News Feed
daynary
想要这件
想要这件
Steam Locomotive BR86 DRG Wheels (Trumpeter 217)
E.T. Model 1:35
E35-048 17 September, 08:46
daynary
想要这件
想要这件
Steam Locomotive BR86 DRG Basic Set (Trumpeter 217)
E.T. Model 1:35
E35-046 17 September, 08:45
Ardian Prestreshi
添加了一个新相册
添加了一个新相册
8 17 September, 02:28
Denis Dogadov
There are really very few photos.
I liked the coloring, but there are questions about the technical part.
The ski holes on the lower surface of the engine hood were not supposed to be blind - they did not have a front wall, and these holes served to release cooling air.
There were transparent windows in the domes of the chassis niches.There were also landing flaps from below, which need to be more clearly highlighted
[img1]
[img2]
[img3]
There are really very few photos.
I liked the coloring, but there are questions about the technical part.
The ski holes on the lower surface of the engine hood were not supposed to be blind - they did not have a front wall, and these holes served to release cooling air.
There were transparent windows in the domes of the chassis niches.There were also landing flaps from below, which need to be more clearly highlighted
[img1]
[img2]
[img3]
17 September, 07:38
Spanjaard
great job. i would suggest to create a project and link this beauty to it, so it gets the right visibility.
@Denis, those seem to be flaws in the model itself, right?
great job. i would suggest to create a project and link this beauty to it, so it gets the right visibility.
@Denis, those seem to be flaws in the model itself, right?
17 September, 08:44
alessandro magrelli
添加了一个新相册
添加了一个新相册
24 15 September, 12:23
John
I love this! MiG-3 has always appealed to me. It didn't perform all that well, but it looked cool doing it.
I love this! MiG-3 has always appealed to me. It didn't perform all that well, but it looked cool doing it.
16 September, 20:12
alessandro magrelli
Thx John. You are right, operationally speaking a failure but still iconic.
Thx John. You are right, operationally speaking a failure but still iconic.
17 September, 07:29
Denis Dogadov
A typical mistake of most modelers and model manufacturers. The Mig-3 did not have a clearly defined binding on the front of the lantern, this part was simply glued together.
The fabric on the steering surfaces does not look at all like in a real airplane, it was necessary to do something about it on such a scale...
[img1]
[img2]
A typical mistake of most modelers and model manufacturers. The Mig-3 did not have a clearly defined binding on the front of the lantern, this part was simply glued together.
The fabric on the steering surfaces does not look at all like in a real airplane, it was necessary to do something about it on such a scale...
[img1]
[img2]
17 September, 07:59
Alexander Perov
👍Денис Хотел тоже написать про это .но уже устал напоминать и высылать фото.
👍Денис Хотел тоже написать про это .но уже устал напоминать и высылать фото.
17 September, 08:18
Denis Dogadov
Well, I've already been told that only laudatory reviews are allowed here
Well, I've already been told that only laudatory reviews are allowed here
17 September, 08:25
alessandro magrelli
Thanks Denis. I admit I didn't do an extensive preparatory work for the model, I guess there's way more inaccuracies I didn't notice in this work. I do really appreciate this kind of documented contributions👍👍
Thanks Denis. I admit I didn't do an extensive preparatory work for the model, I guess there's way more inaccuracies I didn't notice in this work. I do really appreciate this kind of documented contributions👍👍
17 September, 08:41
Ingo F
添加了一个新相册
添加了一个新相册
18 6 September, 12:02
Ingo F
Thank you guys! 🙂
@Michael, yes, this parts were scaled down to 1/72 and printed by me.
This parts were printed:
ERA: cults3d.com/de/model..era-bricks-two-types
Turret front ERA: cults3d.com/de/model..r-leopard-2a4-turret
Smoke Discharger, front Headlights, Peri and rear cross are from this set: cults3d.com/de/model..ene/leopard-2a4m-can
Antenna: cults3d.com/de/model..rial-mount-and-light
Running gear is from this kit and fits the Revell Leo 2 kits almost perfectly: cults3d.com/de/model..tailed-and-supported
Thank you guys! 🙂
@Michael, yes, this parts were scaled down to 1/72 and printed by me.
This parts were printed:
ERA: cults3d.com/de/model..era-bricks-two-types
Turret front ERA: cults3d.com/de/model..r-leopard-2a4-turret
Smoke Discharger, front Headlights, Peri and rear cross are from this set: cults3d.com/de/model..ene/leopard-2a4m-can
Antenna: cults3d.com/de/model..rial-mount-and-light
Running gear is from this kit and fits the Revell Leo 2 kits almost perfectly: cults3d.com/de/model..tailed-and-supported
6 September, 14:48
Robin (WhiteGlint)
Lot of metal and resin. Interesting to see ERA on a Leopard 2. 👀 👍
Lot of metal and resin. Interesting to see ERA on a Leopard 2. 👀 👍
17 September, 08:39
Luis Laranjeira
拥有此物
拥有此物
IDF Ma?agal Eitan early active prot. Merkava 2.B
Legend Productions 1:35
LF1421 17 September, 08:36
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo