News Feed
Mirko Römer
添加了一个新相册
添加了一个新相册
27 26 May 2022, 21:20
Simon Nagorsnik
Nice weathering!
You portrayed the Stryker well👍
Will there be a dmall dio for this?
Ps: The OKB tires are worth their money, aren't they?!😄
Nice weathering!
You portrayed the Stryker well👍
Will there be a dmall dio for this?
Ps: The OKB tires are worth their money, aren't they?!😄
4 June 2022, 19:15
Mirko Römer
Thanks Simon, I'm working on it 😀The tires are pretty good, but needed some work to make them fit. Probably it might be easier on the Academy kit. The ones provided by Trumpeter looked quite small and thin.
Thanks Simon, I'm working on it 😀The tires are pretty good, but needed some work to make them fit. Probably it might be easier on the Academy kit. The ones provided by Trumpeter looked quite small and thin.
4 June 2022, 20:59
Mirko Römer
Done. Can be seen live at this weekend's exhibition at Wiesbaden/ Mainz-Kastel.
Done. Can be seen live at this weekend's exhibition at Wiesbaden/ Mainz-Kastel.
24 June 2022, 13:21
Simon Nagorsnik
You did a good job on this dio mate!
Like all the details you`ve added
Thumb up 👍
You did a good job on this dio mate!
Like all the details you`ve added
Thumb up 👍
24 June 2022, 13:25
Mirko Römer
Thanks Simon for your highly appreciated comment. Better pictures during the weekend, as everything is stored in boxes now.😀
Thanks Simon for your highly appreciated comment. Better pictures during the weekend, as everything is stored in boxes now.😀
24 June 2022, 17:26
Mirko Römer
Thanks mates!! And thanks to the awesomne crew of PMC Main-Kinzig for having a stunning exhibition this year!
Thanks mates!! And thanks to the awesomne crew of PMC Main-Kinzig for having a stunning exhibition this year!
29 September, 17:56
Duster_d
添加了一个新相册
添加了一个新相册
3 图片
Ilyushin Il-2 Stormovik (TOKO\Zvezda)新的: 29 September, 17:58 1:72
I continued the project, while waiting for the missing part to be delivered by Zvezda.
4 21 September, 16:39
Transall NG
Hello! Take a seat !
A mix of two TOKO references. A Zavod 18 aircraft with metallic wing.
Well, i guess your father knows that any aircraft can be critisized, as they are always used far over what they were built for...
Good luck !
Hello! Take a seat !
A mix of two TOKO references. A Zavod 18 aircraft with metallic wing.
Well, i guess your father knows that any aircraft can be critisized, as they are always used far over what they were built for...
Good luck !
21 September, 19:02
Duster_d
@Transall NG, my father just got caught up in a wave of "Messerization" in the 1990s. After the collapse of the Soviet Union, a flood of articles about the Luftwaffe flooded into Russia, which was like an ideological distraction. Many people dreamed of Messerschmitt and Focke-Wulf aircraft, considering them the best while simultaneously criticizing Soviet aircraft. Perhaps this was successful because in Soviet times, the qualities of German and Allied aircraft were underplayed, and there was little information about them available.
@Transall NG, my father just got caught up in a wave of "Messerization" in the 1990s. After the collapse of the Soviet Union, a flood of articles about the Luftwaffe flooded into Russia, which was like an ideological distraction. Many people dreamed of Messerschmitt and Focke-Wulf aircraft, considering them the best while simultaneously criticizing Soviet aircraft. Perhaps this was successful because in Soviet times, the qualities of German and Allied aircraft were underplayed, and there was little information about them available.
22 September, 08:24
Duster_d
A representative of Zvezda contacted me and, after clarifying some details, informed me that they would send me the missing part of the kit after October 1st. It pleases me.
A representative of Zvezda contacted me and, after clarifying some details, informed me that they would send me the missing part of the kit after October 1st. It pleases me.
25 September, 12:03
Greg Baker
添加了一个新相册
添加了一个新相册
43 19 June, 14:33
Greg Baker
First print mostly successful. I will need to rework the thickness of the walls and the support struts for the roof. Much too thin.
First print mostly successful. I will need to rework the thickness of the walls and the support struts for the roof. Much too thin.
19 June, 14:35
LucLuke B
3d printing, I wouldn't know where to start. Is the ami 6 a file you found online?
3d printing, I wouldn't know where to start. Is the ami 6 a file you found online?
19 June, 19:39
Greg Baker
I did find it online, but was a little disappointed with the quality. It required a lot (and will need more) work to be able to print it. I mainly have to increase the thickness of the rear trunk area. The strange overhang roof in the rear needs to be sturdier as well.
I did find it online, but was a little disappointed with the quality. It required a lot (and will need more) work to be able to print it. I mainly have to increase the thickness of the rear trunk area. The strange overhang roof in the rear needs to be sturdier as well.
19 June, 19:59
Greg Baker
The second printing went much better. I made a mistake though, I forgot to add the support to both sides of the rear roof struts. Luckily one side seems to be strong enough to hold everything, and with a little paint I don't think the thin part will be visible.
The second printing went much better. I made a mistake though, I forgot to add the support to both sides of the rear roof struts. Luckily one side seems to be strong enough to hold everything, and with a little paint I don't think the thin part will be visible.
20 June, 14:08
Greg Baker
Good timing. After a bit of a summer break spent watching football, olympics, and playing video games with my son... I just started back at the modelling desk. After clearing up a couple of other, smaller, Tintin-related projects, I'm almost ready to tackle this one again.
Good timing. After a bit of a summer break spent watching football, olympics, and playing video games with my son... I just started back at the modelling desk. After clearing up a couple of other, smaller, Tintin-related projects, I'm almost ready to tackle this one again.
21 August, 14:09
Greg Baker
With the Hawker Hart off the bench and on the shelf… I guess it's time to tackle this one again. Getting the colour right was tricky. I finally settled on a 10:5:1 ratio of Tamiya XF-2 White, X-14 Sky Blue and XF-18 Medium Blue. Not perfect, but close enough I think.
With the Hawker Hart off the bench and on the shelf… I guess it's time to tackle this one again. Getting the colour right was tricky. I finally settled on a 10:5:1 ratio of Tamiya XF-2 White, X-14 Sky Blue and XF-18 Medium Blue. Not perfect, but close enough I think.
18 September, 05:30
Greg Baker
Thanks Cuajete. It might be a LITTLE bit darker than I was going for, but close enough for me. It looked lighter in the airbrush cup, but I suspect the darker undercoat is at play here.
Thanks Cuajete. It might be a LITTLE bit darker than I was going for, but close enough for me. It looked lighter in the airbrush cup, but I suspect the darker undercoat is at play here.
18 September, 17:54
Greg Baker
Got the windows in place. I used an old iPhone screen protector plastic cut to fit. For the interior windows I glued it them in place with some very small dabs of CA glue and then a brush of Future. However, for the open doors, I used the thinner "peel off plastic" that's supposed to keep the iPhone protector nice and clear until it's applied. Then I dipped them in Future and applied them directly to the doors. Let's hope there's enough adhesion once the Future dries. It SHOULD work, since I did the same thing on my Tintin Model T project for the windscreen. But that was flat… these have a bit of a curve to them.
Got the windows in place. I used an old iPhone screen protector plastic cut to fit. For the interior windows I glued it them in place with some very small dabs of CA glue and then a brush of Future. However, for the open doors, I used the thinner "peel off plastic" that's supposed to keep the iPhone protector nice and clear until it's applied. Then I dipped them in Future and applied them directly to the doors. Let's hope there's enough adhesion once the Future dries. It SHOULD work, since I did the same thing on my Tintin Model T project for the windscreen. But that was flat… these have a bit of a curve to them.
20 September, 06:06
Greg Baker
Looks like the windows are holding. Next up… painting some of the details.
Looks like the windows are holding. Next up… painting some of the details.
20 September, 13:48
Greg Baker
I just realized that I've been looking at the colour scheme from the album - specifically the scene that takes place at night where Professor Calculus is taken down the stairs and dump unceremoniously into the front seat of the Citron Ami 6 by a rogue wheelchair, blasting the doctor out the passenger door in the process. However... since it takes place at night, the colouring is different (i.e. darker) than it should be in the light of day. Now I feel like I screwed up the paint job!
I just realized that I've been looking at the colour scheme from the album - specifically the scene that takes place at night where Professor Calculus is taken down the stairs and dump unceremoniously into the front seat of the Citron Ami 6 by a rogue wheelchair, blasting the doctor out the passenger door in the process. However... since it takes place at night, the colouring is different (i.e. darker) than it should be in the light of day. Now I feel like I screwed up the paint job!
