Lipetsk Training Center - Sukhoi Su-27SM - WIP
![Album image #1 Album image #1](/albums/img/7/2/3/535723-12266-44-720.jpg)
Box Art
![Album image #2 Album image #2](/albums/img/7/2/4/535724-12266-62-720.jpg)
Zvezda has made some fantastic releases in the last years and this kit is no exception (at the first glance that is) Very nice, many parts, clean and crisp detail
![Album image #3 Album image #3](/albums/img/7/2/5/535725-12266-96-720.jpg)
Additionally i went fore some Aires nozzles, an Eduard PE set, PE pitot tube and static dischargers and canopy masks
![Album image #4 Album image #4](/albums/img/7/2/6/535726-12266-69-720.jpg)
First fitting of the fuselage parts. Yep, looks like a Su-27!
![Album image #5 Album image #5](/albums/img/7/2/7/535727-12266-39-720.jpg)
Then the eyeroll moment, the wings are totally warped!
![Album image #6 Album image #6](/albums/img/7/2/8/535728-12266-17-720.jpg)
Looks like it is making some kind of a wave dance
![Album image #7 Album image #7](/albums/img/7/2/9/535729-12266-72-720.jpg)
The problem was eventually solved by heating the parts with a hairdryer and bringing them in shape. The plastic is rather soft and....well, plastic
![Album image #8 Album image #8](/albums/img/7/3/0/535730-12266-97-720.jpg)
All parts cut from the sprues and sorted
![Album image #9 Album image #9](/albums/img/7/3/1/535731-12266-57-720.jpg)
I sort them in groups and building steps, this gives me better overview over the building process
![Album image #10 Album image #10](/albums/img/7/3/2/535732-12266-88-720.jpg)
The upper fuselage half comes in two separate parts, this modulation makes it easier for the kit maker to produce different versions of a model..
![Album image #11 Album image #11](/albums/img/7/3/3/535733-12266-87-720.jpg)
for the modeler it means additional headache though. It is almost impossible to glue the parts perfectly to each other, let's see if i am going to need putty here
![Album image #12 Album image #12](/albums/img/9/5/8/535958-12266-97-720.jpg)
The canopy did not convince me on the other hand, first of all it is quite foggy and scratched
![Album image #13 Album image #13](/albums/img/9/5/9/535959-12266-75-720.jpg)
Second, it is also warped inwards pretty significantly!
![Album image #14 Album image #14](/albums/img/9/6/0/535960-12266-32-720.jpg)
To bend it back i used the hairdryer trick, here it worked surprisingly well too, even the usually brittle clear parts could be bent easily after heating
![Album image #15 Album image #15](/albums/img/9/6/1/535961-12266-32-720.jpg)
I tried to sand and polish the canopy first but no matter what i tried it always looked misty and foggy in the end! So instead i went for the "dunking in Future" method and it turned out pretty well. I think i'll even go for a second coat....
![Album image #16 Album image #16](/albums/img/9/6/2/535962-12266-91-720.jpg)
The overall fit is pretty good (after bending it in shape)
![Album image #17 Album image #17](/albums/img/2/7/4/536274-12266-65-720.jpg)
Aires nozzle set and kit parts in juxtaposition
![Album image #18 Album image #18](/albums/img/2/7/3/536273-12266-87-720.jpg)
Some material has to be milled from the kit parts to provide a good fitting
![Album image #19 Album image #19](/albums/img/2/7/5/536275-12266-55-720.jpg)
Eventually the fit turned out to be pretty good
![Album image #20 Album image #20](/albums/img/2/7/6/536276-12266-84-720.jpg)
Comparison between kit part and aftermarket
![Album image #21 Album image #21](/albums/img/2/7/7/536277-12266-58-720.jpg)
The resin parts combined with a kit fuselage part
![Album image #22 Album image #22](/albums/img/2/8/3/536283-12266-88-720.jpg)
I don't think i'm petty, but to my eye the rear part of the aftermarket nozzle is too long! Wasn't the idea behind aftermarket parts to correct kit flaws in the first place?
![Album image #23 Album image #23](/albums/img/2/7/8/536278-12266-41-720.jpg)
The afterburner flame stabilizers are provided as a PE part
![Album image #24 Album image #24](/albums/img/2/7/9/536279-12266-76-720.jpg)
They are shaped in a certain way, i used the kit part to bend the PE one
![Album image #25 Album image #25](/albums/img/2/8/2/536282-12266-72-720.jpg)
Here again, to my liking the kit part looks more like the real thing...(even though they are installed other way round here)
![Album image #26 Album image #26](/albums/img/2/8/1/536281-12266-40-720.jpg)
![Album image #27 Album image #27](/albums/img/3/7/5/537375-12266-68-720.jpg)
Eduard delivers some really nice colored PE parts for the cockpit
![Album image #28 Album image #28](/albums/img/3/7/4/537374-12266-61-720.jpg)
Looks really good and crisp, even in 1:72
![Album image #29 Album image #29](/albums/img/3/7/6/537376-12266-28-720.jpg)
![Album image #30 Album image #30](/albums/img/3/7/8/537378-12266-71-720.jpg)
Landing gear doors, even the hinges are provided as separate parts
![Album image #31 Album image #31](/albums/img/3/7/7/537377-12266-99-720.jpg)
Main wheel wells upgraded with Eduard's PE
![Album image #32 Album image #32](/albums/img/3/7/9/537379-12266-95-720.jpg)
To prevent any chance of tailsitting a large screw was superglued into the nosecone
![Album image #33 Album image #33](/albums/img/3/8/0/537380-12266-23-720.jpg)
Fits like a glove...
![Album image #34 Album image #34](/albums/img/3/8/1/537381-12266-35-720.jpg)
Fuselage halves joined, nose mounted. I use superglue both as glue and putty for the seamlines in this case
![Album image #35 Album image #35](/albums/img/6/8/9/537689-12266-55-720.jpg)
Actually i wanted to use as little putty as possible to save the surface detail and panel lines...
![Album image #36 Album image #36](/albums/img/6/9/1/537691-12266-10-720.jpg)
But hey, there go my plans...:/
![Album image #37 Album image #37](/albums/img/6/9/0/537690-12266-41-720.jpg)
![Album image #38 Album image #38](/albums/img/6/9/2/537692-12266-80-720.jpg)
While quite understandably with the modified engine cones...
![Album image #39 Album image #39](/albums/img/6/9/3/537693-12266-55-720.jpg)
...this could have been prevented by fitting the lower wing part better (by removing the protruding ejection markings for example)..
![Album image #40 Album image #40](/albums/img/6/9/4/537694-12266-31-720.jpg)
...like I did on this side! The massive gaps had to be filled though.
![Album image #41 Album image #41](/albums/img/6/9/5/537695-12266-47-720.jpg)
Nose required some plastering too.
![Album image #42 Album image #42](/albums/img/8/2/6/537826-12266-32-720.jpg)
The transition between the two upper fuselage sections i managet to fit without putty
![Album image #43 Album image #43](/albums/img/8/2/5/537825-12266-87-720.jpg)
K-36 looks all right with some nice Eduard add-ons!
![Album image #44 Album image #44](/albums/img/0/7/9/538079-12266-52-720.jpg)
I did not want to go total autism on it but I thought some rivet detail won't do any harm...
![Album image #45 Album image #45](/albums/img/0/8/0/538080-12266-16-720.jpg)
..because there were absolutely none projected by Zvezda and you clearly see some prominent rivet rows on photos of this beauty
![Album image #46 Album image #46](/albums/img/0/8/1/538081-12266-49-720.jpg)
Flame holders installed, still some painting to do
![Album image #47 Album image #47](/albums/img/0/8/2/538082-12266-33-720.jpg)
nozzles look all right but the transition to the fuselage requires some putty too..
![Album image #48 Album image #48](/albums/img/7/9/6/538796-12266-16-720.jpg)
Some rivet detail on the slats
![Album image #49 Album image #49](/albums/img/7/9/7/538797-12266-76-720.jpg)
The nozzles themselves needed some alignment too..
![Album image #50 Album image #50](/albums/img/7/9/9/538799-12266-30-720.jpg)
...so did the transition between fin and fuselage
![Album image #51 Album image #51](/albums/img/7/9/8/538798-12266-35-720.jpg)
less on this side but quite a gap though
![Album image #52 Album image #52](/albums/img/8/0/0/538800-12266-32-720.jpg)
to protect the surface detail on the fin a strip of tape is placed a millimeter above the gap
![Album image #53 Album image #53](/albums/img/8/0/1/538801-12266-90-720.jpg)
![Album image #54 Album image #54](/albums/img/8/0/2/538802-12266-70-720.jpg)
Like I said i wanted to use as little putty as possible :/ Maybe I should rethink my approach on modeling...
![Album image #55 Album image #55](/albums/img/8/0/3/538803-12266-79-720.jpg)
Also notice the massive sinkhole at the back of the fin right before the pointy part...this will require some putty too
![Album image #56 Album image #56](/albums/img/8/0/4/538804-12266-69-720.jpg)
I love this trademark look of the Sukhoi!
![Album image #57 Album image #57](/albums/img/8/0/5/538805-12266-16-720.jpg)
The fit of the nacelles is pretty good..
![Album image #58 Album image #58](/albums/img/8/0/6/538806-12266-22-720.jpg)
..the gap between front and rear part is too wide though
![Album image #59 Album image #59](/albums/img/8/0/7/538807-12266-42-720.jpg)
sigh...
![Album image #60 Album image #60](/albums/img/3/1/8/540318-12266-45-720.jpg)
also filled some sinkholes at the back of the fins while at it...
![Album image #61 Album image #61](/albums/img/3/2/0/540320-12266-80-720.jpg)
![Album image #62 Album image #62](/albums/img/3/1/9/540319-12266-12-720.jpg)
Now the fit of the nacelles is very smooth, but quite some surface detail was lost in the sanding process...
![Album image #63 Album image #63](/albums/img/3/2/1/540321-12266-65-720.jpg)
![Album image #64 Album image #64](/albums/img/6/2/9/540629-12266-47-720.jpg)
Ready for primer!
![Album image #65 Album image #65](/albums/img/6/3/0/540630-12266-89-720.jpg)
Some Eduard PE detail here and there
![Album image #66 Album image #66](/albums/img/9/2/1/540921-12266-52-720.jpg)
Primer applied!
![Album image #67 Album image #67](/albums/img/9/2/2/540922-12266-47-720.jpg)
I've tried countless primers and basecoats and I found my holy grail.
![Album image #68 Album image #68](/albums/img/9/2/0/540920-12266-41-720.jpg)
It is thin and preserves surface detail very well, at the same time very robust and adhesive. Gives a nice silky smooth finish for the following paint.
![Album image #69 Album image #69](/albums/img/0/0/0/541000-12266-39-720.jpg)
Restoring some panel lines and rivets
![Album image #70 Album image #70](/albums/img/9/9/8/540998-12266-29-720.jpg)
Some stiff tape is a good aid for that
![Album image #71 Album image #71](/albums/img/9/9/9/540999-12266-56-720.jpg)
Riveting action on the upper half, let's see if any of this is going to be still visible after the painting...
![Album image #72 Album image #72](/albums/img/0/0/1/541001-12266-32-720.jpg)
Lower sides of the engines suffered pretty bad, there was a bit more to do.
![Album image #73 Album image #73](/albums/img/9/0/2/541902-12266-76-720.jpg)
HUD "frame" is provided as a nice PE part
![Album image #74 Album image #74](/albums/img/9/0/3/541903-12266-28-720.jpg)
The canopy and windshield became crystal clear after the "Future" treartment
![Album image #75 Album image #75](/albums/img/9/0/4/541904-12266-89-720.jpg)
Ready for paint! All the armament already assembled
![Album image #76 Album image #76](/albums/img/9/0/5/541905-12266-70-720.jpg)
Some PE for the missles...
![Album image #77 Album image #77](/albums/img/9/0/6/541906-12266-29-720.jpg)
...and the pylons
![Album image #78 Album image #78](/albums/img/9/0/7/541907-12266-89-720.jpg)
landing gear recieved some refinement too
![Album image #79 Album image #79](/albums/img/5/0/1/542501-12266-29-720.jpg)
Ok, the boring stuff is over, now the fun part begins! The two tone camouflage is held in pretty bright blue colors, so the preshading was held in a dark blue color
![Album image #80 Album image #80](/albums/img/5/0/2/542502-12266-89-720.jpg)
Followed by white mottling "inbetween"
![Album image #81 Album image #81](/albums/img/5/0/3/542503-12266-98-720.jpg)
![Album image #82 Album image #82](/albums/img/5/0/5/542505-12266-35-720.jpg)
I like to mix my own colors (which often holds the chance of failure) but I enjoy it nontheless!
![Album image #83 Album image #83](/albums/img/5/0/4/542504-12266-42-720.jpg)
First attempt was 10 parts white XF-2 with one part blue XF-8, the upper sample. But the result was too dull and grey, so I went with X-14 instead which is brighter and more saturated. Definitely a step in the right direction..
![Album image #84 Album image #84](/albums/img/5/0/6/542506-12266-86-720.jpg)
I dilute the paint more than usual and work in thin layers. This way I can control the coverage better..
![Album image #85 Album image #85](/albums/img/5/0/7/542507-12266-76-720.jpg)
![Album image #86 Album image #86](/albums/img/5/0/8/542508-12266-95-720.jpg)
![Album image #87 Album image #87](/albums/img/5/0/9/542509-12266-58-720.jpg)
So far so good!
![Album image #88 Album image #88](/albums/img/7/9/5/542795-12266-38-720.jpg)
So, like I mentioned the base blue was definitely too pale so I mixed a darker shade and thinned it down even more so the paint became very transparent and acts more like a "filter" than a coat of paint
![Album image #89 Album image #89](/albums/img/7/9/6/542796-12266-41-720.jpg)
This ensures all the preshading is still visible. Seems a bit too dark on the picture, the exposure is a bit low because of the white background but looks all right in real. Definitely better than before!
![Album image #90 Album image #90](/albums/img/4/3/1/544431-12266-48-720.jpg)
Masking time for second color!
![Album image #91 Album image #91](/albums/img/4/3/0/544430-12266-53-720.jpg)
I use Tamiyas flexible tape and Airbrush masking film for more curved patches
![Album image #92 Album image #92](/albums/img/4/3/2/544432-12266-51-720.jpg)
The outline is drawn onto applied masking film...
![Album image #93 Album image #93](/albums/img/4/3/3/544433-12266-47-720.jpg)
...masking film placed back onto release paper and outline cut out...
![Album image #94 Album image #94](/albums/img/4/3/4/544434-12266-16-720.jpg)
...mask placed back onto surface.
![Album image #95 Album image #95](/albums/img/4/3/5/544435-12266-43-720.jpg)
Time consuming, but necessary!
![Album image #96 Album image #96](/albums/img/4/3/6/544436-12266-88-720.jpg)
![Album image #97 Album image #97](/albums/img/4/3/7/544437-12266-25-720.jpg)
![Album image #98 Album image #98](/albums/img/6/9/0/544690-12266-38-720.jpg)
The second camouflage color is done in a similar manner, panel lines were kept darker. But this time the paint was diluted less and applied more dry to prevent accumulations at the mask edges
![Album image #99 Album image #99](/albums/img/6/9/1/544691-12266-46-720.jpg)
Favourite part: pulling off masks!
![Album image #100 Album image #100](/albums/img/6/9/2/544692-12266-32-720.jpg)
![Album image #101 Album image #101](/albums/img/6/9/3/544693-12266-23-720.jpg)
Applying masks for the white surfaces
![Album image #102 Album image #102](/albums/img/6/9/4/544694-12266-78-720.jpg)
![Album image #103 Album image #103](/albums/img/6/9/5/544695-12266-23-720.jpg)
![Album image #104 Album image #104](/albums/img/6/9/6/544696-12266-93-720.jpg)
![Album image #105 Album image #105](/albums/img/6/9/7/544697-12266-67-720.jpg)
![Album image #106 Album image #106](/albums/img/1/6/6/545166-12266-64-720.jpg)
Masking to paint the white nosecone
![Album image #107 Album image #107](/albums/img/1/6/4/545164-12266-12-720.jpg)
![Album image #108 Album image #108](/albums/img/1/6/5/545165-12266-18-720.jpg)
wheel wells painting
![Album image #109 Album image #109](/albums/img/1/6/7/545167-12266-67-720.jpg)
Future glosscoat applied
![Album image #110 Album image #110](/albums/img/1/6/8/545168-12266-35-720.jpg)
![Album image #111 Album image #111](/albums/img/9/6/9/547969-12266-76-720.jpg)
Decaling time!
![Album image #112 Album image #112](/albums/img/9/7/1/547971-12266-77-720.jpg)
What i like to do is to "sand" the applied decals with a fine sponge in order to get a more used and faded look. Left side already treated, right to go
![Album image #113 Album image #113](/albums/img/9/7/0/547970-12266-34-720.jpg)
All the work protected by another coat of "Future"
![Album image #114 Album image #114](/albums/img/9/7/2/547972-12266-37-720.jpg)
Next step was the weathering. I use AK enamel washes
![Album image #115 Album image #115](/albums/img/9/7/4/547974-12266-37-720.jpg)
Applying finely on all the panel lines and surface details
![Album image #116 Album image #116](/albums/img/9/7/3/547973-12266-25-720.jpg)
And wiping it off with a soft cloth
![Album image #117 Album image #117](/albums/img/0/9/1/553091-12266-83-720.jpg)
After a coat of semigloss varnish the masking for the natural metal areas for the engines begins
![Album image #118 Album image #118](/albums/img/0/9/0/553090-12266-24-720.jpg)
Some apply the natural metal finish first, i prefer it like this
![Album image #119 Album image #119](/albums/img/0/9/2/553092-12266-60-720.jpg)
I use AK Xtreme Metal metallics, great range of metal effects
![Album image #120 Album image #120](/albums/img/0/9/3/553093-12266-72-720.jpg)
Basic painting with different shades
![Album image #121 Album image #121](/albums/img/0/9/5/553095-12266-69-720.jpg)
Underside
![Album image #122 Album image #122](/albums/img/0/9/4/553094-12266-62-720.jpg)
Then i went into detail
![Album image #123 Album image #123](/albums/img/0/9/6/553096-12266-33-720.jpg)
Quite a few layers of wash and detail painting later
![Album image #124 Album image #124](/albums/img/0/9/7/553097-12266-55-720.jpg)
![Album image #125 Album image #125](/albums/img/7/9/9/555799-12266-18-720.jpg)
Installing the seat and completing the cockpit
![Album image #126 Album image #126](/albums/img/8/0/1/555801-12266-85-720.jpg)
Last shots before closing the lid!
![Album image #127 Album image #127](/albums/img/8/0/0/555800-12266-46-720.jpg)
I'd rather have my 1:72nd scale models "streamlined" and with a closed canopy and airbrakes etc. to preserve the basic shape of the real airplane as good as possible. Open canopies are reserved for 1:48th!
![Album image #128 Album image #128](/albums/img/7/1/7/556717-12266-32-720.jpg)
Missiles received some love too, here the R-27 heatseeker version
![Album image #129 Album image #129](/albums/img/7/1/8/556718-12266-40-720.jpg)
X-31 in various metal shades
![Album image #130 Album image #130](/albums/img/7/1/9/556719-12266-18-720.jpg)
![Album image #131 Album image #131](/albums/img/7/2/0/556720-12266-10-720.jpg)
R-73 short range heatseeker
![Album image #132 Album image #132](/albums/img/7/2/1/556721-12266-59-720.jpg)
R-27 Radar version
![Album image #133 Album image #133](/albums/img/7/2/2/556722-12266-83-720.jpg)
Finally, R-77 with PE fins
![Album image #134 Album image #134](/albums/img/5/8/3/558583-12266-34-720.jpg)
![Album image #135 Album image #135](/albums/img/5/8/4/558584-12266-22-720.jpg)
![Album image #136 Album image #136](/albums/img/5/8/7/558587-12266-93-720.jpg)
![Album image #137 Album image #137](/albums/img/5/8/8/558588-12266-61-720.jpg)
![Album image #138 Album image #138](/albums/img/5/9/0/558590-12266-64-720.jpg)
![Album image #139 Album image #139](/albums/img/5/9/1/558591-12266-91-720.jpg)
![Album image #140 Album image #140](/albums/img/5/9/2/558592-12266-99-720.jpg)
![Album image #141 Album image #141](/albums/img/5/9/3/558593-12266-24-720.jpg)
![Album image #142 Album image #142](/albums/img/5/9/4/558594-12266-66-720.jpg)
![Album image #143 Album image #143](/albums/img/5/9/5/558595-12266-23-720.jpg)
![Album image #144 Album image #144](/albums/img/5/9/6/558596-12266-58-720.jpg)
![Album image #145 Album image #145](/albums/img/5/9/7/558597-12266-24-720.jpg)
![Album image #146 Album image #146](/albums/img/5/9/8/558598-12266-13-720.jpg)
![Album image #147 Album image #147](/albums/img/5/9/9/558599-12266-51-720.jpg)
![Album image #148 Album image #148](/albums/img/6/0/0/558600-12266-91-720.jpg)
![Album image #149 Album image #149](/albums/img/6/0/1/558601-12266-72-720.jpg)
![Album image #150 Album image #150](/albums/img/6/0/2/558602-12266-92-720.jpg)
![Album image #151 Album image #151](/albums/img/6/0/3/558603-12266-92-720.jpg)
![Album image #152 Album image #152](/albums/img/6/0/4/558604-12266-47-720.jpg)
![Album image #153 Album image #153](/albums/img/6/0/5/558605-12266-40-720.jpg)
![Album image #154 Album image #154](/albums/img/6/0/6/558606-12266-25-720.jpg)
![Album image #155 Album image #155](/albums/img/6/0/7/558607-12266-86-720.jpg)
![Album image #156 Album image #156](/albums/img/6/0/8/558608-12266-83-720.jpg)
![Album image #157 Album image #157](/albums/img/6/1/9/558619-12266-15-720.jpg)
![Album image #158 Album image #158](/albums/img/6/2/0/558620-12266-53-720.jpg)
![Album image #159 Album image #159](/albums/img/6/2/1/558621-12266-14-720.jpg)
![Album image #160 Album image #160](/albums/img/6/0/9/558609-12266-77-720.jpg)
![Album image #161 Album image #161](/albums/img/6/1/0/558610-12266-84-720.jpg)
![Album image #162 Album image #162](/albums/img/6/1/1/558611-12266-36-720.jpg)
![Album image #163 Album image #163](/albums/img/6/1/2/558612-12266-40-720.jpg)
![Album image #164 Album image #164](/albums/img/6/1/3/558613-12266-49-720.jpg)
![Album image #165 Album image #165](/albums/img/6/1/4/558614-12266-10-720.jpg)
![Album image #166 Album image #166](/albums/img/6/1/5/558615-12266-67-720.jpg)
![Album image #167 Album image #167](/albums/img/6/1/6/558616-12266-40-720.jpg)
![Album image #168 Album image #168](/albums/img/6/1/7/558617-12266-92-720.jpg)
![Album image #169 Album image #169](/albums/img/6/1/8/558618-12266-47-720.jpg)
评论
48 7 November 2018, 10:20
![](/profiles/img/33079-346-s.jpg)
It's Russian, it's fast and it's a jet ... and it's my all time favouritist hairyplane! It will be done in a Maritime camo of course? Don't mind me Alex, i'll Be in the back seat learning cryllic writing!
8 November 2018, 07:34
![](/profiles/img/12266-435-s.jpg)
"i'll Be in the back seat learning cryllic writing!" It's a one seater, Peter! ...Hey, that even rhymes😄
8 November 2018, 08:08
![](/profiles/img/12266-435-s.jpg)
As for the camo, there are two options for the serial jets in the AF, a two tone blue and a three tone grey/grey blue camo. I am still indecisive which one it is going to be..
8 November 2018, 08:19
![](/profiles/img/33079-346-s.jpg)
If I was 40 kilos lighter I'd sit on your knee! Either camo will look awesome!
8 November 2018, 08:50
![](/profiles/img/21096-573-s.jpg)
since Peter is taking the space in the cabin, i will take a seat outside, but will certainly not miss this one!
12 November 2018, 23:34
![](/profiles/img/12266-435-s.jpg)
There are no seats left outside either, Spanjaard but i can hang you on one of the pylons, there are plenty of them 😄
13 November 2018, 05:35
![](/profiles/img/12266-435-s.jpg)
The place in the burner can seems cozy too, at least when the engine isn't runnng...
13 November 2018, 05:37
![](/profiles/img/12266-435-s.jpg)
Spanjaard, it's warm and cozy in there what do you want else? You can have a blanket if you want 😄
14 November 2018, 10:59
![](/profiles/img/12266-435-s.jpg)
Aris, if you count them I reassure you there are a few missing😄 Treehugger, you are welcome!
14 November 2018, 11:01
![](/profiles/img/19145-520-s.png)
Amazing work so far. The burner cans do make you question whether they were worth it for this scale. The Cockpit looks amazing. As for the rivet detail, I'm definitely not worthy. Truly amazing.
14 November 2018, 13:19
![](/profiles/img/12266-435-s.jpg)
Thanks mates!
Bryn, thing is i never installed aftermarket burner cans before so I just wanted to try. Are they worth it? They do look better than the kit parts but considering them being not correct in their proportions you could wish for more for 13€. Again, to my eye the rear part of the nozzle seems to bee to long. Maybe there are different versions of these nozzles and I am mistaken and would love to stand corrected, but my research has shown it to be the case. The riveting, i must say this is a significant effect for such little work. What did I spend on a fin, 15 minutes? It's not that I am superhuman, you just have to try for yourself to see how easy it is! I did it with a simple Trumpeter rivet maker tool.
cheers
Alex
14 November 2018, 18:11
![](/profiles/img/28909-839-s.png)
Alex, can you quit this site? You are making me feel totally inadequate! Keep up the lessons 👍
16 November 2018, 07:30
![](/profiles/img/12266-435-s.jpg)
Lol, what is making you so uncomfortable 😄 I feel inadequate posting this avoidable plastering orgy...
16 November 2018, 09:31
![](/profiles/img/12266-435-s.jpg)
Thanks mates!
Agustin, I defintely am going to build this "SKM" Flanker one day, always liked the black/grey scheme, yours looks fantastic and I see you did your research homework and even added the refueling probe! Anything else you changed compared to the "SM" model? Would love to see more WIP pictures 👍
22 November 2018, 06:03
![](/profiles/img/12266-435-s.jpg)
BTW I decided to build the training version from Lipetsk airbase with the two tone blue camouflage. I've got enough grey airplanes in my shelves!
