News Feed
Ricardo Reis添加了一个新相册
16 图片
Sukhoi Su-27UBM (WIP)
1:48
Some advances on the intakes; acrylic putty was needed to fill the lateral gaps between the bottom and the top parts (wh...
3+ 14 20 October, 20:49
Jorge FerreiraÓ Ricardo achas mesmo que essas decals 3d têm bom aspecto ? Na foto não acho.
20 October, 20:56
Spanjaardthose 3D decals look good, but the details in the original cockpit look just amazing!
20 October, 21:19
Ricardo Reis@Jorge, têm sim... o problema é que o cockpit tem o detalhes ainda mais definido, é mesmo lindo, o sacana...
@Spanjaard, the details in the cockpit are more crisp than the details on the decals... it breaks my heart! 🙁
@Desert Marlin, yup, quite. :\
21 October, 13:21
Ben MYou might leave a comment on the 3d decal page so people know what they're getting in to.
21 October, 22:47
Ricardo Reis@Ben, with GWH this is always the case, I had to do the same thing with my F-15 some years ago; Eduard has done it better, because they always have parts with details and parts that are flat, for this purpose
21 October, 22:51
Ricardo Reis添加了一个新相册
7 图片
Sukhoi Su-35S (WIP)
1:48
Some advances on the intakes; acrylic putty was needed to fill the lateral gaps between the bottom and the top parts (so...
5+ 14 29 October, 01:48
Ricardo ReisWelcome Cristian; it'll be a slow build, together with the Su-27 I'm building simultaneously 🙂
29 October, 11:38
Frédéric Poupon添加了一个新相册
20 15 July, 19:22
BetterTimes-HenryAgree, very nice interior. Looking forward to the exterior paint and weathering 👍
25 September, 10:57
Armory 1:72
Simon O'Gorman添加了一个新相册
74 图片
Making the Moth
1:72
And there it is! I'd be embarrassed to say how long this took, and it's packed full of mistakes and semi-mended disaster...
项目: Tiger Moth
61 19 February 2023, 12:45
Simon O'GormanI felt very uncomfortable cutting out the fuselage sections - I'd never done that before - but with the doors dropped open it means the cockpit will be more open.
22 February 2023, 14:12
Simon O'GormanAh, cool! It's my first go at airbrushing and all going very slowly. But I'll get there in the end.
26 February 2023, 23:23
Alex KMe too... I've built the ancient-tool Airfix, but I have also bought the new one, and watching your work progress helps a lot.
9 April 2023, 18:27
Simon O'GormanAh, look forward to seeing how you go lads. I'm no expert I'm afraid but you may pick up some tips as to what not to do
🙂
9 April 2023, 19:39
Andy BallTerrific journalism on this build, I see the learning curve has yielded results! Bravo.
6 June 2023, 06:39
Simon O'GormanThanks Andy, I'm recording the all the disasters along with the little wins. And the learning curve has been dramatic!
6 June 2023, 16:33
Simon O'GormanThank you Ethan, and to everyone above. Encouraging comments are like a little shot adrenaline. They are all very much appreciated.
7 June 2023, 05:38
Simon O'GormanThanks Luke, to be honest I couldn't tell if the model was fiddly or I wasn't doing it right.
17 November, 17:54
Ben MI built that kit too, and it's tricky to get all the struts and such for the upper wing
17 November, 21:18
Simon O'GormanYeah, that was really tricky for me too, Ben. Huge learning curve! What I should have done was glue the outer struts to the bottom and dry-fitted the top until it was set - then glued the centre struts into the top wing, and put the two together. Getting this wrong can ruin the build.
17 November, 21:23
Ben MI did the center ones first, glued top wing on, and then fit the outboard ones: Leger VVC Batavia Tiger Moth | Album by Bourgeois Detailism (1:72)
17 November, 21:34
Simon O'GormanJust looked at your album Ben, a really nice build. Loved your prop and the rigging looks great. Very nice!
17 November, 23:20
Robert PodkońskiGreat job, Simon! Thanks for your suggestions - I intend to built one too.
18 November, 08:57
NickAGood outcome, this was the first biplane I had made for decades and it ended up looking like one too! I then built Airfix's 1/48 offering which goes together even better. I just need the courage to attempt some rigging.
18 November, 16:22
Simon O'GormanMe too Nick, need to summon some rigging courage for the next biplane. I don't feel ready, but I guess you probably never feel ready.
18 November, 16:30
Michael SchubertLove it! I just got the top wing set on mine and promptly dropped it and it fell into 3 pieces 🤦🏻♂️ turned out ok, but a close look shows its flaws haha, the colour scheme you chose is cool and it turned out great 👍
19 November, 08:13
Jakko 添加了一个新相册
27 图片
M4 (105 mm) HVSS
1:35
After puttying and sanding the seams, I painted the inside matt black and began adding strip around the top, first flat ...
13 28 October, 12:02
Jakko So far it's certainly been interesting 🙂 It's that I already had these parts and decided on this before Asuka announced their M4A3 (105 mm) kit, but I would advise anyone else wanting an M4 (105 mm) to just buy that kit and order an M4 engine deck from Asuka to put into it … (And make some other modifications, of course, like changing the rear hull to match.)
30 October, 09:30
Jakko Thanks. I just hope it matches up with the molded pattern reasonably well once there's some paint over it 🙂
30 October, 12:34
Pietro De AngelisFantastic scratching work,
i'm also admiring it on missing-lynx,
congrats!
19 November, 09:17
bughunter添加了一个新相册
8 图片
THE Street
1:24
My last built Ford A was allowed to test the road.
项目: A car
20 17 November, 16:36
Alexander Grivonevit absolutely does look like THE street, the realism is stunning 👍
17 November, 17:01
bughunterThank you mates! I am also absolutely satisfied with the result.
@Alexander From time to time I have done some 1:24 cars, typically from ICM.
The Benz Motorwagen is the best I think, also received an award. The newest was the Ford A released this year.
You can find them on my Projects filtered fro 1:24: bughunter
17 November, 17:19
bughunterThanks Erik!
Both are from ebay, see the selection box: https://ebay.de/itm/163637309021
Not the perfect quality, but usable.
17 November, 17:35
bughunterEspecially for Alex I made a picture with the Ford A. A 1:24 car fits well.
18 November, 19:50
TH SCALE MODELS (Thomas Haberl)Uhhhhh - that is beautiful … both, the model and the road 👌
18 November, 20:11
bughunterThank you very much Thomas!
The Ford is not new. I showed it here in June: Ford Model A Standard Phaeton Soft Top (1930s) | Project by bughunter (1:24)
18 November, 22:00
Patrick HagelsteinThat road segment looks absolutely stunning! Very well done and very realistic looking.
18 November, 22:12
Thomas S.添加了一个新相册
9 18 November, 11:06
Martin OostromWhat did the poor 308 do to get dressed up like this 😢
Still a great job Thomas.
19 November, 05:55
Lebloge添加了一个新相册
13 16 November, 12:09
DaveNice job. Looks great. I like how the supervisor decided that was time for a nap.
19 November, 07:11
Christian Abraham添加了一个新相册
22 14 October, 17:19
Christian AbrahamThanks.
More work is done and the Gefion is nearly finished. Just two more boats and some rigging
10 November, 13:38
Christian AbrahamThe project is done. Perhaps I have to redone the antenna. Bit besides this I'm happy with the outcome.
17 November, 16:20
Elias Papadimitriou添加了一个新相册
8 6 November, 14:49
Erwin Langlois想要这件
German Freikorps flamethrower squad
Copper State Models (CSM) 1:35
F35-045 19 November, 09:02
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo