News Feed
J35J
添加了一个新相册
添加了一个新相册
18 图片
SAAB S-17BS新的: 6 October, 15:04 1:48
Engine painted & weathered, ready for assembly
项目: Saab S-17BS
24 7 June, 15:09
J35J
Initial test fitting started. Will require more sanding and putty that expected for such a new kit.
Initial test fitting started. Will require more sanding and putty that expected for such a new kit.
13 July, 11:38
John
Cool subject and nice start 👍 Test fitting is half the "fun" on these limited run kits.
Cool subject and nice start 👍 Test fitting is half the "fun" on these limited run kits.
15 July, 03:40
J35J
Thanks John, test fitting can be quite rewarding for the rest of the build if you take your time and have some patience.
Thanks John, test fitting can be quite rewarding for the rest of the build if you take your time and have some patience.
15 July, 11:03
Mr D
添加了一个新相册
添加了一个新相册
63 图片
Romanian lAR-80 Fighter 新的: 6 October, 13:46 1:48
Just the underside decals to do next, then a clear coat... really for a oil wash.
项目: Hobbyboss IAR-80
26 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
18 September, 19:29
Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
18 September, 19:59
NICOLAS GRANDMONTAGNE
添加了一个新相册
添加了一个新相册
21 1 September, 16:49
NICOLAS GRANDMONTAGNE
Rivetage terminé avec les rivets Eduard.
Riveting completed with the Eduard Decals.
Rivetage terminé avec les rivets Eduard.
Riveting completed with the Eduard Decals.
6 October, 17:12
Ferenc Sarka
The tail rotor is a masterpiece! May i ask the brand of the crew? Keep going. It will be a superb Apache.
The tail rotor is a masterpiece! May i ask the brand of the crew? Keep going. It will be a superb Apache.
6 October, 17:24
Bozzer
添加了一个新相册
添加了一个新相册
4 11 August, 08:01
Bozzer
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
11 August, 08:07
Bozzer
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
2 October, 07:45
Bozzer
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
5 October, 23:24
Martin Oostrom
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
6 October, 07:16
Nigel Chapman
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
6 October, 08:34
Bozzer
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
6 October, 16:24
Mr D
Looking great 👍
What is it made from??
I've never come across a build like this??
Looking great 👍
What is it made from??
I've never come across a build like this??
6 October, 18:44
Alejandro Vucko
添加了一个新项目
添加了一个新项目
2 6 October, 18:32
Snake Plissken
One of the best things about this site (scalemates) is that it exposes one to a lot of previously unknown airplanes (cars, tanks, ships, helicopters etc. too). This a pretty sleek looking plane -- thanks for sharing and post plenty of photos! 😎
One of the best things about this site (scalemates) is that it exposes one to a lot of previously unknown airplanes (cars, tanks, ships, helicopters etc. too). This a pretty sleek looking plane -- thanks for sharing and post plenty of photos! 😎
6 October, 18:43
Alex Tomb
拥有此物
拥有此物
1975
Martini Brabham BT44B FIA Formula 1 World Championship 1975 Tamiya 1:12
12042 (TAM12042) 2021 新零件 6 October, 18:42
Oliver Peissl
添加了一个新相册
添加了一个新相册
32 4 October, 02:00
Gary Victory
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
4 October, 06:36
Tobias Lewandovski
添加了一个新相册
添加了一个新相册
6 25 February, 18:16
Snake Plissken
This is a good kit even though it started life as a motorized kit. The real rubber tires and posable front wheels are a definite bonus.
This is a good kit even though it started life as a motorized kit. The real rubber tires and posable front wheels are a definite bonus.
6 October, 18:40
Paul Gallagher
想要这件
想要这件
Mitsubishi A6M5b Zero Fighter Type 52 Otsu `653rd Flying Group´ Limited Edition
Hasegawa 1:32
08259 2022 新零件 6 October, 18:37
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=zh
35
35
/zh/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo