News Feed

Robert Podkoński
I will follow this build with interest!

Alec K
Holy FLOAT supports! Following as well.

Guy Rump
Following too 👍

J35J
Initial test fitting started. Will require more sanding and putty that expected for such a new kit.

Ben M
👀

Doubtingmango
This looks like fun

J35J
Thank's Ben M & Doubtingmango for your intrest. Welcome to the project!

John
Cool subject and nice start 👍 Test fitting is half the "fun" on these limited run kits.

J35J
Thanks John, test fitting can be quite rewarding for the rest of the build if you take your time and have some patience.

Ben M
Engine looks sharp

J35J
Thanks Ben, there was a nice resin engine coming with the kit

Doubtingmango
Watching

Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍

J35J
I'm in!

Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍

Miguel Vaquero
Looking good mate. Following!!

Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍

Robert Podkoński
Joining the party!

Mr D
Thanks Robert, good to have you on board 👋😀👍

Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?

Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍

Doubtingmango
Brilliant! The putty really can create a mess with finely molded details

NLAWScametovisit
This is extremely clever!!!

Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???

Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep

Landlubber Mike
Looking really good Mr D!

Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍

Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome

Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.

Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums

Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍

Guy Rump
Following with interest! 👍

Mr D
Thanks Guy.... good to have you around 😃👍

Miguel Vaquero
Looking amazing. That camo Is on point 👌👌

Cristian A
Following

Ekki
And me.

Mirko Römer
Inn

Ferenc Sarka
Awesome job with the crew! Watching.

Nicolas
Following

NICOLAS GRANDMONTAGNE
Rivetage terminé avec les rivets Eduard.
Riveting completed with the Eduard Decals.

Ferenc Sarka
The tail rotor is a masterpiece! May i ask the brand of the crew? Keep going. It will be a superb Apache.

NICOLAS GRANDMONTAGNE
Thanks @Frenc Sarka
The crew is from REEDOAK, a french brand.

Bozzer
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.

Martin Oostrom
Show us the pictures!

Bozzer
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.

Mona
oh there's the uhmm...trailer 😉 👍

Bozzer
After dinner, I'll make sure that I grab you both some pics 😉

Bozzer
Ok, as promised, just for you guys 🙂

Martin Oostrom
It looks so weird in that milky plastic

Bozzer
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?

Martin Oostrom
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!

Nigel Chapman
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!

Bozzer
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!

Mr D
Looking great 👍
What is it made from??
I've never come across a build like this??

Snake Plissken
One of the best things about this site (scalemates) is that it exposes one to a lot of previously unknown airplanes (cars, tanks, ships, helicopters etc. too). This a pretty sleek looking plane -- thanks for sharing and post plenty of photos! 😎