BMW R100S - 1978 - WIP

1
July 2, 2015
Step 1: painting the bodyparts. I used Tamiya TS-17 Gloss Aluminium, which I oversprayed with Tamiya TS-74 Clear Red. Finally I sprayed the black parts with Tamiya TS-14 Gloss Black. Next I fixed the decals and finally I applied 3 clear coats.
2
July 21, 2015
Step 2: assembly of the frame. The instructions suggest to assemble the engine first, and then fix it between the frame halves. I decided to assemble the frame first (and spray it black), to fix the engine afterwards with real bolts (green arrows).
3
July 21, 2015
Dry fit of the gas tank and seat support. The engine block still needs a weathering of course.
4
August 11, 2015
The engine block was weathered for more realism.
5
August 11, 2015
I tried to copy what I saw on the reference pics; an engine which is well taken care off, but with some oil stains and light weathering tracks.
6
August 11, 2015
This part is not present in the kit, so it was scratchbuilt. The coils will be hidden under the gas tank, so I didn't spent too much time detailing them, but still I tried to make it look realistic.
7
August 11, 2015
Now the bike is ready to receive the scratchbuilt part.
8
August 11, 2015
Here the coils are in place, and I lined up all the other engine parts as well to give you an idea of the next building step.
9
August 11, 2015
Lets' zoom in on these parts: they are all pre-assembled, painted and weathered because it will be hard to reach them once they are in place. The plastic chromed push-rods will not be used, I replaced them by metal parts.
10
August 11, 2015
Not only the coils were added, I also added the bolts which hold the rear suspension in place and which were absent.
11
August 11, 2015
Now I can finally fix the engine parts in place.
12
August 11, 2015
I start with the large cilinders, and the carburettors.
13
August 11, 2015
Next the other parts such as wiring and tubing is installed.
14
August 11, 2015
Finally the battery was put in place as well.
15
August 12, 2015
Next up is the swingarm. First I fix the rear brake, brake disc and rear wheel in place.
16
August 12, 2015
Next I put the rear fender in place.
17
August 12, 2015
In order to keep the bike in balance, now is a good time to fix the central support as well.
18
August 12, 2015
And of course the rear shocks can't be left away either. I replaced the funny looking chromed plastic parts by scratched shocks following the reference pics as a guide.
19
August 12, 2015
Once that is all cleared, we have a firm base on which we can continue the build. Now I fix all the wiring and tubing which will be visible once the bike is finished. Note that the fuel lines are still attached to each other; they will be cut later on.
20
August 12, 2015
Close-up of the engine and its wiring.
21
August 12, 2015
The tire treads were dry brushed as well to pick out the quite nicely looking raised sidewall and tread detail.
22
August 12, 2015
At the front I installed the radiator which is not present on all standard BMW R100S bikes, but since it was available in the kit I might as well use it.
23
August 14, 2015
The rear end of the bike was finished. I tried to simulate the taillight's interior with BMF which I pushed into the housing with a cotton swab. I think it turned out well.
24
August 14, 2015
All what was left to do now are the licence plate and the reflector. I replaced the plastic bolts by aftermarket metal bolts.
25
August 14, 2015
At the front I still had to fix the horns. I drilled them out en reshaped them to give them a realistic look since the kit parts were flat at the front.
26
August 14, 2015
Next it was the front fork's turn. I replaced the plastic injected brake lines by metal ones for more realism.
27
August 14, 2015
Same exercise at the right hand side. Once the wheel is fixed into the front fork I could also put the headlight and blinkers in place.
28
August 14, 2015
Then I concentrated on the handle bars. The large plastic cover unfortunately hides a lot of the detail, but there are still some switches and the dials to be looked at. I fixed some real meters over the dial decals and covered them up with epoxy glue.
29
August 14, 2015
Now all the parts I need to transform the semi-bike in a real motorcycle are ready to be assembled.
30
August 14, 2015
And that looks like this. The handle bars are still to be fixed, first I take some pictures of all sides.
31
August 14, 2015
32
August 14, 2015
33
August 14, 2015
34
August 14, 2015
Next I fix the handle bars in place and I connect all the wiring to the dials and handles. The completion is coming nearer...
35
August 14, 2015
36
August 14, 2015
37
August 14, 2015
38
August 15, 2015
Thanks to Wim van der Luijt I could correct an error in the fuel configuration; now the two fuel lines are interconnected like it should be.
39
August 15, 2015
Same exercise at the other side of course.
40
August 15, 2015
Next I could fix the gas tank and connect the fuel lines; I also fixed the seat support and the seat itself.
41
August 15, 2015
Before we will be fixing the cowling I couldn't resist to take a few shots of the bike without the cowling...
42
August 15, 2015
The missing exhausts are very striking here...
43
August 15, 2015
But they are next on the to-do list, so they won't have to wait for very long anymore...
44
August 15, 2015
Rear view. Also still to do is to correct the numerous spots where the paint is chipped because of the handling the bike while fixing parts... I'll do that once the bike is completed.
45
August 15, 2015
For instance, the aluminium painted fins of the cilinder heads always get chipped because I touch them when I am working at the BMW...
46
August 15, 2015
The cowling was painted a while ago, but the windscreen still had to be done. So I sprayed it with Tamiya TS-71 Smoke from the airbrush.
47
August 15, 2015
Next I fix the windscreen to the cowling, and all what's left to do is to punch 10 bolts and fix them onto the windscreen.

1 2 July 2015, 07:20

Martien Lourens
Great paint work. 👍👍

2 July 2015, 07:44

Guy Golsteyn
Thanks Martien! I still need to polish it though, but first I will let the clear coats dry for a week😉

2 July 2015, 07:51

Jeffrey Riedesel
Yeah GREAT PAINT!

2 July 2015, 09:02

Kerry COX
Does it come with the Keys. ? 🙂

2 July 2015, 09:14

Wim van der Luijt
That is a very hard finish to get right in 1:1 scale, I've seen some pretty poor jobs on both the 100S and 90S. I think you have done a good job on this replica!

2 July 2015, 12:54

Christian Ristits
What a great paintjob, Looks like parts for the real bike! Congrats!

2 July 2015, 13:42

Guy Golsteyn
Thanks guys! I hope I don't mess up the rest of the build now...😉

2 July 2015, 14:28

Pavel Pinzhin
Is this wrong that the photo of painted model parts kinda ignites the desire to eat them?.. 😄

Fantastic finish! Eager to see the whole model!

2 July 2015, 15:01

Sven Schönyan
Really nice paintwork! Chapeau!!!

2 July 2015, 15:45

Gordon Sørensen
Very Nice looking paintwork Guy! Top notch!

2 July 2015, 18:02

Bill Gilman
Superb paint! What do you use for a clear coat?

2 July 2015, 18:08

Guy Golsteyn
@Bill : Gunze Sangyo B-501 Topcoat Gloss 🙂

[img1]

2 July 2015, 18:56

Bill Gilman
Thanks Guy! Believe it or not, I have a couple cans in my stash. I bought them many, many years ago but have never used them. Now that I see the results you've achieved, I will give them a try. 🙂

2 July 2015, 20:06

Bill Gilman
Unstable? Sounds like the guy holding the can (me)! Thanks for the advice. 🙂

3 July 2015, 00:21

Guy Golsteyn
Back from holidays, I made some progress...

21 July 2015, 18:34

Kerry COX
A truly stunning result Guy. 🙂
You have set the bar very high old mate. 🙂 👍

21 July 2015, 19:02

Dave Adel
Spectacular. Love it. Can not wait for more.

22 July 2015, 04:41

Martijn Kuijpers
Lovely paint work Guy!

22 July 2015, 06:37

Burkhard D
Immaculate paintjob, very attractive. 👍👍👍😎

11 August 2015, 18:34

Guy Golsteyn
The engine has been installed, new pics available😉

11 August 2015, 18:50

Kerry COX
A real credit to your skills Guy.
I wish my R1150R was that simple. 🙂

11 August 2015, 19:55

Christian Ristits
Cant wait to See it finished! Cheers!

11 August 2015, 20:32

soheil moghisi
Perfect.really nice.

12 August 2015, 07:05

Rob van Dodewaard
Ilove this color great build so far

12 August 2015, 07:10

Guy Golsteyn
Thanks guys😉

12 August 2015, 12:14

Roberto Rocat
Beautiful work on a classic subject 👍

12 August 2015, 16:36

Guy Golsteyn
More progress was made, as well as some new pics😉

12 August 2015, 18:48

Roberto Rocat
Did you use any masks on the body parts? TIA.

12 August 2015, 19:30

Guy Golsteyn
No, I sprayed them free-hand.

12 August 2015, 19:46

Roberto Rocat
Wow. The result is amazing. Bravo.

13 August 2015, 06:07

Guy Golsteyn
Some more progress was made, and some more pics were uploaded😉

14 August 2015, 15:17

Roberto Rocat
Great progress.

14 August 2015, 16:25

Wim van der Luijt
GReat build Guy! I have made my hands dirty on the 1:1 version more than once (on a 75/5 and a 100RS amongst others). From the years spent working on my bikes I see one thing that is missing. The fuel lines should be interconnected. If you look at the air filter housing there is a hole in the lower corner on the crankcase side. The fuel lines are connected through those holes.... Check this pic for clarity: [img1]

14 August 2015, 17:32

Lee Fogel
Outstanding paint work...stunning!

14 August 2015, 18:16

Guy Golsteyn
Good call Wim! I wondered why the little holes in the engine block were there... That mystery is solved now, and the error is corrected. Thanks!

15 August 2015, 14:22