornet & F-14 Tomcat Decal set Top Gun - Maverick Jeight Design 1:72
JD-72006 (JD 72006) 2022 Нова прес-форма Багато тем (1!!)30 June, 17:59
June 29, 2024
Casey Beckettхоче цей предмет
Mil helicopters rotor shock absorber for Mi-8/14/17/171
Top Gun Model 1:72
7201 2013 Нова прес-форма Багато тем (2)29 June, 15:02
Casey Beckettхоче цей предмет
Mil Mi-8/-14/-17 resque winch – PE and resin parts
North Star Models 1:72
NS72138 2015 Нова прес-форма Багато тем (2)29 June, 15:00
June 23, 2024
June 19, 2024
June 16, 2024
Casey Beckettхоче цей предмет
Martin-Baker MK5 Ejection Seat Belts/Straps/Handles
Kits-World 1:72
KW3D172026 16 June, 22:53
June 14, 2024
Casey Beckettдодав новий фотоальбом.
9 зображення
Trumpeter 1/72 A-6 Issues? 
1:72
Often seen closed on display aircraft - did Trumpeter model a museum bird? This is the A-6E outside of MCAS Cherry Poin...
Проект: VMA(AW)-533 Hawks A-6A
4+ 9 14 June, 00:37
RandoMan thanks for sharing this!! Makes plenty of sense. Great reference photos from someone who knows this plane as well as anyone!
14 June, 01:33
Oleg Bogoleifolllowing!
Even if forward part of gear door could be closed, there should not be flat wall between them.
So many mistkes(((
14 June, 08:38
Casey BeckettGreat new kit, a few wee issues - scales out darn near perfectly.
Seen several reviews complaining about fin cap shape - it is darn near spot-on. I worked on A-6s for over ten years, know this airframe intimately.
Couple small things I've caught as I contemplate my build -
- Big complaint from many, but not quite correct - some A-6A WERE IN fact retrofitted with MB GRU-7 seats, so this should not be a huge issue - anyone doesn't believe you, get this book - Intruder: The Operational History of Grumman's A-6 by Mark Morgan
- the 'slime lights' on the wing tips and fuselage above and forward of the speed brakes are wrong for an A-6A. A-6A did have a small formation light on the fuselage.
- Pitot tube is far too thick and too long
- 'v' shaped tabs on rear of radome are far too thick, in real life this very thin steel straps
- A-6A had one anti collision beacon on the nose door, not one one each intake belly as the kit has. So; one, not three as the kit has.
- Cockpit got the B/N lower and to the rear of the pilot pretty well.
-Instrument panel as molded would be a great depiction of a KA-6D tanker for starters, as the B/N had very little in front of him.
-Engine face is way too far forward - real aircraft the fan face was almost below the main wing root leading edge.
- Canopy is crystal clear and I think nailed the slight 'bulge' of each side of the canopy.
- several small vents are wrong for the -A, but correct for an -E or Tram model.
I won't complain about ordnance, they do all look pretty sketchy! (Fuel tanks look ok)
Overall, I am very happy to have a new mold, and will be getting the Tram version too
All comments (7) » 5 17 March, 02:28
Casey BeckettF-4s are my second love... SOOOOOO Many great Navy and Marine corps schemes, sure better than the SEA camo or boring greygreygrey USAF birds. Ya got F-4Bs, Ns, Ss, RF 4Bs,
I have a Kinetic 1/48 A-6e, that;s way down the pike though - I'll check out the Hobby Boss mold !
14 June, 01:34
RandoTotally agree. I'm building an SEA plane or two in my future but they're all so similar. I've been eyeballing Navy F-4 schemes, especially like the VF-161 Chargers with the black back and red lightning bolt on the tail. Lately I've been all about my Crusaders, with Sword and CAT4 opening up so many options it's hard to want to do anything else.
14 June, 01:48
June 12, 2024
June 9, 2024
May 29, 2024
May 28, 2024
May 27, 2024
Casey Beckettволодіє цим предметом
McDonnell-Douglas F/A-18A Hornet open/closed
Rob-Taurus 1:48
48070 27 May, 20:39
Casey Beckettволодіє цим предметом
Covered Exhausts For Hasegawa F/A-18A,B,C & D
MAW-Decals 1:48
48-R001 27 May, 20:37
Casey Beckettрозпочав цей предмет
Conversion set for HobbyBoss/Zvesda kit
Mil Mi-14PS (Haze-C) Ми-14 ПС "in coop. w. NeOmega" Resin magazin 1:72
72106 2016 Нова прес-форма 27 May, 18:32
May 25, 2024
ResKit 1:72
Casey Beckettхоче цей предмет
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series № 7
Rock Roszak, Mike Heideman
2023 25 May, 18:34
May 18, 2024
May 12, 2024
May 3, 2024
Casey BeckettGot mine today -Looks like a BT-67.
Initial assessment , not too bad!
So, what I see - fuselage is stretched. Clear parts are rough,(pits and not clear) - but do install from the outside of the fuselage, so that's a plus. Sprue gates are in some not too good locations, (leading edges, sides of wing/belly center section, a few others will need some careful separation. Detail looks mediocre, but a good start. Instrument panel is flat. Yokes and rudder pedals are awful thick. You do get weighted or unweighted tires, a nice touch. Minimal flash, but it is there. Sink marks are few but large inside the fuselage. Full interior although simple. The tail cone on mine was separated from the spue, it looks to be tough to clean up. Small short part, 4 radii, and leading to a point.
Panel lines - well they certainly are THERE. Far too heavy, have not compared them for accuracy with a proper line drawing of the aircraft.
