News Feed
o_O o_O
添加了一个新相册
添加了一个新相册
48 图片
ГАЗель NEXT (Lenmodel) Диорама "Инкассация" 1:43新的: 14 September, 15:19 1:43
项目: Gazelle NEXT
Scratchbuilt
5 23 June, 20:28
Jakko
添加了一个新相册
添加了一个新相册
25 图片
Early M2 half-track car新的: 14 September, 15:17 1:35
Exhaust pipe fitted. I lost the end part so replaced it with some aluminium tube. The bracket is just some strip and ben...
8 31 March, 15:22
Desert Marlin
Watch the Cab to Chassis interface on this kit. My GMGC had some difficulty with that!
Watch the Cab to Chassis interface on this kit. My GMGC had some difficulty with that!
1 April, 03:46
Jakko
Thanks for the heads-up. I've been dry-fitting the floor and the rear body (main parts already built) and they seem to fit well enough to the chassis, but I won't know for sure until I get the cab built, of course.
Thanks for the heads-up. I've been dry-fitting the floor and the rear body (main parts already built) and they seem to fit well enough to the chassis, but I won't know for sure until I get the cab built, of course.
1 April, 08:42
Desert Marlin
I was the same for mine! I still think I messed something up. But they look great when finished!
I was the same for mine! I still think I messed something up. But they look great when finished!
1 April, 18:20
Jakko
I have seen somebody build a Dragon M3 halftrack, and he had some trouble lining up the cab and the back half, so I think it will pay to keep a close eye on fit straight from the start.
I have seen somebody build a Dragon M3 halftrack, and he had some trouble lining up the cab and the back half, so I think it will pay to keep a close eye on fit straight from the start.
1 April, 20:21
David Goodchild
添加了一个新相册
添加了一个新相册
10 图片
Airfix A01033V Hawker P.1127新的: 14 September, 15:17 The little pilot figure is so cute... I painted the jets in silver by hand, but then realised they would be better in a ...
14 September, 15:15
Martin von Schreckenstein
添加了一个新相册
添加了一个新相册
19 16 August, 20:06
Martin von Schreckenstein
started on too many things at once. it is very difficult to prioritise with such amount of really interesting details. after the nose gear I will try to focus on the cockpit
started on too many things at once. it is very difficult to prioritise with such amount of really interesting details. after the nose gear I will try to focus on the cockpit
8 September, 15:44
Martin von Schreckenstein
welcome and thanks Skyhiker, Sergej, Rolf, Alex, Patrick and Maciej!
following up with the interior, I wanted to get rid of any and all gloss with flat coat but it made everything brighter. might leave it or ill try to darken the side panels later. gotta let it lie for a bit🙂
welcome and thanks Skyhiker, Sergej, Rolf, Alex, Patrick and Maciej!
following up with the interior, I wanted to get rid of any and all gloss with flat coat but it made everything brighter. might leave it or ill try to darken the side panels later. gotta let it lie for a bit🙂
14 September, 15:13
Jake Holshuh
完成了此项目
完成了此项目
14 September, 15:11
Jake Holshuh
not my best effort but I lathered it with the funny decals of the kit.
not my best effort but I lathered it with the funny decals of the kit.
14 September, 15:11
Mike Volkov
添加了一个新相册
添加了一个新相册
27 12 August, 14:29
Mike Volkov
Unfortunately the model has suffered unrepaired damage and will not be completed. 😥 Maybe I will buy the kit again later.
Unfortunately the model has suffered unrepaired damage and will not be completed. 😥 Maybe I will buy the kit again later.
20 August, 14:58
Thomas Kolb
Oh, I am so sorry, it looked absolutely superb! 🙁 But I know, these things happen from time to time, one bad move and it all goes down the drain.
Oh, I am so sorry, it looked absolutely superb! 🙁 But I know, these things happen from time to time, one bad move and it all goes down the drain.
20 August, 18:43
Spanjaard
would the cockpit be salvaged? it was looking great (riveting was looking amazing too)
would the cockpit be salvaged? it was looking great (riveting was looking amazing too)
13 September, 18:24
Mike Volkov
It happened that I overdid the chipping. When it was done, I felt I had chipped too much paint. These Zeroes were not as characteristically worn as the green ones. I thought I'd start over and started washing it off with thinner. The Leveling thinner didn't clean it off though, it just mixed the paint with the metallic paint. I tried to wash it off with Mr. Tool Cleaner, but it immediately dissolved the plastic, deforming the wing.
So sadly, I gave up on it. I dismantled the landing gear, cockpit, propeller and engine cowling, which I was able to salvage and will use in another project later.
It happened that I overdid the chipping. When it was done, I felt I had chipped too much paint. These Zeroes were not as characteristically worn as the green ones. I thought I'd start over and started washing it off with thinner. The Leveling thinner didn't clean it off though, it just mixed the paint with the metallic paint. I tried to wash it off with Mr. Tool Cleaner, but it immediately dissolved the plastic, deforming the wing.
So sadly, I gave up on it. I dismantled the landing gear, cockpit, propeller and engine cowling, which I was able to salvage and will use in another project later.
13 September, 19:34
J35J
I feel you, have been in the same situation. Great that you were able to salvage some parts. Keep up the good work!👍🏻
I feel you, have been in the same situation. Great that you were able to salvage some parts. Keep up the good work!👍🏻
13 September, 19:39
Frank Brzobohaty
A good rule of thumb when chipping, when you get to the point where you say "maybe just a bit more"......STOP! Leave the model for a couple of days or a week then take a look at it again. At that point you will, in most cases, say just right.
This is a hard rule to master. Even with my super worn Hawker Typhoon I should have stopped sooner.
Yes go and get another kit and use the wonderful work to finish that one or use what you salvaged to add to a diorama. (striped down cockpit trainer with some pilots and instructors observing) There are so many good IJN figures in1/72 these days.
A good rule of thumb when chipping, when you get to the point where you say "maybe just a bit more"......STOP! Leave the model for a couple of days or a week then take a look at it again. At that point you will, in most cases, say just right.
This is a hard rule to master. Even with my super worn Hawker Typhoon I should have stopped sooner.
Yes go and get another kit and use the wonderful work to finish that one or use what you salvaged to add to a diorama. (striped down cockpit trainer with some pilots and instructors observing) There are so many good IJN figures in1/72 these days.
14 September, 15:05
Landlubber Mike
添加了一个新相册
添加了一个新相册
11 1 September, 22:54
Luis
开始了此项目
开始了此项目
Argentina Navy Skyhawk/Super Etendard Falklands War for: Hasegawa/Hobbycraft A-4B/C & Heller Super Etendard
Aerocalcas Argentinas 1:48
48006 2003 新模具 多主题 (2)14 September, 15:00
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo