1970 El Camino Pro Street
![Album image #1 Album image #1](/albums/img/3/1/6/614316-49212-21-720.jpg)
Pro Street tires and rims
![Album image #2 Album image #2](/albums/img/2/7/7/588277-49212-79-720.jpg)
Tubs cut into resin bed
![Album image #3 Album image #3](/albums/img/9/3/5/594935-49212-55-720.jpg)
6 piece fabricated bed wall installed
![Album image #4 Album image #4](/albums/img/5/0/7/594507-49212-75-720.jpg)
Front of bed and rear of interior fabricated
![Album image #5 Album image #5](/albums/img/5/0/6/594506-49212-34-720.jpg)
Front of bed and rear of interior mocked up
![Album image #6 Album image #6](/albums/img/3/2/7/590327-49212-65-720.jpg)
69 Cougar bumper modified for rear
![Album image #7 Album image #7](/albums/img/0/1/5/600015-49212-47-720.jpg)
Interior mock up 3
![Album image #8 Album image #8](/albums/img/3/1/2/1070312-49212-13-720.jpg)
Frame and wheelie bars mock up
![Album image #9 Album image #9](/albums/img/8/0/2/1071802-49212-98-720.jpg)
Mock up 1
![Album image #10 Album image #10](/albums/img/2/7/8/1078278-49212-28-720.jpg)
Engine pieces filed to fit.
![Album image #11 Album image #11](/albums/img/6/6/9/1078669-49212-80-720.jpg)
Engine mock up
![Album image #12 Album image #12](/albums/img/6/7/0/1078670-49212-58-720.jpg)
Blower mock up
![Album image #13 Album image #13](/albums/img/2/7/9/1101279-49212-64-720.jpg)
Spark plug boots
![Album image #14 Album image #14](/albums/img/4/1/6/1105416-49212-60-720.jpg)
Accel ignition wires
![Album image #15 Album image #15](/albums/img/9/8/1/1121981-49212-24-720.jpg)
Collector 1
![Album image #16 Album image #16](/albums/img/9/8/2/1121982-49212-55-720.jpg)
Collector 2
![Album image #17 Album image #17](/albums/img/6/2/2/1131622-49212-53-720.jpg)
Header fabrication
![Album image #18 Album image #18](/albums/img/9/9/8/1185998-49212-66-720.jpg)
Firewall mocked up
![Album image #19 Album image #19](/albums/img/0/6/2/1197062-49212-33-720.jpg)
Body in 1st primer
![Album image #20 Album image #20](/albums/img/2/5/0/1221250-49212-12-720.jpg)
Chassis and interior mostly assembled
![Album image #21 Album image #21](/albums/img/2/5/1/1221251-49212-77-720.jpg)
Body in primer.
![Album image #22 Album image #22](/albums/img/3/7/0/1224370-49212-57-720.jpg)
Color applied.
![Album image #23 Album image #23](/albums/img/5/7/3/1589573-49212-25-720.jpg)
Front brake work.
![Album image #24 Album image #24](/albums/img/8/9/9/1593899-49212-96-720.jpg)
Beefy tires
![Album image #25 Album image #25](/albums/img/9/0/1/1593901-49212-68-720.jpg)
Detailing for photoshoot
![Album image #26 Album image #26](/albums/img/9/0/3/1593903-49212-32-720.jpg)
Front Undercarriage
![Album image #27 Album image #27](/albums/img/9/0/4/1593904-49212-35-720.jpg)
Final tweaks
![Album image #28 Album image #28](/albums/img/9/0/5/1593905-49212-28-720.jpg)
Last details
![Album image #29 Album image #29](/albums/img/9/0/2/1593902-49212-15-720.jpg)
Drinker's side
![Album image #30 Album image #30](/albums/img/9/0/0/1593900-49212-32-720.jpg)
Captain's side
![Album image #31 Album image #31](/albums/img/1/5/4/1606154-49212-20-720.jpg)
Left front with stripes
![Album image #32 Album image #32](/albums/img/1/5/5/1606155-49212-50-720.jpg)
Engine bay 1
![Album image #33 Album image #33](/albums/img/1/5/6/1606156-49212-47-720.jpg)
Front view with stripes
![Album image #34 Album image #34](/albums/img/1/5/7/1606157-49212-72-720.jpg)
Engine bay 2
![Album image #35 Album image #35](/albums/img/1/5/8/1606158-49212-46-720.jpg)
Right front with stripes
评论
36 19 March 2019, 06:11
![](/profiles/img/49212-838-s.jpg)
Got the wheel tubs cut it but due to all the mismatched chassis parts, I am struggling with mocking it up. The front wheels have to be centered which locates the frame. The frame locates the floor pan and interior. The floor pan is too long needs to be cut to mate up with the rear wheel tub floor pan. I also still need to seriously modify the rear suspension. I just wish there was a way to temporarily glue stuff together for mock up. Masking tape isn't working very well.
21 March 2019, 06:35
![](/profiles/img/49212-838-s.jpg)
I was test fitting bumpers on my Jimmie Flintstone '70 El Camino when I ran into a problem. The '68 El Camino donor rear bumper is too wide (by a bunch). I then took out the ONLY rear bumper in my parts bin. A '69 Cougar rear bumper. After some carving, sanding and filing... It looks like it will work decently. (It also solved the problem of too many back up lights.)
26 March 2019, 04:29
![](/profiles/img/37618-212-s.jpg)
That cougar front grille reminds me of one el camino kit i saw online that comes with a "custom" grille with hidden headlights... That would be my take 🙂 ! However nice too see the model "growing".
26 March 2019, 07:14
![](/profiles/img/49212-838-s.jpg)
Visited another LHS while in Portland today. Picked up a bottle of Ford Blue for engine blocks and some Testors enamel thinner to help revitalize some ancient bottles of paint. The real treat was a CHROME Molotow paint pen. I viewed some YouTube videos on them and it looked impressive. I just used it on my Chevelle bumpers to touch up a rototool oops and some sprue scars. All I can say is WOW!!! The closest thing to vacuum metalized chrome I have ever seen. I choked a bit on the $13 price tag but the results are far better than ANY paint I have ever used. Does anyone who owns one know how long the pen lasts?
28 March 2019, 02:29
![](/profiles/img/18039-337-s.jpg)
They sell 3 different tip sizes and FYI Hobby Lobby sells them for 10 bucks,and if you use a 40% off Coupon you'll make out better.
Off topic, but your a car guy, You'll Appreciate this !
autoblog.com/2019/03..00021&yptr=yahoo
28 March 2019, 05:48
![](/profiles/img/49212-838-s.jpg)
Made some progress this evening. Got the grille and head lights to actually fit into the (to be red) '70 Chevelle. Did some more touch ups with my new amazing Molotow chrome pen. I also carefully carved out the Cowl Induction flapper door for one of the hoods. I have to figure out what I am going to make the door out of. The styrene chunk I removed is way too thick to be in scale. I also have decide about applying the stripes that run over it. I am still waiting for a warm enough day with low enough humidity to spray the bodies.
29 March 2019, 05:12
![](/profiles/img/48725-851-s.jpg)
Just as a tip, you can buy a Liquid Chrome top-up jar. Now these things ain't cheap, but it's got an advantage. I have successfully airbrushed Molotow. I thinned it slightly with cellulose thinner. ALWAYS TEST ON A PIECE OF PLASTIC, before committing to the model. Molotow rocks!
29 March 2019, 19:27
![](/profiles/img/49212-838-s.jpg)
Had to work late today but I sprayed some white primer and gold base coats on some spoons. If the humidity stays low I will be able to shoot and select my colors for the red and brown Chevelles. I also have a Chevelle/El Camino photo etch sheet that I need to divvy up amongst the five Chevys. Stay tuned.
30 March 2019, 08:04
![](/profiles/img/49212-838-s.jpg)
Had nice weather so I did some spray paint layouts on some spoons. Of the two browns, one was more of a bronze but the Testors Root Beer Brown metallic lacquer was exactly what I was looking for. Of the 3 reds I tested. The medium red is the color of choice. Got 2 bodies painted and a 3rd in primer. The brown one turned out FANTASTIC!. The blue one got tons of dust and crap in it. I'll try sanding it, it may end up in the purple lake.
31 March 2019, 05:49
![](/profiles/img/49212-838-s.jpg)
More progress today. The El Camino floor pan has been trimmed and joined to the tubs. The red '70 Chevelle got color today and turned out pretty well. The blue '72 got most all of the dust and crap sanded out of it. The respray went surprisingly well, just a few bubbles on the drivers side C pillar. The color is gorgeous in the light. 🙂
1 April 2019, 05:04
![](/profiles/img/49212-838-s.jpg)
After 2-3 days of fabricating (which isn't my strong suit). I have made the front of the bed from 5 pieces including chunks from a Laborghini Countach dashboard. I also made the rear panel for the interior. The Jimmy Flinstone resin body comes with neither. The interior is going to be a mix of '68 El Camino and '70 Monte Carlo parts.
7 April 2019, 01:10
![](/profiles/img/49212-838-s.jpg)
Finally got the divider wall installed. I spent the last 2 days fitting the interior such that it will be happy with the windows. I still have to make a filler panel between the cowl and the base of the windshield. Then maybe I can paint it.
8 April 2019, 05:11
![](/profiles/img/49212-838-s.jpg)
Painted and mocked up the interior this weekend. Added touches with chrome Molotow pen.
22 April 2019, 03:01
![](/profiles/img/49212-838-s.jpg)
Selected the deep dish rims for the Elco. I have a whole box of wheels but not very many for tires this wide. I drilled out all 32 holes to make them more realistic. I plan on dressing up the plain, smooth centers with some spinners from my parts box.
25 May 2019, 20:06
![](/profiles/img/49212-838-s.jpg)
The Chevelles are nearly done but not quite off of the bench yet. I had some more modeling motivation so I opened the ElCo again. Started converting car trailer fenders into front inner fenders. Fabbed some gap filler plates for the wheel tubs to the inside of the bed. I was almost done with the 2nd one when I broke it in half. GRRRRRR!
6 September 2019, 07:13
![](/profiles/img/49212-838-s.jpg)
I have been mostly succeeding in performing 1 task a day on the El Camino while I am building the 2 Freightliners. However, I have run into a snag. It seems I no longer possess the two front spindles for the suspension. No spindles = no front tires. I know I am asking for a needle from a haystack but does anyone have an AMT '68 El Camino that has been parted out? I am hoping to buy the spindles. Otherwise, I will have to spend 3-4 evenings fabricating them from scratch. Thanks
10 October 2019, 04:49
![](/profiles/img/48725-851-s.jpg)
A piece of sprue in a cordless drill. The other end in a hole, in a vertical piece of wood. Slow speed and a small flat file, held at just the right tension. That's how I repair broken prop pins on my 1/72 planes.
10 October 2019, 21:55
![](/profiles/img/49212-838-s.jpg)
Here are the "missing links" 1970 El Camino Pro Street | Album by musclecarfan (1:25)
11 October 2019, 00:30
![](/profiles/img/18039-337-s.jpg)
Ebay.com Item - AMT 1968 Chevy EL Camino SS Frame Chassis Set 1 25 Scale
30 October 2019, 05:57
![](/profiles/img/49212-838-s.jpg)
Bob, Yes they are in there but for that price, I would rather simply fabricate them from sprue. I DO appreiciate finding the link for me. 🙂
30 October 2019, 06:28
![](/profiles/img/18039-337-s.jpg)
Too easy. Wasn't sure, but didn't forget you ! If I had them I'd give them to ya !
30 October 2019, 06:30
![](/profiles/img/49212-838-s.jpg)
Good news. A member from another forum was kind enough to mail me a set of spindles. Now I can make forward progress once I free up some time.
23 December 2019, 04:44
![](/profiles/img/18039-337-s.jpg)
HEY ! What's up with this ? I want to see this DONE ! LOL !!!!!!!!!!!!!!!!!!!!!!!!!!
1 June 2021, 01:19
![](/profiles/img/49212-838-s.jpg)
Well Bob...... I have been spending my time on getting some Mustangs finished up. Though, I did open the El Camino box today. I have all the parts, I need to get on it. Especially since we are back in prime painting weather once again.
You wouldn't happen to have any Pro Mod wings in your stash would you?
1 June 2021, 05:02
![](/profiles/img/49212-838-s.jpg)
Finally got time at the bench today. I was not liking the eyebrow filler plates inside the bed. I finessed them out and start making whole new side panels from scale diamond plate. The glue is setting as I write this.
27 June 2021, 04:39
![](/profiles/img/49212-838-s.jpg)
After 3 months away from the bench, I am back at it. I started detailing the rear rims after raiding the parts box for some inners. I have bed far enough along now I can move on to the frame. I have the multi-piece front suspension mocked up which allowed me to clearance the inner fenders. The frame horns were a bit too long so I trimmed them and test fitted the Chevelle grille and the Monte Carlo bumper. I have also been trimming the wheelie bars so graciously donated by a generous friend. I am quite pleased on the length and width of them. It only took minor notching to get them into their new home. The gas tank looks like it is going to fit with a little sanding here and there. Since I am going with a blower on the BBC, I need to rethink my front accessory drive. The Monte engine has A/C which makes it too complicated. I'll figure out something.
13 September 2021, 04:25
![](/profiles/img/49212-838-s.jpg)
Rims attached to rear meats. Did not like the same wheels on the front. Went through the stash and found these 5 spokes.
Finally far enough along to do a mock up with the help of some rubber bands.
16 September 2021, 05:35
![](/profiles/img/51040-554-s.png)
Mock up looks great. Wheel combo just right.
El Camino's make excellent drag cars.
16 September 2021, 07:03
![](/profiles/img/49212-838-s.jpg)
I went through my spares for a rear axle but nothing I had was to my liking. It was suggested I go to B-N-L Resins website. I found and ordered an axle and some other parts for this build. I have a 9" Ford rear, a 10-71 blower with a Pro Mod hood scoop, a fuel cell and some other goodies on the way.
19 September 2021, 20:38
![](/profiles/img/49212-838-s.jpg)
Got some time to work on the engine today. My B-N-L resin 10-71 blower and Pro Mod scoop needed some work to fit on my Plan B Big Block Chevy. I actually needed two parts box blower manifolds to get the overall height high enough for the blower belt to be tight. I also had to make some valve cover spacers from scratch.
26 September 2021, 04:35
![](/profiles/img/49212-838-s.jpg)
Got all my engine pieces shaved and trimmed to try a mock up. My deep sump pan fits in the frame, The hood scoop is slightly higher than the roof (just like I wanted) and there is plenty of room for the blower drive. I will have to notch the cowl a little bit for the blower but no big deal.
26 September 2021, 23:43
![](/profiles/img/49212-838-s.jpg)
Got my Accel distributor mounted. Working on the spark plug boots made from heat shrink tubing.
2 November 2021, 05:39
![](/profiles/img/49212-838-s.jpg)
Finally got the rear suspension installed. Parts box control arms and coilover shocks. Wheelie bars detailed and installed.
7 November 2021, 01:53
![](/profiles/img/49212-838-s.jpg)
Got the correct color Accel ignition wires and boots installed, Detailed some recently acquired MSD ignition boxes.
7 November 2021, 23:48
![](/profiles/img/49212-838-s.jpg)
Time to make some headers. Cut and crimped the ends of some electronics solder. Gorilla glued and taped them into some styrene tubing. I hope they turn out as well as they did on my Platinum Pony Mustang.
5 December 2021, 19:00
![](/profiles/img/49212-838-s.jpg)
Small victory this evening. I was not liking the big evaporator box on the firewall from the 70 Monte Carlo. I had a 69 Hurst Olds glue bomb sent my way. I spent this evening carving up the firewall from that to fit. Now my Pro Mod engine has a little more room to fit.
