News Feed
![](/profiles/img/43210-278-s.jpg)
These decals are thin and strong with very little extra carrier film around the markings.
9 September, 02:12
![](/profiles/img/22360-370-s.png)
想要这件
![1:72 28 cm Kurze Bruno on Voegele-turntable (5 Star Models 72010) 72010](/products/img/5/3/7/1574537-22360-33-t180.jpg)
28 cm Kurze Bruno on Voegele-turntable
5 Star Models 1:72
72010 9 September, 02:10
![](/profiles/img/43210-278-s.jpg)
添加了一个新相册
22 29 May, 22:29
![](/profiles/img/69549-898-s.jpg)
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.
The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.
27 July, 09:16
![](/profiles/img/43210-278-s.jpg)
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.
I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.
27 July, 12:12
![](/profiles/img/69549-898-s.jpg)
Ben, you're right that trainer planes didn't usually drop tanks. In peacetime, in normal use, even combat aircraft don't drop tanks (except in emergency situations or exercises).
The purpose of my comment was merely to explain why the tanks on Indonesian aircraft differ from those in the kit.
I look forward to following your progress and wish you a lot of fun building the model and the result to your liking.
27 July, 13:02
![](/profiles/img/43210-278-s.jpg)
Well the other night I got frustrated with the Vallejo gloss black primer clogging my airbrush, so I added some Mr leveling thinner and gave it the worst orange peel ever as this is totally incompatible with the paint. I thought I could selectively strip the paint with windex but while that kind of stripped the paint it also dissolved a lot of the perfect plastic putty and also dissolved the canopy pva glue and masking. Also I broke off a wing and a horizontal stabilizer. So a bit of a setback.
I have constant problems getting the Vallejo gloss black primer to not clog my 0.4mm nozzle.
18 August, 01:28
![](/profiles/img/138076-707-s.jpg)
It's sad, Ben. These Vallejo primers can only be diluted with distilled water because they are based on acrylic urethane (this is my IMHO). Even Vallejo's Thinner and Flow Improver for acrylic paints does not go well with these primers. The same applies to their polyurethane varnishes.
18 August, 06:35
![](/profiles/img/28909-839-s.png)
Not saying this will solve your issue, but they have a video with ratios out: Youtube Video
![](https://img.youtube.com/vi/r_0n7w64w4c/maxresdefault.jpg)
18 August, 06:50
![](/profiles/img/49481-557-s.jpg)
Wow that video seam to show it's a lot of hard work to get their primer coat working 👀
I'd go with mr surfacer 1500 approx 50:50 with mr levelling thinner, then if you need a gloss use mr Color gx110 again 50:50 with levelling thinner, sounds just as complex but I've never had this block airbrush and you can get rid of surface issue before you gloss saving the thicker gloss primer obscuring details..
Good luck on you build
18 August, 07:54
![](/profiles/img/13641-502-s.jpg)
Very sad nwes mate - hope to see you back on this project with the new kit, this one looks fubar unfortunately.
18 August, 09:01
![](/profiles/img/43210-278-s.jpg)
Painted some detail parts. Unlike the Vallejo primer, the metallics shoot like a dream. Started reassembly. I will have to re-putty and this kit needs a lot of putty. The canopy is a goopy fogged mess, I'm going to soak it in degreaser to hopefully strip off the future and start over on it.
18 August, 14:36
![](/profiles/img/69549-898-s.jpg)
The accident on your project is really unpleasant. I wish you a steady hand and a lot of patience in dealing with the aftermath.
22 August, 12:27
![](/profiles/img/user-s.jpg)
Wow, that looks like a tough kit...
Coming along nicely now though it seems.. 👍
Looking forward to updates.
23 August, 22:18
![](/profiles/img/43210-278-s.jpg)
I finally broke the pitot tube off, amazing it stayed on this long with all the handling I had to do. The second time I did the puttying I didn't sand things as smooth, live and learn. This kit has a lot of challenging fit issues. I think I will decal next. Fairly happy with the canopy, it was a bear to mask. The gun blast panel and air brakes came out nice, slight contrast with the rest of the nmf.
8 September, 18:32
![](/profiles/img/65866-287-s.jpg)
添加了一个新相册
12 30 August, 22:31
![](/profiles/img/65866-287-s.jpg)
Have decided on my next victim, so pulled this one out of the stash this morning and gave the parts a rinse to clean off the mold release agents etc. Hope to make a start on it in the next day or so once dried. Similar to the Panzer 1A that I built previously, but this one is slightly longer due to having an extra road wheel, as well as a modified rear engine deck and exhaust due to having a different engine. Haven't decided if it will be based in France or Greece yet, but definitely leaning towards the grey and brown camouflage per the box art.
30 August, 22:32
![](/profiles/img/56165-775-s.jpg)
I'd recommend adding the superstructure from front to back as you can have alignment issues. You can get decals for the fire extinguisher, which are not in the kit.
6 September, 11:43
![](/profiles/img/65866-287-s.jpg)
Thanks guys 🙂
Really enjoying the larger 1/16 scale, and finding them much easier on the eyes to assemble.
Thanks John and yeah, that's what I did with the "A" version I built previously.
6 September, 19:35
![](/profiles/img/65866-287-s.jpg)
I got quite a bit more done today with both track runs mounted for a test fit. They worked out quite well in the end, being much better than the plastic links that come in the kit. Far easier to assemble as well as only took a couple of hours versus several days for the stock plastic parts. Adds a nice bit of weight to the model as well. Still need to adjust the tension a little to get them sagging properly but pretty happy with how they turned out. Started to loose the natural lighting so will leave the turret assembly and smaller detail parts for tomorrow.
7 September, 01:13
![](/profiles/img/65866-287-s.jpg)
Finished off the assembly a little while ago. Just needs a little clean-up in a couple places before I tear it apart again to airbrush a coat of black primer on it. I'm hoping it will be a little warmer tomorrow which will help with drying times. Am also considering adding an extra link to both track runs as in hindsight the tracks look a little tight at present with 97 links.
9 September, 01:58
![](/profiles/img/22896-413-s.jpg)
添加了一个新相册
2 9 September, 01:56
![](/profiles/img/22896-413-s.jpg)
OK. Well I decided since I was bogged down in my other builds, Id go ahead and do this one.
Frank Frazetta has always been a favorite of mine. I fell in love with his stuff seeing the covers of Conan paperbacks. Then in 78 the first Molly Hatchet album came out with this as its cover. I bought that album based SOLELY on that cover as it was their first and I hadnt heard them yet. LOL Luckily they were a great band. LOL
There is a Frazetta museum here in Stroudsburg PA, about 3 hours from my house. Im planning on taking this there and taking pics of it there. IF it comes out worth a damn.
OK, so, its a relatively simple build. BUT, as you can see, while the fit is OK, it has serious seems. *sigh* Its gonna require a little more work than I was hoping for.
I am not attaching the arms or head to the rider yet, nor the cloak. Those will be painted then attached to make it easier. The things like reigns are separate pieces that will get painted then all put together.
Next session is getting those seams done.
9 September, 01:57
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo