A-6 "Intruder" , EA-6 "Prowler" wheels set
ResKit | 货号： RS32-0001 | 1:32
基本信息
- 品牌:
- ResKit
- 标题:
- A-6 "Intruder" , EA-6 "Prowler" wheels set
- 数量:
- RS32-0001
- 比例:
- 1:32
- 类型:
- 细节改造件
- 发布:
- 2020 新模具
- 条码:
- 4589913295353 (EAN)
- 主题:
- Grumman A-6 Intruder » 喷气机 (飞机)
设计为
该改件适用于：:
新模具
新零件市场
网店
USD 14.99
有货 »
USD 16.49
有货 »
USD 17.18
有货 »
USD 16.19
可用 »
USD 19.99
可用 »
zł 59.13
USD 15.31有货 »显示所有报价 » (10 总计)
替代 SKU ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001
注: 价格与有货情况均仅供参考。也请留意产品是否与查物匹配！
开盒测评
外部链接评测
我们并没有任何关于此套件的开盒测评 A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) 从 ResKit.
评论
Jon SomervilleThe holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
All comments (10) » 1 19 April 2021, 15:43
Jon SomervilleI bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
19 December 2023, 13:44
Jon SomervilleNow that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
25 January, 17:38
参考资料
A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...
Colors & Markings Series 货号： 7
Rock Roszak, Mike Heideman
2023