News Feed
ICM 1:35
Łukasz Gliński添加了一个新相册
13 图片
Neutral Shturmovik
1:72
Main holes filled, tail complete, except for a couple of ribs on top
项目: C-36
35 22 July 2023, 18:41
Moreno BaruffiniWow! I wasn't aware of this plane. Following with a lot of interest!
22 July 2023, 19:04
Moreno BaruffiniI'm also curious about Dübendorf, now the Alptransit tunnel is closed, but It should be a nice trip from southern Alps
23 August 2023, 18:16
Łukasz GlińskiWell, I visited Dübendorf only once, more than a decade ago. Not that the Switzerland changes very quickly, but it was a while ago 😉
Not the biggest one I've been to (don't expect the size of Duxford), but very interesting. As it's in CH, there are many unique airplanes on display, so highly recommended.
The C36 was unfortunately parked the way you couldn't see the interior v.well, so there's a lot of guesswork involved in this build. Kora's kit has the same interior setup for all C36 versions which is not true for sure.
24 August 2023, 09:44
Łukasz GlińskiWelcome amigo 👍 I had to use some brute force today, but the fuselage has been closed
8 October 2023, 21:31
Edward MacKenzieWell, it's time for me to take a seat here too, especially because i have this kit in my stash and live 10 minutes from Duebendorf 😉
9 October 2023, 04:06
Moreno Baruffini...At the end of the day, I've also bought this kit! Great progress 👍
9 October 2023, 05:41
Łukasz GlińskiThanks a lot, it's sort of on hold currently, as I prefer sanding the resin kits outdoors 🙂
6 January, 21:25
CuajeteI agree with you, Łukasz 👍
Despite this, it is advisable to use a mask or you can even sand inside a bag if you do not do it outdoors. Resin dust is toxic and can be carcinogenic.
7 January, 20:37
Michael KohlConsider wet sanding. It ameliorates the dust problem considerably. Not using a dust mask when dry sanding resin isn't the most brilliant idea - being it in- or outside.
7 January, 20:52
Łukasz GlińskiJust to be clear, inside or putside - mask is always there, I just skip cleaning the residue from the modelling room 👍
7 January, 21:33
Łukasz GlińskiCA glue and some fancy sand from Revell Fix kit. Still, lots of sanding ahead
8 April, 12:00
Łukasz GlińskiWelcome Thomas, great to see you here. I advanced a bit lately and managed to force the canopy into submission (just in case you wondered - there are 2 pieces in the kit)
18 August, 15:07
Ben MI've had the same issue with vacu canopies. Each one has gotten a little better for me.
18 August, 15:22
Łukasz GlińskiWelcome folks, progress is slow, but I hope to start painting soon (this year at least)
5 September, 18:24
Łukasz GlińskiWelcome JK 👍
After priming I found out a lot of bubbles in the resin, in particular on the fuselage - trying to locate and fill'em all.
20 October, 20:09
CuajeteI'm glad to see this project being resumed, Łukasz.
If you can't get rid of any bubbles, you can say they are bullet holes or pellet holes 😛
21 October, 18:56
Łukasz Gliński添加了一个新相册
16 24 October, 19:47
Łukasz GlińskiMy first encounter with Kelik's 3D decals didn't look very promising at the start.
But the final result (using the PVA glue) turned out better than expected.
Take a closer look at the ejection handle - it's printed on both sides! (I put it back to front of the cockpit)
I can only highly recommend this stuff 👍 And didn't even use the whole set 😄
24 October, 19:49
CuajeteA very nice decoration, Łukasz!
I also plan to do the same using Syhart decals, better than those included in Revell. And the special set for this decoration of MRP paint cans (MRP-207).
If you can find them I recommend them.
Very nice cockpit 👍
27 October, 19:31
Łukasz GlińskiThank you and welcome everyone!
@Cuajete: I already have a BilModel paint bought a loooong time ago. If you have Syhart decal (I assume it's the same as Revell's one is printed by them) you need only the brighter orange of the two included in MRP set. The darker one is for those who want to spray the lion themselves.
27 October, 21:31
CuajeteŁukasz, Shyhart decals are not the same as Revell decals. Shyhart decals reproduce the color effect of this decoration better than Revell decals. I was going to use the decals from the Revell kit, but I was able to get the Shyhart one at a good price (I had already gotten the paints from MRP before). If you don't have Shyhart decals, Revell decals are not that bad. I don't know BilModel's paintings. I'm curious to see the result 👍
In any case I'm sure you'll do a great job as always, 😉
28 October, 18:44
Łukasz GlińskiI have to admit I'm surprised a lot, I thought they're the same 😮 Good to know, thx
I have only a single bottle of BilModel paint and yes that's the demo orange - seems to be a lacquer luckily (tested using various thinners), so it should work well, fingers crossed.
29 October, 09:57
CuajetePerfect, Łukasz! 👌
No, it's not the same. I was looking for the review where I saw a comparison between both decals, but I can't find it.
I'm looking forward to seeing the result of that demo 🙂
29 October, 19:00
Łukasz Gliński添加了一个新相册
3 24 October, 19:52
Łukasz GlińskiWelcome Robert!
Spent last few evenings filling and sanding the side-ducts (or whatever they should be called), now they are good enough to get the blue me thinks (along with the cockpit).
12 November, 20:12
Dominik Weitzer添加了一个新相册
14 9 November, 18:50
BozzerI'm glad I came across this, and from one of my favourite builders too
Back in the 90's I had an escort, just like this. It was my first decent car, and it cost me a lot of money. I remember going to the bank, for a loan, to buy it! I had to have an interview with the bank manager, before he approved the loan. Boy, how things have changed!
Anyway, I loved that car so much, that I found this exact kit, and built it while on vacation. It didn't last, because my boys were young and they liked it and used it as a toy. Skip forward 30 years and I go in search of the kit. I find the Revell version, and the AMT version! Only last week, did I actually get the correct colour for the car I owned, from the car spares store!
I think you know, what my next build is going to be 😉
10 November, 12:10
Dominik Weitzeri like your story 🙂
I didn't know the difference between the amt and revell kit. I think, they are not unboxed from amt to revell. all i see are different bumpers and LHD on the amt.
Thats interesting!
i had nearly similar story :-D
In the company where I did my training as a car mechanic, there was such an Escort XR3i for sale, which I wanted. Unfortunately, I was too young... and could not afford it. The escort was sold very quickly.
That's why I had to build it red. looking forward to your build. Bozzer
10 November, 16:50
Dominik WeitzerAgreed Istvan - i would llike to see Bozzers build too 🙂 . i missed to make pictures.
Thank you 😉 much appreciated
10 November, 17:08
BozzerLol, you guys will get to see it, I promise.
I mainly hang out on here, these days, so my builds get shown here.
The AMT version is a curbside. I don't mind that, because of my passion for them. The Revell kits, have an engine/motor, and that I know all about! I was the local "go to" guy, for changing the timing belt. I had every variation of the car, apart from the RS. Truth is, I'd have another today!
10 November, 18:18
Christian WSo cool to read of all that memories. Thank you for showing this beauty and unusual kit. Hopefully Boozers Escort will be in the row soon 😉
11 November, 06:10
BozzerWell, you might get to see it, before you think?
Body is in primer, a few bits to attend to, top coat tested and it's close 🙂
I can only do a little, each night, but weekend should get a lot of progress.
12 November, 20:10
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo