Detail Master Distributor kit查看: 幻灯片 平铺 名单 1January 14, 2024Firing order. 2January 14, 2024Testing with a 1mm section 3January 14, 2024Stretched out inner diameter with a sewing pin 4January 14, 2024I inserted the wire into a hypodermic. This is what was left over from making an antennae. The diameter was perfect for the wire and allowed me to nearly sew with it. 5January 14, 2024With the wire extended. 6January 14, 2024The stretched "boot" 7January 14, 2024Fits like a dream and I did not need to worry about the wire flexing at all. 8January 14, 2024 9January 14, 2024Tahdah 10January 14, 20244mm section of Boot material. I cut a 50degree section from it and stretched on pin. 11January 14, 2024Grab the 1mm end of angled boot to bend 12January 14, 2024Incerted the wire following above process. 13January 14, 2024Finished distributor end 14January 14, 20248 wires and the larger black which was not in the kit. Donated from a USB mouse cord ( i save everything) 15January 14, 2024Okay, I got them in there. Just need glue and to lay out there they go. 评论14 January, 00:12Album infoMy thought process.Detail Master Plug wires15 图片1:24已完成所有相册查看所有相册 »