17 March 2022, 05:49
![](/profiles/img/49212-838-s.jpg)
I though this day would never come. I have done enough test fitting and kitbashing to think everything is actually going to fit together. I got brave and painted the body in its 1st coat of primer. As usual, It shows some flaws here and there but I can finally see the light at the end of the tunnel.
3 April 2022, 05:38
![](/profiles/img/49212-838-s.jpg)
Did enough bodywork to finally call the primer done. Just set up my decanter rig to vent my choice of yellow paint. I will need to wait for lower humidity before I paint it.
8 May 2022, 00:32
![](/profiles/img/49212-838-s.jpg)
Sprayed my decanted yellow paint today. Overall it turned out decent enough. Got to let it cure for awhile before detailing the body.
13 May 2022, 05:19
![](/profiles/img/51040-554-s.png)
Not a big fan of yellow cars but I think it looks fantastic for the El Camino.
13 May 2022, 08:40
![](/profiles/img/49212-838-s.jpg)
It will be complimented with black SS stripes and maybe some kind of tonneau cover.
14 May 2022, 00:01
![](/profiles/img/49212-838-s.jpg)
This long term project is finally nearing completion. Started in March 2019 and finishing very soon. Steep learning curve as this is my only 2nd resin body. I had to make a lot of touchy adjustments to an already painted body and frame. Some boo boos show, some have been minimized. I had planned a few more details but I am just going to be happy it is finally off the bench.
4 November 2023, 04:50
![](/profiles/img/49212-838-s.jpg)
Nigel, There is not. This was meant to be more of a Pro Street poser than a genuine drag car. Besides, it was all I could do to fit a mismatched interior into an El Camino cab without trying to stuff a roll cage in it too.
4 November 2023, 16:44
![](/profiles/img/49212-838-s.jpg)
Thanks, Nigel. The last tire has just been installed. Once it cures... Show Time!
5 November 2023, 01:09
![](/profiles/img/49212-838-s.jpg)
3 YEARS and 8 months later... This one is finally off the bench. It was part of my Chevelle batch build in 2019. Due to all the test fitting and fabrication required this one was quite the challenge. However, I had a vision, and have now finally seen it through. The quality is not up to par because I had to handle it so much but it is "good enough". I am not sure I will ever take it to a show but at least I have one for the shelf. Comments welcome.
11 November 2023, 05:55
![](/profiles/img/51040-554-s.png)
Looks the business. Captures that 80's pro-street look perfectly
11 November 2023, 14:53
![](/profiles/img/49212-838-s.jpg)
I have obtained and applied some SS stripes to complete my vision for this one. I also added CID callouts to the blower hat butterflies. NOW, I can call this one DONE!
26 November 2023, 21:24
![](/profiles/img/18821-901-s.jpg)
This is cool. I'd put that in my shelf easily. I like the engine and this huge blower.
27 November 2023, 05:08
![](/profiles/img/49212-838-s.jpg)
Well I am going to take it to a local model show tomorrow warts and all. I figure I will at least have the only 70 El Camino there.
4 May, 01:30
![](/profiles/img/18039-337-s.jpg)
Good luck, hope ya bring home the blue ribbon 🤘😎🤘, you'd get my vote !!!!!!!!!!!
4 May, 01:44
![](/profiles/img/49212-838-s.jpg)
Well the El Camino did not win me anything (which I expected) But my 74 Hurst/Olds in the same class did.
5 May, 04:56
Album info
Kit bashed from a number of kits.
1970 El Camino body Jimmy Flintstone (resin).
1968 El Camino chassis, interior tub, windows, rear bumper and tail lights.
1970 Monte Carlo engine, (a correct for an El Camino) front bumper, seats and dashboard.
1967 Pro Street Chevelle wheel tubs and Pro Street tires.
1970 Chevelle grille, head lights.
1969 Cougar rear bumper.
Jaguar radiator
Aftermarket 10-71 blower
Scratch built intake and headers made from solder.
Parts box front tires
Firewall from 1969 Hurst Olds.