Ferrari 641/2
![Album image #1 Album image #1](/albums/img/0/9/5/648095-15981-97-720.jpg)
The tire on the right is a sample of three of the four in the kit. It's deteriorating. Purchasing was too expensive, Tamiya doesn't have any so I had to make some.
![Album image #2 Album image #2](/albums/img/0/9/4/648094-15981-77-720.jpg)
A full tire in a two part mold was tried but didn't work out well for me so, half and half it is
![Album image #3 Album image #3](/albums/img/0/9/8/648098-15981-60-720.jpg)
A little 2 part epoxy, some clamps and we're off.
![Album image #4 Album image #4](/albums/img/0/9/7/648097-15981-33-720.jpg)
Not too bad for an amateur.
![Album image #5 Album image #5](/albums/img/0/9/6/648096-15981-30-720.jpg)
A little filling and sanding....
![Album image #6 Album image #6](/albums/img/0/9/9/648099-15981-42-720.jpg)
Had to cut the rims in half to get them in and had to clean out the centre of the tires to get the rims to fit
![Album image #7 Album image #7](/albums/img/1/0/0/648100-15981-23-720.jpg)
Couple of coats of Tamiya Rubber Black and things are looking up. (They are actually much darker...my photography skills aren't going to win any awards, either!)
![Album image #8 Album image #8](/albums/img/1/0/1/648101-15981-64-720.jpg)
After applying the 28 year old decals from the kit (yep, I was nervous!), they turned out pretty good. A few snafu's here and there but better than I had....
![Album image #9 Album image #9](/albums/img/9/3/6/648936-15981-54-720.jpg)
A little black pencil lead on 400 grit paper, brushed over the decals brings the bright white down a notch.
![Album image #10 Album image #10](/albums/img/9/3/7/648937-15981-88-720.jpg)
Calling them done. Rims are not done, only test fitted. Pretty happy with the "homemade" tires, all in all.
![Album image #11 Album image #11](/albums/img/9/3/5/648935-15981-70-720.jpg)
Now, with the tires out of the way, off to the booth with the body.
![Album image #12 Album image #12](/albums/img/9/3/4/648934-15981-69-720.jpg)
First light coat of primer.
![Album image #13 Album image #13](/albums/img/7/6/6/650766-15981-50-720.jpg)
A couple of coats of TS-8, a few days to dry then on to the decals.
评论
13 30 August 2019, 01:25
![](/profiles/img/user-s.jpg)
Interesting tyre replacement. Surprised I don't see more of that for the 1 12 Heller kits everyone seems to love so much.
8 September 2019, 07:12
![](/profiles/img/108467-993-s.jpg)
Fantastic work thanks for sharing your whell build and idea whed it
Superb painting
5 October 2023, 09:13
![](/profiles/img/71183-374-s.jpg)
what kind of material do you use to make the mold and the tyres? Its perfect!!!!
24 October 2023, 20:58
![](/profiles/img/72020-938-s.jpg)
Nice work! That Mansell guy was found in quite a bunch of different racing cars…! I'm also interested in the molding procedure you did at this one.
24 October 2023, 21:12
![](/profiles/img/15981-710-s.jpg)
Thanks, folks! It's been awhile. I got away from this build after some frustrations with other parts. I will get back someday but for now, it sits in a box in my stash.
@Emanuel & Mark. The material is just your basic resin kit bought from Michael's Craft Store. Two part rubber for the mold, two part resin for the tires. I made a few attempts at molding one piece tires but just couldn't get it to work, so I ended up molding each half and joining them with epoxy.
25 October 2023, 00:50
Album info
The Tamiya 1/12 Ferrari 641/2 (F190) as driven by Nigel Mansell. Not depicting any particular race or chassis #. Using aftermarket photoetch, resin cast, machined parts and decals.