News Feed
bughunter
添加了一个新相册
添加了一个新相册
11 图片
WIP of a blue-yellow biplane新的: 3 November, 18:38 1:48
The yellow is nice. A red cap will follow on the fuel socket.
21 31 October, 18:27
bughunter
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
31 October, 18:55
Ludvík Kružík
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
31 October, 22:40
bughunter
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
1 November, 16:49
Kenneth
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
2 November, 08:55
bughunter
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.
2 November, 16:24
bughunter
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.
2 November, 19:49
Robert Podkoński
Perhaps you will find my photos useful for your build:
Hangar 10 | Album by podkon
Perhaps you will find my photos useful for your build:
Hangar 10 | Album by podkon
2 November, 21:31
bughunter
The wing is yellow again, but now the look is better!
I used here MRP-142 Orange Yellow. If someone remembers my Piper: the yellow was "Dark Chrome Yellow" also from MRP. Even this one here called "Orange Yellow" is looks more yellow compared to the Piper.
The wing is yellow again, but now the look is better!
I used here MRP-142 Orange Yellow. If someone remembers my Piper: the yellow was "Dark Chrome Yellow" also from MRP. Even this one here called "Orange Yellow" is looks more yellow compared to the Piper.
3 November, 18:47
Prieur Gaël
添加了一个新相册
添加了一个新相册
55 2 January, 20:40
Prieur Gaël
Hello Alex
I used AK real color RC252 and RC235 for the blue ones and the RC247 for the radome.
Hello Alex
I used AK real color RC252 and RC235 for the blue ones and the RC247 for the radome.
3 January, 18:13
Vincent
Very nice! I thought there wasn't a good single seat mirage 2000 kit in 1/72 scale.
Very nice! I thought there wasn't a good single seat mirage 2000 kit in 1/72 scale.
3 November, 13:05
Prieur Gaël
Hi Vincent, now we have the Modelsvit range, the B is scheduled for early December.
Thanks to Modelsvit we also have the Mirage III family which is almost complete, there remain the planes modified by Israeli companies for Latin American countries
Hi Vincent, now we have the Modelsvit range, the B is scheduled for early December.
Thanks to Modelsvit we also have the Mirage III family which is almost complete, there remain the planes modified by Israeli companies for Latin American countries
3 November, 18:46
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo