Airviper 0.2 Airbrush

Ammo by Mig Jimenez | 货号： AMIG-8624

基本信息

品牌:: Ammo by Mig Jimenez
标题:: Airviper 0.2 Airbrush
数量:: AMIG-8624
比例:: No
类型:: 工具
条码:: 8432074086246 (EAN)
主题:: Airbrushes » 绘画 (餐具)

市场

网店

注: 价格与有货情况均仅供参考。也请留意产品是否与查物匹配！

开盒测评

外部链接评测

我们并没有任何关于此套件的开盒测评 Airviper 0.2 Airbrush (#AMIG-8624) 从 Ammo by Mig Jimenez.

Yves
I've been disapointed with this airbrush : found some issue on mine > the needle protrudes too far forward the head while assembled, the spray of paint is low to go out and imprecise.
It's a strange anomaly which I am going to report to the manufacturer.

All comments (7) » 15 September 2022, 14:06

Roger Blanc
BTW, I use it with 15 psi.

14 March 2023, 22:40

Yves
Hi Roger,
Coming back.
Thanks for your informations !
Good for you, you 're going on the right way with it. I' m happy yours correctly works.
As you certainly know, Ammomig airbrushes are made by Badger company (USA).
I like their airbrushes while they are not the best ones on the market because of some issues when unboxing them : Yes, I have had some problem with my Aircobra five years ago when discovering it : needle and nozzle parts were too strong fitted, the oil on parts was sticky, the airbrush unable to use.
As you, I had to clean it entirely (except valve air inlet), I damp the parts in petroleum solution then lubrificating them and re mounting... but today it works perfectly, and I never change its needle nor nozzle.
And again as you say, far better than several Chinese Sh... I bought during the 10 last years.
So a very good airbrush, an all-round one (priming, coating, details, varnishing) ; I love it.

Unfortunately, I did not meet the same success with my Airviper.
I made several tests on the last days and it still refuse to work. disassembling, re-assembling, cleaning, greasing, fitting a new nozzle...
Nothing blow out from it. Incomprehensible.

I'm sure the airbrush body is Ok. The issue certainly comes from the nozzle / nozzle cap junction ; I have now bubble in the cup when using it.
The only thing i haven't tried yet is changing the needle, because mine seems to be in good condition.

I would have to buy a new complete kit (nozzle + needle + nozzle cap guard), but because I 'm afraid of loosing money I hesitate !

Please let me know about your next experiences with it, I appreciate.

On my part I'll let you know if I fix the problem.

Best regards

24 March 2023, 15:13