News Feed
zakboom0815
添加了一个新相册
添加了一个新相册
12 21 July, 14:53
CaptGPF
Phenomenal built! The weathering, mud and rust effects really shine, and the rfigures turned out perfectly. Don't know how you got those eyes right, but very well done!
Phenomenal built! The weathering, mud and rust effects really shine, and the rfigures turned out perfectly. Don't know how you got those eyes right, but very well done!
21 July, 15:11
zakboom0815
Thank you very much for your kind words! I struggle a lot with eyes, and the commander also looks quite tired in his tank....maybe he was 🙂
Thank you very much for your kind words! I struggle a lot with eyes, and the commander also looks quite tired in his tank....maybe he was 🙂
21 July, 20:52
Andrew Read
添加了一个新相册
添加了一个新相册
14 图片
Pegasus 1/72 BAe Experimental Aircraft Programme.新的: 22 July, 09:15 1:72
I bought this kit in the late 1980s after the EAP had first flown but before the Eurofighter was a reality.
5 21 July, 10:25
Andrew Read
One of my first attempts at a limited-run cottage industry kit, and I am thankful I left it more than 40 years before tackling it. I now have far more patience for what is a tricky kit for a casual modeller such as me!
One of my first attempts at a limited-run cottage industry kit, and I am thankful I left it more than 40 years before tackling it. I now have far more patience for what is a tricky kit for a casual modeller such as me!
21 July, 10:27
Roland Sachsenhofer
添加了一个新相册
添加了一个新相册
29 7 July, 09:05
Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
7 July, 09:08
Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
7 July, 18:13
Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
7 July, 18:25
Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
8 July, 06:46
Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
8 July, 14:30
Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
9 July, 12:40
Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
11 July, 15:21
Michael Kohl
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
11 July, 17:27
Roland Sachsenhofer
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
12 July, 06:56
Roland Sachsenhofer
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
17 July, 17:34
Roland Sachsenhofer
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
18 July, 11:51
Robert Podkoński
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
18 July, 14:43
Roland Sachsenhofer
Robert, thank you for that important hint, I wasn't aware of this!
Robert, thank you for that important hint, I wasn't aware of this!
18 July, 14:47
Roland Sachsenhofer
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
18 July, 18:18
Robert Podkoński
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
18 July, 19:47
Roland Sachsenhofer
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
21 July, 18:12
Ben M
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
21 July, 20:04
gorby
I didn't know it had an undercarriage. The photos make it look like a very impressive beast.
I didn't know it had an undercarriage. The photos make it look like a very impressive beast.
22 July, 05:51
Robert Podkoński
Fantastic job, Roland! (@gorby - it should be rather caller a beaching gear, imho, as it was used only to maneuvre on terra firma).
Fantastic job, Roland! (@gorby - it should be rather caller a beaching gear, imho, as it was used only to maneuvre on terra firma).
22 July, 06:54
Eyman Ahmed
拥有此物
拥有此物
realistic wood effects *8th Edition
AK Learning series 货号: *1
Mike Rinaldi, Roberto Ramirez, Daniel Zamarbi...
2013 22 July, 09:03
Eyman Ahmed
拥有此物
拥有此物
Dassault Mirage III E/R - cockpit set with MB Mk.4 & MB Mk.10 ejection seat for Kinetic
SBS Model 1:48
48045 2015 新模具 22 July, 09:02
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo