I-16 mosca in-flight and on the ground
plastic and PE parts (primed)
PE primed
engine cover, almost started cutting before taking the picture...
with PE Part, primed and then sanded
Exhaust added in the bottom part
need to add exhaust here too....
nothing in the interior... glue and putty 😛
ribs added
did some cuts to make the engine PE look more like engine... i may look for other solution....
pilot seat PE parts, nice
carpet monster took control stick.... scratch part could be improved
i have been delaying the paint process, because i need to scratchbuild some details....
After a long time, the pair is back in the bench. Applied dark geeen in the upper surfaces, light blue in the lower. Now "a bit" of masking to add the red bands
Masking removed, a few touches to fix a bit of green taken by the masking tape and to repair a bit of red overspray. Starting to look like I wanted it
I did not like the colours of the decal for the tail, so I printed one at home.
Replaced axles of the props with metal. I drilled through the centre of the propeller. I need to add some metal tubing there, to simulate the detail I see I the real size planes
replacement landing gear. i did not want to use the plastic one, too weak. metal tubing in two sizes, and one thin cable to make it more interesting
Painted
On its legs for the first time. Now I see that I forgot one decal, and I need to fix some paint..... macro is really unforgiving
and this one is completed.
and the inflight one, as well.
It can not be seen in this picture, but the struts are not correctly placed.... pity, but i like the landing gear as it is, so as it is will remain.
评论
49 1 October 2018, 22:06
Robert Podkoński
I am absolutely speechless here... I was going to start assembly of the GeeBees in 1/144th scale... but maybe when I will grow more confident... 😉
I am absolutely speechless here... I was going to start assembly of the GeeBees in 1/144th scale... but maybe when I will grow more confident... 😉
13 May 2022, 15:48
Spanjaard
thanks Robert and Sebastian
@Robert, at the end you finished the (beautiful) GeeBees far sooner than I finished the I-16's 😉
thanks Robert and Sebastian
@Robert, at the end you finished the (beautiful) GeeBees far sooner than I finished the I-16's 😉
25 August 2022, 15:10
Greg Baker
oh... Now those are little gems! Now all they need is a tiny DC motor inside. 🙂
You did such a great job on the details, I look at the one on my shelf with pity and remorse. 😉
oh... Now those are little gems! Now all they need is a tiny DC motor inside. 🙂
You did such a great job on the details, I look at the one on my shelf with pity and remorse. 😉
25 August 2022, 15:20
Spanjaard
Thanks Rui, and thanks Greg, you are too kind. But Greg, pity and remorse? Why? you have one of the most fantastic model collections in SCM. I am the one with remosmrse when I see my empty display cabinet....
Motor, that is a possibility I have though sometimes. I will certainly ask u about it when I do it
Thanks Rui, and thanks Greg, you are too kind. But Greg, pity and remorse? Why? you have one of the most fantastic model collections in SCM. I am the one with remosmrse when I see my empty display cabinet....
Motor, that is a possibility I have though sometimes. I will certainly ask u about it when I do it
25 August 2022, 17:49
Николай Романов
Это круто👍...мне понадобился бы микроскоп, что бы такое сделать
Это круто👍...мне понадобился бы микроскоп, что бы такое сделать
14 September 2022, 04:54
Spanjaard
Thanks Николай Романов, no microscope involved, for other planes of this project I had to use magnification a couple of times 😄
Thanks Николай Романов, no microscope involved, for other planes of this project I had to use magnification a couple of times 😄
14 September 2022, 07:56
Spanjaard
Thanks Neuling, yes project is just half way, but taking shape now 🙂
Thanks Neuling, yes project is just half way, but taking shape now 🙂
14 September 2022, 08:00
William Adair
Congratulations! Lovely work. The undercarriage especially is really nicely done!
Congratulations! Lovely work. The undercarriage especially is really nicely done!
14 September 2022, 11:49
Spanjaard
Wow, thanks a lot! Villiers, F_IV, bughunter and Mike, you make really happy
Wow, thanks a lot! Villiers, F_IV, bughunter and Mike, you make really happy
14 September 2022, 13:29
Maurice van der Vleuten
lovely work indeed! I just noticed whom to contact on building planes on ships 😉
lovely work indeed! I just noticed whom to contact on building planes on ships 😉
19 September 2022, 13:37
Album info
two more done for my "flying circus" project. one at least in spanish republican colors, maybe both, not yet sure.