EC135 ADAC
评论
1 8 May 2017, 06:14
![](/profiles/img/15930-829-s.png)
Good luck, I built this model, it's nice but pay attention to fuselage halves as they didn't click in smoothly in my case, and had to apply claps. I used Ammo Mig paint and after market decals.
10 May 2017, 02:36
![](/profiles/img/12818-161-s.png)
First problem: Add 10 grams of weight in a teeny tiny part. Hmm. Put some lead in it, but that weighed about 1 gram... I see problems in my future. 🙁
11 May 2017, 06:36
![](/profiles/img/28909-839-s.png)
Like cortex said, beware when jouning the fuselage halves. Mine never got right (or finished)
11 May 2017, 14:38
![](/profiles/img/12818-161-s.png)
Thanks for the warming, Cortex and Martin.
Seats and stretcher are done.
12 May 2017, 09:45
![](/profiles/img/12818-161-s.png)
Fuselage halves are painted, cockpit is ready. When all is dry I'm going to join the fuselages halves. Let's see if I am more lucky than Cortex and Spanjaard...
15 May 2017, 05:48
![](/profiles/img/12818-161-s.png)
Chopper is done. I didn't have big problems with the fuselage halves, but that was in part because I put the rotor-base too low. If I fitted that a bit higher (where it should have been), the fuselage wouldn't have fit and the rotors would. Since I put it in low, the rotors couldn't get attached the proper way and are now quite vulnerable to breakage.
The front window didn't fit, and I had to cut away quite a bit at the bottom middle. No solution for the big gap at the top of the window, though. I could put some putty in it, but decided not to. Part laziness (already painted the thing), part because I thought I'd screw it up.
Itty bitty baby chopper. I like it.
21 May 2017, 11:55