22 November 2018, 06:13
![](/profiles/img/25429-812-s.png)
Bwoaaah!!! Ich liebe deine Farben! I realy love your approach to getting those colors right! The preshading, mottling and choice of color is spot on! 👍
27 November 2018, 06:49
![](/profiles/img/12266-435-s.jpg)
It's far away from "spot on", Patrick😢
The blue is definitely not "blue enough", paint tends to be more pale and dull when applied with an airbrush in comparison to the sample applied manually on paper, which looked ok colorwise. I already reworked that, pics following tomorrow.
27 November 2018, 18:34
![](/profiles/img/25429-812-s.png)
I see what you mean; the colors in the cover picture are more vibrant. But still, the execution of the preshade, mottling and misting the main color looks really good.
27 November 2018, 18:41
![](/profiles/img/12266-435-s.jpg)
Thanks! It's not misting actually, I put down quite wet coats but with very diluted paint.
27 November 2018, 18:45
![](/profiles/img/16625-287-s.png)
This is some really fantastic work, and the step by step pics are wonderful! I know how difficult it can be to stop progress to take pics.
Looking forward to seeing what comes next!
27 November 2018, 19:32
![](/profiles/img/12266-435-s.jpg)
Thank you mates!
Yeah Michael it is definitely distracting handling a camera when you are mid-process but these happen to be the most telling and interesting pictures of a WIP👍. The pictures are far from perfection but I try to progress myself, next step would be to install a nice "photo corner" with good lights, a nice uniform background and the camera steady.
28 November 2018, 05:53
![](/profiles/img/12266-435-s.jpg)
Thanks! The bird is also finished already. Did not have the time to do proper pictures, New Years celebration and such....but definitiely following this week!
2 January 2019, 18:06
![](/profiles/img/12266-435-s.jpg)
Thanks Cuajete! i thought i'd give them a little more attention than I usually do for my 1:72nd stuff. The more I am glad that the effort payed off!
4 January 2019, 13:46
![](/profiles/img/12266-435-s.jpg)
The missile loadout btw is pure fantasy, I just wanted to have at least one of each missiles attached
5 January 2019, 20:50
![](/profiles/img/12266-435-s.jpg)
Thanks Roland, thanks Martin! Yeah i am really happy with the colors too, was quite a challenge to hit the correct shades!
10 January 2019, 05:58
![](/profiles/img/15588-142-s.jpg)
Good work and extensive coverage ,,,,, Congratulations ... I was looking for some buils of the kit ,,, and you have made me buy it ,,, thnkas for all the information
23 August 2022, 16:08
![](/profiles/img/52499-702-s.jpg)
Love the demarcation clean lines between two colours. Also metal paintjob is superb! 👍
26 August 2022, 12:44
![](/profiles/img/48987-587-s.jpg)
This is super high quality, great colors, great Metallics, stunning work 👍
26 August 2022, 15:40
![](/profiles/img/111789-903-s.jpg)
Schöne Su-27, das Cockpit mit den PE Teilen sieht top aus! Die Triebswerksteile kann man sich aber wohl sparen und bei den Kit-Teilen bleiben, lese ich so raus?
Hab den Kit selbst (von Zvezda und Revell), bin gespannt wie die Unterschiede zur Revell/Hasegawa Variante sind.
20 March 2023, 07:44
![](/profiles/img/76342-836-s.jpg)
Very nice build and paint job. I love the engine section. It looks perfect.👌 Congratulation!
20 March 2023, 08:19
![](/profiles/img/12266-435-s.jpg)
Thx mates!
@Der Mattes: Die Düsen aus dem Kit sind brauchbar, Aires ist feiner detailliert aber meiner Meinung nach in der Form nicht ganz korrekt. Zvezda/Hase da hat Zvezda auf jeden Fall die Nase vorne, schon allein wegen der Tatsache, dass die Hasegawa Formen 30 Jahre alt sind.
20 March 2023, 13:28
![](/profiles/img/12266-435-s.jpg)
Thx Alex, there was not much to correct honestly. The Zvezda kits are really good, probably best Su-27 family in 1:72 (from the 2014 tooling)
27 March 2023, 15:21
Album info
Sukhoi Su-27SM work in progress