26 September, 15:46
Greg Baker
Basically done. Just a couple of tiny bits to add.. like the license plate!
Basically done. Just a couple of tiny bits to add.. like the license plate!
29 September, 05:14
Greg Baker
I took a page out of my Spitfire build. Not quite the huge cloud of leaflets needed this time, but basically the same technique to show the poor airborne doctor losing all his documents!
I took a page out of my Spitfire build. Not quite the huge cloud of leaflets needed this time, but basically the same technique to show the poor airborne doctor losing all his documents!
29 September, 16:23
Arjan Ouwendijk
想要这件
想要这件
Bat Signal to match Polar Lights 1966 Batmobile other scales available on request
Hendie's Scale Parts 1:25
BMB25-1 2024 新模具 29 September, 18:40
Mina Ro
Its about time we got a new tool of this famous vehicle.Light years more detail than the ancient Tamiya kit, and it includes a driver figure! A must have kit for me.
Its about time we got a new tool of this famous vehicle.Light years more detail than the ancient Tamiya kit, and it includes a driver figure! A must have kit for me.
14 September, 21:27
Zsolt Czegle
添加了一个新相册
添加了一个新相册
34 6 September, 18:40
Zsolt Czegle
This is just a quick fun project to kick back after a few months off....
This is just a quick fun project to kick back after a few months off....
6 September, 18:41
bughunter
Oh, an Unimog!
I really like Unimogs and I'm sure you will convert this one into a golden winter Unimog too 👍
Golden will not be the colour of the Unimog, but of the medal you get for it!
Oh, an Unimog!
I really like Unimogs and I'm sure you will convert this one into a golden winter Unimog too 👍
Golden will not be the colour of the Unimog, but of the medal you get for it!
16 September, 20:51
Zsolt Czegle
Thank you mates for your kind words!
Łukasz: the stripes are masked and airbrushed. Not handpainted! 😉
Thank you mates for your kind words!
Łukasz: the stripes are masked and airbrushed. Not handpainted! 😉
19 September, 18:08
Łukasz Gliński
Even more respect for cutting all these stripes, I had to do the same on my Panther and I know how tedious it is 👍
Even more respect for cutting all these stripes, I had to do the same on my Panther and I know how tedious it is 👍
19 September, 18:42
Zsolt Czegle
Thank you mates for your kind words!
Łukasz: the masking was more fun than pain!
Thank you mates for your kind words!
Łukasz: the masking was more fun than pain!
29 September, 16:45
Frank Brzobohaty
添加了一个新相册
添加了一个新相册
45 7 September, 01:54
Frank Brzobohaty
Base painting done. I need to learn to do the continuous line camo for the next night fighter. Any good guides for 1/72 scale? I am good enough to do it at 1/48 but just not skilled for 1/72.
Base painting done. I need to learn to do the continuous line camo for the next night fighter. Any good guides for 1/72 scale? I am good enough to do it at 1/48 but just not skilled for 1/72.
22 September, 02:00
Łukasz Gliński
Excellent,job 👍
I wasn't aware of this two-seater version, not sure now which one I like more the Anteater or this one 🙂
Looking at the second canopy, I might call it 1,5-seater 😉
Excellent,job 👍
I wasn't aware of this two-seater version, not sure now which one I like more the Anteater or this one 🙂
Looking at the second canopy, I might call it 1,5-seater 😉
29 September, 18:14
Edouard Carr
添加了一个新相册
添加了一个新相册
9 12 August, 17:43
Edouard Carr
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Maxime Leca
添加了一个新相册
添加了一个新相册
13 10 September 2023, 16:18
John
Very very good build! Detailing and figures are awesome. The camo on the pants/blouse is really great. Must have taken a while! Cockpit looks amazing too. 👍 can't wait to see it painted.
Very very good build! Detailing and figures are awesome. The camo on the pants/blouse is really great. Must have taken a while! Cockpit looks amazing too. 👍 can't wait to see it painted.
21 July, 15:42
Eric Scott
想要这件
想要这件
Bat Signal to match Polar Lights 1966 Batmobile other scales available on request
Hendie's Scale Parts 1:25
BMB25-1 2024 新模具 29 September, 18:34
Omar Rashash
想要这件
想要这件
Propeller F6F-3/5 "Hellcat", F4U-1D "Corsair", F7F "Tigercat", TBF/TBM "Avenger"
Vector 1:48
VDS48-144 2024 新模具 多主题 (1!!)29 September, 18:33
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo