News Feed

Lex Jassies
Planning to make a forced perspective diorama? If so, looks like a great idea 🙂 following!

Finn
This looks really interesting - will follow

Sky after Snow
Yes, my first time to try forced perspective diorama. I Also prepared two Akagi, 1:700 and 1:2000. Will try to finish by this weekend.

Thomas Kolb
This is really interesting and creative! And the models look absolutely beautiful too.

Spanjaard
really curious about the final results. beginning is very promising 🙂

gorby
Interesting idea. Beautiful work so far.

Neuling
Same as gorby ..........

Villiers de Vos
A very original pose. Very nice progress.

CaptGPF
Following too!

Vincent
This looks interesting!! Good luck🙂

Nicolas
Very nice.

Spanjaard
explosion looks amazing

Pietro De Angelis
Truly scenic!

Sky after Snow
Thanks for everyone's encourage, my first forced perspective diorama project just completed.

Finn
Very cool, congrats!

Doubtingmango
Fun!

Mat
Really nicely done

Frank Molnar
Thanks Mat 👍

George Williams
Very cool and neatly finished. Why aren't there more cars named after fish?

Mat
George, you don't remember the Dodge Goldfish or The Ford Salmon?

Kyle DeHart
Beautiful work on this!

George Williams
Hi, Mat, very good, I always fancied a Hillman Haddock.

Frank Molnar
Thanks George, thank Kyle 👍

Chris Reimann
Beautiful work, looks sharp!

Frank Molnar
Thanks Chris 👍

Martin Oostrom
Nice build Frank.
RE: the fish names Youtube Video

George Williams
Great Martin, I watch Grand Tour as well.

Lost_Erik
Wonderful result 👍

gorby
Fantastic work!

Neuling
Very good camouflage paintwork!

DerMattes
Which kit is this?

Ekki
Wonderful result!

alessandro magrelli
Thanks everyone. @DerMattes is the Modelsvit Mirage III B 1/72 kit. I forgot to add it to the project.

Nicolas
I got this kit on the to do list as well so I'm following. Nice start.

Robert Podkoński
Following, of course! I loved these "original" Kovozavody kits.

Łukasz Gliński
What a trip down the memory lane for just 3 bucks 😄 👍

Ben M
The fit on this kit…. Not great, not terrible.

Guy Rump
Following. 👍

Ludvík Kružík
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.

The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.

Ben M
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.

I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.

Ludvík Kružík
Ben, you're right that trainer planes didn't usually drop tanks. In peacetime, in normal use, even combat aircraft don't drop tanks (except in emergency situations or exercises).

The purpose of my comment was merely to explain why the tanks on Indonesian aircraft differ from those in the kit.

I look forward to following your progress and wish you a lot of fun building the model and the result to your liking.

Mr D
Doing a nice job 👌
I would by one for 3$ anytime 🤣

Ben M
The fit on this kit is ludicrous. Having a lot of fun with it though.

Ben M
Well the other night I got frustrated with the Vallejo gloss black primer clogging my airbrush, so I added some Mr leveling thinner and gave it the worst orange peel ever as this is totally incompatible with the paint. I thought I could selectively strip the paint with windex but while that kind of stripped the paint it also dissolved a lot of the perfect plastic putty and also dissolved the canopy pva glue and masking. Also I broke off a wing and a horizontal stabilizer. So a bit of a setback.

I have constant problems getting the Vallejo gloss black primer to not clog my 0.4mm nozzle.

Robert Podkoński
Sorry to hear that, Ben...

Duster_d
It's sad, Ben. These Vallejo primers can only be diluted with distilled water because they are based on acrylic urethane (this is my IMHO). Even Vallejo's Thinner and Flow Improver for acrylic paints does not go well with these primers. The same applies to their polyurethane varnishes.

Martin Oostrom
Not saying this will solve your issue, but they have a video with ratios out: Youtube Video

Sy Bar
Wow that video seam to show it's a lot of hard work to get their primer coat working 👀
I'd go with mr surfacer 1500 approx 50:50 with mr levelling thinner, then if you need a gloss use mr Color gx110 again 50:50 with levelling thinner, sounds just as complex but I've never had this block airbrush and you can get rid of surface issue before you gloss saving the thicker gloss primer obscuring details..

Good luck on you build

Łukasz Gliński
Very sad nwes mate - hope to see you back on this project with the new kit, this one looks fubar unfortunately.

Ben M
I have not yet begun to fight. It is but a flesh wound.

Mark D
Sharp, clean build, very nice! So it is still possible to take off the doors etc and reposition them?

Zach Wilson
pretty spectacular work

Jv
Very nice

Robin (WhiteGlint)
👀
Stunning work and presentation 👍

Robert Podkoński
I am just speechless here... Fantastic!

Neuling
Yes!

Dietmar Bogatzki
Awesome 👍

SimPlaMo
Excellent work!… that one is definitely on my list, but can imagine it's quite a challenge.

Bruno
Very nice 👍

Lochsa River
spectacular

Bobby Thumbs
Amazing paintjob

Spanjaard
amazing job

Michael Kohl
Everything you show here is way above average.

Allan Lowe
Just magnificent. Youre work is outstanding .I'm just about to start my attempt at this masterpiece. Wish me luck!!!

George Williams
Excellent work especially on the opening and closing doors.