P-51D in progress + completed
评论
110 10 June, 22:58
Jakub FialaThank you, mates!
Alec, correct deduction 👍 I see that you are not only a great modeler, but also an experienced detective 😄
Just to clarify, I will not build the new edition in 1:72 scale, but the 1:48 kit, which I have had in my stash for some time.
11 June, 11:09
Mr DNice metal finish 👌.
Glad you showed paints,
I'm struggling to find a good white paint that doesn't need a stupid amount of coats to look white... Any recommendations from anyone be appreciated.
Smart Mustang scheme 👍
11 June, 20:35
Jakub FialaThank you Nicolas and Mr D!
to Mr D: I use Tamiya LP and Gunze H aplied in several thin layers.
12 June, 13:41
CaptGPFI agree with Jakob, Tamiya LP white is much easier for me to use. Another trick is to black base the part first, and then lightly coat on the white. For some odd reason, it's easier for me to avoid over-spraying white on that.
12 June, 16:09
ClementMr Surfacer 1500 White is also a good option if you need a white "paint" with high coverage.
You can polish it afterwards or layer a coat of regular white paint if need be.
Being 1500, it's pretty smooth anyway.
Great mustang, Jakub. I'm looking forward to see it done 🙂
12 June, 16:45
Moreno BaruffiniWell, since I'm also building a p-51 (different molds), I can only say that I have still to learn and practice a lot 🙂
12 June, 19:13
Jakub FialaDík, Máro! V pondělí ho dotáhnu na klub. Stojím před velkým dilematem a budu potřebovat hromadnou konzultaci 😄
13 June, 11:17
Sergej IGreat looking little bird! What did you coat over the alclads with? If anything?
20 June, 13:35
Jakub FialaThank you, Sergej!
There is no coat over any color. The silver color on wings (LP-11) is polished, Alclads are untouched. I hope no varnish is needed. But i will see after decals....
21 June, 11:49
Sergej IThank you for the answer... brave, hoping all goes well and looking forward for results 👍
21 June, 12:51
Patrick HagelsteinThe decals do look stunning! Did you encounter any issues with setting solutions on the bare NMF parts?
25 June, 08:08
Jakub FialaThank you, Patrick. Luckily, no problem occurred with the setting solutions. But the decals are not fully set in panel lines yet. Photos are taken immediately after applying the decals. It is not visible on pictures, but there is still a lot of work to do.
25 June, 11:53
Jakub FialaThank you, gentlemen!
I´ve uploaded first pictures of a finished model. I hope, i will be able to present the whole gallery soon.
1 August, 12:24
Jakub FialaThanks a lot, mates, for your kind comments!
Finally i uploaded a set of photos of finished model.
20 August, 23:21
Spanjaardwow, fantastic job. Alclad still looks fantastic after all the decals, detal setting weathering etc, simply perfect. and no clear varnish, amazing.
21 August, 10:50
Patrick HagelsteinI totally agree with Spanjaard! The finish looks immaculate! Good to know that Alclad can withstand a beating.
21 August, 11:17
Jakub FialaThank you very much, mates! I'm really happy, that you like it. Of course, the quality of this kit is not the same as the new Arma hobby or Eduard kits, but finally, it looks like a Mustang 🙂
To Spanjaard and Patrick: yes, Alclads are very good. But be careful, not all Alclads are the same. For example polished aluminium or airframe aluminium ( which i used for external tanks) are not resistant to weathering agents and need to be varnished! I also had to overspray decals on the fuselage with Tamiya LP- 24 semi gloss clear, because thare were visible edges of decals. But that's not a problem of alclad, it's a problem of decals.
21 August, 17:47
Spanjaardthanks a lot for the info Jakub, I was wondering what I did wrong in my own P-51.... I guess my only error was to use airframe aluminium in most of the airplane 😄 😄
well, I believe it was my first use of Alclad 😉
21 August, 19:17
Patrick HagelsteinThank you for the detailed explanation, Jakub! Very good to know! 👍🏼
26 August, 21:21