Decals look great, particularly the Australian and Canadian flags. The prop logos are bit out of register. Carrier film looks to be just the right amount.
Now the big question, which scheme? So many lovely options for this airframe! The 3 in the kit are all good. One BT with is based near me in Smithfield NC, purportedly for "paratroop training" terribly boring scheme on that one, all white with two lime green? or gold? cheat lines - rumor has it it's a government plane used by our three letter agencies. I am leaning toward the "White Desert " scheme of Theia Aviation.
A replacement windscreen is a must, it's just too thick and pitted. Shame there.
3 May, 01:23
April 19, 2024
April 13, 2024
Casey BeckettStumbled on this for us A-6 geeks - if you don't have this book, get it.
The Operational History of Grumman's A-6 by Mark and Rick Morgan, published by Schiffer
The subtitle doesn't do it justice because it also covers development, configuration changes, and in-service problems.
Just as an example for the speed brakes complaints from builders -
Due to problems encountered in flight test and Navy evaluation, wingtip-mounted speed brakes were added at BuNo 149940 and the perforated fuselage-mounted speed brakes were deactivated shortly after the first A-6As were delivered to operational squadrons. The fuselage speed brake assembly was deleted entirely in production at BuNo 154170 and replaced with a blank panel. However, earlier A-6s, including those subsequently converted to A-6Es, retained the original perforated structure covering the speed brake well until it had to be replaced for cracking or corrosion. More than 10 were still flying with the original panel in 1991 while deployed for Operation Desert Storm. This is an example of a former A-6A in June 1983.
So, while I rarely saw a a perforated brake panel, they WERE still some in the fleet squadrons until the type was retired -
tailspintopics.blogs..-vs-6e-intruder.html
The Operational History of Grumman's A-6 by Mark and Rick Morgan, published by Schiffer
The subtitle doesn't do it justice because it also covers development, configuration changes, and in-service problems.
Just as an example for the speed brakes complaints from builders -
Due to problems encountered in flight test and Navy evaluation, wingtip-mounted speed brakes were added at BuNo 149940 and the perforated fuselage-mounted speed brakes were deactivated shortly after the first A-6As were delivered to operational squadrons. The fuselage speed brake assembly was deleted entirely in production at BuNo 154170 and replaced with a blank panel. However, earlier A-6s, including those subsequently converted to A-6Es, retained the original perforated structure covering the speed brake well until it had to be replaced for cracking or corrosion. More than 10 were still flying with the original panel in 1991 while deployed for Operation Desert Storm. This is an example of a former A-6A in June 1983.
So, while I rarely saw a a perforated brake panel, they WERE still some in the fleet squadrons until the type was retired -
tailspintopics.blogs..-vs-6e-intruder.html
13 April, 23:45
April 11, 2024
April 5, 2024
March 30, 2024
March 16, 2024
February 26, 2024
February 14, 2024
February 4, 2024
Casey Beckettдодав новий фотоальбом.
11 зображення
RF-4B Havelock, North Carolina 2 FEBRUARY 2024
RF-4B marked from VMCJ-2, based at Marine Corps Air Station Cherry Point. She's been outside and the paint shows it - ca...
1 4 February, 01:41
Jennifer FranklinThanks for sharing the photos of this plane. It's too bad they've stored her outside.
4 February, 02:20
February 2, 2024
Casey Beckettдодав новий фотоальбом.
27 зображення
D.C. 1952 UFO Incident F-94 Starfire
1:72
references galore, finally found ONE documented serial number at the right time, with this particular squadron, but no p...
Проект: July 1952 D.C. UFO incident
2+All comments (8) » 27 17 July 2021, 01:27
January 21, 2024
December 31, 2023
Casey Beckettхоче цей предмет
Canopy for TBF/TBM Avenger (Hasegawa)
Rob-Taurus 1:72
72089 31 December 2023, 22:33
December 25, 2023
Casey BeckettAllows slow speed drilling for screwdrivers and drills
¼ inch hex shanks fit screwdrivers and drills
Works with cordless and corded drills and screwdrivers
Holds bits from #61 to #80
Allows drilling of plastic and tiny detail work
Precision Micro Drill Chuck
Micro-Mark
82541 25 December 2023, 20:52
Casey Beckettхоче цей предмет
Intruder Airframe Stencils (High-Viz) A-6A, A-6E, A-6E TRAM, & KA-6D
AOA decals 1:48
48-002 2014 Нова прес-форма 25 December 2023, 19:13
Casey Beckettхоче цей предмет
A-6 Intruder Flaps, Slats and Wing Tip
Paragon Designs 1:48
48094 25 December 2023, 18:56
Casey Beckettхоче цей предмет
A-6A, A-6E Intruder, EA-6B Prowler Landing Gear for Kinetic/Italeri
Scale Aircraft Conversions 1:48
48098 2010 Нова прес-форма 25 December 2023, 18:55
December 16, 2023
December 12, 2023
Casey Beckettхоче цей предмет
B-17 Flying Fortress, PBY-5A Catalina, Bristol Beaufighter
IsraDecal Studio 1:48
IAF-74 Багато тем (1!!)12 December 2023, 02:47
Casey Beckettхоче цей предмет
US Navy pilot seated in a/c (80 - 90)
PJ Production 1:48
481114 12 December 2023, 01:53
November 24, 2023
November 18, 2023
wnolder.php?lang=uk
2023-11-18 22:18:59
2019-01-12 20:44:03
46988
/ajax/wnolder.php?lang=uk&sd=2023-11-18 22:18:59&md=2019-01-12 20:44:03&filter=&w=46988
todo