News Feed
![](/profiles/img/11807-s.jpg)
添加了一个新相册
114 19 May, 16:00
![](/profiles/img/18052-335-s.jpg)
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
24 May, 09:05
![](/profiles/img/15941-384-s.jpg)
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
24 May, 13:25
![](/profiles/img/11807-s.jpg)
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
24 May, 15:19
![](/profiles/img/11807-s.jpg)
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
24 May, 15:25
![](/profiles/img/10307-421-s.jpg)
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
31 May, 15:51
![](/profiles/img/11807-s.jpg)
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
31 May, 19:11
![](/profiles/img/11807-s.jpg)
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
10 June, 17:42
![](/profiles/img/25429-812-s.png)
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
10 June, 18:29
![](/profiles/img/46074-728-s.jpg)
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉
23 July, 12:56
![](/profiles/img/48545-484-s.jpg)
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂
Is the "Hobbyboss" in the album title a joke or a mistake?
23 July, 14:32
![](/profiles/img/21096-573-s.jpg)
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....
27 July, 07:59
![](/profiles/img/11807-s.jpg)
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.
29 July, 07:51
![](/profiles/img/12962-s.jpg)
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂
3 August, 18:43
![](/profiles/img/11836-205-s.jpg)
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?
6 August, 14:04
![](/profiles/img/11807-s.jpg)
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂
6 August, 16:41
![](/profiles/img/user-s.jpg)
I am starting to like the Intruder and I definitely like your model of it.
7 August, 10:14
![](/profiles/img/57594-145-s.jpg)
That looks spectacular! I really like the folded wings! And the painting with that careful weathering is beautifully done. I wouldn't have been surprised if it was 1:48.
8 August, 13:29
![](/profiles/img/115476-780-s.jpg)
添加了一个新相册
12 7 August, 11:30
![](/profiles/img/115476-780-s.jpg)
Thanks Ekki! That Kit is really, really terrible! Between building and Paintig i thought about buying the Hobby Boss kit...
8 August, 05:12
![](/profiles/img/20442-422-s.jpg)
Nice work!
If you go to 'Manage' and the 'Advanced options' you can change the orientation of your photos.
8 August, 12:57
![](/profiles/img/57594-145-s.jpg)
Great little helo! I built the Hobby Boss version some time ago, it's a great little kit. Yours look a bit more challenging, but you ended up with a very attratctive model!
8 August, 13:27
![](/profiles/img/14709-772-s.jpg)
添加了一个新相册
43 图片
Build log![View album, image #43 View album, image #43](/albums/img/6/1/7/1781617-14709-89-720.jpg)
1:72
So what do you think? Time to remove the masks from the windows?
项目: Mi-6 VKP
77 18 April, 17:24
![](/profiles/img/48972-166-s.jpg)
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
23 April, 19:04
![](/profiles/img/12266-435-s.jpg)
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
24 May, 17:06
![](/profiles/img/14709-772-s.jpg)
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
24 May, 18:54
![](/profiles/img/12266-435-s.jpg)
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
24 May, 21:21
![](/profiles/img/user-s.jpg)
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
2 June, 19:37
![](/profiles/img/10307-421-s.jpg)
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
15 June, 14:45
![](/profiles/img/28845-385-s.jpg)
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
15 June, 16:42
![](/profiles/img/121752-978-s.jpg)
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
22 June, 17:03
![](/profiles/img/14709-772-s.jpg)
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
8 August, 08:42
![](/profiles/img/23938-707-s.jpg)
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
8 August, 13:08
![](/profiles/img/57594-145-s.jpg)
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
8 August, 13:25
![](/profiles/img/10307-421-s.jpg)
添加了一个新相册
26 31 May, 15:38
![](/profiles/img/10307-421-s.jpg)
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.
2 June, 11:10
![](/profiles/img/10307-421-s.jpg)
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎
5 June, 18:16
![](/profiles/img/10307-421-s.jpg)
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)
5 June, 18:51
![](/profiles/img/11266-s.jpg)
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.
15 June, 07:23
![](/profiles/img/10307-421-s.jpg)
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.
23 June, 15:27
![](/profiles/img/10148-258-s.jpg)
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!
23 June, 15:30
![](/profiles/img/125872-847-s.jpg)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍
24 June, 14:07
![](/profiles/img/10307-421-s.jpg)
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.
3 July, 17:07
![](/profiles/img/10307-421-s.jpg)
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.
13 July, 20:27
![](/profiles/img/10307-421-s.jpg)
Hey - thank you Roland for your feedback. That gives motivation of course 🙂
14 July, 16:01
![](/profiles/img/10148-258-s.jpg)
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂
14 July, 17:20
![](/profiles/img/57594-145-s.jpg)
添加了一个新相册
41 图片
Yak-12 - Amodel![View album, image #41 View album, image #41](/albums/img/9/4/0/1781940-57594-81-720.jpg)
1:72
Model primed with Badger Stynylrez primer, using the H&S Infinity 0.4 mm needle at 25 psi. The primer revealed a few bad...
项目: Yak-12 - Amodel
28 5 July, 07:59
![](/profiles/img/13641-502-s.jpg)
Me 3, I have to see that! Still procrastinating mine 😄
Thomas, are you considering getting rid of the decal with my support perhaps? 😉
26 July, 20:14
![](/profiles/img/57594-145-s.jpg)
Łukasz, I am not going to use the provided decal sheet, so if you want it, just PM me with your address and I can post it.
26 July, 21:48
![](/profiles/img/57594-145-s.jpg)
(And for everybody else with knowledge about the different versions of the Yak-12, yes, I am aware of the differences between the A-version in the kit and the R-version used by the Hungarian People's Army. But since I am not able to scratch build the entire wing and empennage structure, let's just call it artistic license.)
28 July, 11:08
![](/profiles/img/57594-145-s.jpg)
Thank you very much, dear gentlemen for your attention and encouraging words!
31 July, 14:48
![](/profiles/img/user-s.jpg)
Admiring your skills, and learning from your problem-solving, Thomas. Transforming an A-Model kit adds to the challenges 😉
4 August, 15:36
![](/profiles/img/57594-145-s.jpg)
Thank you Michael, Nicolas & Bruce for your interest and compliments! This kit is actually not quite as bad as some other Amodel kits I have built - the designers have created some pretty nifty solutions here! If anything, it is a bit unforgiving - make one small mistake and you can be sure that it will keep coming back to kick you.
5 August, 20:35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo