News Feed
Amodel 1:48
Stefan L.添加了一个新相册
42 14 July 2023, 21:33
ChristianHallo Stefan, hab das selbe Modell im Regal. Bin gespannt wie deine wird, soweit schaut das richtig vielversprechend aus. Und ich bekomme bei deinen Bildern richtig Lust, den Bau der Messerschmitt ebenfalls zu starten!
21 July 2023, 18:10
Stefan L.@Christian Hallo Christian, bist jetzt sind mir bei dem Modell keinerlei Probleme aufgefallen, alles passt wunderbar zusammen , kann dir nur empfehlen das Modell zu bauen. Selbst wenn das Modell verglichen mit den neuen Tamiya oder Eduard Modellen weniger Details aufweist, macht es sehr viel Spaß diese Details selber hinzuzufügen und selbst wenn man die Details weglässt, ist das Modell sehr schnell gebaut und für den Preis meiner Meinung nach sehr zu empfehlen. Abgesehen davon sind die meisten neuen Bausätze der BF109 von der G Variante und nicht von der E Variante. Hoffentlich kann ich dich mit meinem Bau inspirieren, dein Modell auch anzufangen 🙂
22 July 2023, 09:35
ChristianSchaut sehr gut aus Stefan! Die Sache mit den Nieten für meine E hat der Vorbesitzer meines Kits mit einem kompletten Satz Nieten Decals von HGW gelöst. Für andere Projekte hab ich auch schon über ein solches riveting Tool nachgedacht?! Hab jetzt einmal geplant, das Modell über den Winter zu bauen. Allerdings will ich vorher noch meine UH-1B und die MH-60K zu Ende bringen, bzw. diese parallel dazu bauen. Bis Mitte November bin ich noch sehr mit unserem Hausprojekt und der Landwirtschaft eingeteilt. Auf alle Fälle bin ich auf das Resultat deiner Bemühungen gespannt!!!
26 August 2023, 06:27
Stefan L.@Christian Ein solches Nieten Set habe ich auch gesehen aber um ehrlich zu sein, ist es mir nicht wert, den Preis des gesamten Modells noch einmal für Nieten zu zahlen. Gut für dich, dass der Vorbesitzer sie schon gekauft hat, ich würde sie auf jeden Fall benutzen, bin schon gespannt wie deine Emil aussehen wird!
7 September 2023, 22:08
Stefan L.@Mark Lawrence since this is my first BF109, I'm no expert yet but I also like the Emil just simply due to the fact, that the Gustav variants seem to get build more often, which why I like seeing the Emil instead of yet another Gustav!
7 September 2023, 22:32
JohnLooks great Stefan and nice cockpit. Neat trick on the fishing line, thanks.
17 September 2023, 05:58
Stefan L.@John thank you for your nice words! Always happy to spread some tips! 🙂
18 September 2023, 06:53
Marcin DudekWow, thanks for the detailed description! I learned a lot only by reding. I'm looking forward for more.
18 September 2023, 06:58
Stefan L.@Marcin Dudek I really appreciate your comment Marcin! I wasn't expecting that someone really reads all the stuff I write but seems I was wrong! It makes me really happy that you found some useful tips even though this is just my second proper model and I am far from being a somehow experienced modeler. Take care and keep modeling 🙂
19 September 2023, 21:25
JohnFor the boundaries since it's straight edge you can just touch it up with a post it note pretty easily.
19 September 2023, 22:35
Stefan L.@John thanks for the tip! I would have masked it again but the post it method is much easier, didn't think of that, thanks alot!
20 September 2023, 08:33
Jennifer FranklinThat's a neat trick with the fishing line; lots of great detail on your work. Very nice work so far.
26 January, 07:26
Stefan L.@Jennifer Franklin thank you for the nice words 🙂 I'm really trying my best and hope that my increased experience will show at the end result, especially when compared to my first ever modelkit, the Eurofighter
27 January, 10:24
TH SCALE MODELS (Thomas Haberl)Looking good, especially knowing this is your second build. 1:48 is a good scale to start with. Thumbs up and keep modeling 👍
29 January, 11:55
Jesse11111想要这件
Star Trek The Next Generation
U.S.S. Enterprise NCC-1701-D Injected in Clear Plastic for Lighting AMT 1:1400
955/06 2019 新零件 18 July, 19:04
Jan Hoos添加了一个新相册
4 图片
Trumpeter U-boat
1:48
When finished i mount it to the wall, just on the waterline, i think. But first i must finish it!
12 8 July, 14:08
CaptGPFHoly cow! I didn't think it were even possible to make a sub kit that big! following!
8 July, 14:22
Jan HoosHahahahah no John, i will place it at the wall when finished. The wall is ready for it as you can see in the album
17 July, 10:07
JohnThat will look cool up there, just make sure it's secure as it might give you a concussion if it falls on you!
17 July, 14:41
gorby添加了一个新相册
13 13 July, 13:59
gorbyNew photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorbyThanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunterHoly moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorbyNo problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
Brian Hatak拥有此物
USS FFG Oliver Hazard Perry Class Detail up set
Pontos Model 1:350
35019F1 18 July, 19:02
Nehpets977拥有此物
BAe Hawk T.1A 100 Squadron Display Aircraft 1992-1994. 2 versions No 4 FTS 70th Anniversary 1921-1991 Abu Sueir Valley
Xtradecal 1:32
X32-037 18 July, 19:02
Tony G添加了一个新相册
24 5 July, 12:45
Tony GHi Giannis, no, used AK plastic putty to mask the sand lines and sprayed the green in between.
15 July, 20:25
Brian Hatak拥有此物
Antarctica Observation Ship
SOYA The Third Antarctica Observation Corps.Pontos Model 1:250
25001R1 2019 新模具 18 July, 19:02
Raphael Bernecole添加了一个新相册
77 19 December 2023, 08:05
MariusGreat progress, it will be a great model at the end. Is that the Aires resin cockpit set for the F-4F which you adapted?
18 April, 20:33
Raphael BernecoleThank you very much to everyone for your support and follow-up 🙂
@Marius : I had the SBS Models resin kit in stock for the Revell kit. This kit is well detailed but complicated to place in the Phantom. I recommend the Aires Kit, much superior in every way 😉
F-4 E/F Phantom - Cockpit Set (SBS Model 72004, 1:72)
19 April, 07:06
Jesse11111想要这件
Star Trek
Deep Space Nine Clear Edition with U.S.S. Defiant NX-74205 and Cardassian Keldon-Class Cruiser AMT 1:3300
AMT1245 2021 新零件 多主题 (3)18 July, 18:57
Trez Mackenzie添加了一个新相册
16 24 March, 07:49
Trez MackenzieThanks! The Eduard kits build themselves if you know the tiny issues. But I should not have attempted an Eduard this early. It is too nice a kit to practice on after a long hiatus.
17 July, 21:57
Audrius Nyep Eduard are great kits. however the new type decal is or at least for me was a challenge to remove that bloody top film...
18 July, 06:55
Trez MackenzieThanks Neuling! I'm still experimenting 😊
@Audrius a scalpel and tweezers are your friends
18 July, 10:10
Audrius N@Trez - on flat surface , yes not a big deal. However on uneven surface, like on top of rivets, air intakes etc. it caused me a pain. Almost complete roundels went off on my Spit MkV 🙁
18 July, 12:13
Juskifo添加了一个新相册
14 17 July, 23:04
Vintagemodelerlights shadows, weathering, tones its all a masterpiece, can i sak how did you degradated decals to look weathered???
18 July, 09:57
JuskifoC'est sympa Merci
Les décalcomanies "mam modelling" uk(mauvaises qualités, surdimensioné et couleurs infidèles) ont été patinés avec la couleur de base fortement dilué
J'ai également utilisé les decals eduard sur les entrées d'air
18 July, 12:28
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo