Albatros Dr.I

1
December 13, 2019
A lot of ailerons - cut out and new hinges
2
December 13, 2019
Primed white, and preshaded for Decals.
3
December 13, 2019
A lot of decals provided, but I do not like the colors!
4
December 13, 2019
Will be replaced by Aviattic 5 color lozenge.
5
December 13, 2019
The difference for lower side is more worse.
6
December 14, 2019
Seat parts soldered and nickel silver pipes added.
7
December 14, 2019
Frame with pipes soldered, upholstery added with milliput.
8
December 14, 2019
Seat can be moved, backward position.
9
December 14, 2019
Max forward position.
10
December 14, 2019
Leather painted.
11
December 15, 2019
Nice PE are part of the kit.
12
December 15, 2019
Some dry fitting for the wooden struts.
13
December 15, 2019
The lower wings hangs below middle wing, below the fuselage too.
14
December 16, 2019
Cockpit wooden parts primed white, behind the seat linen color.
15
December 16, 2019
Acrylic wood base painted with brush.
16
December 16, 2019
Wood imitation done with oil paints.
17
December 17, 2019
Some raw work
18
December 17, 2019
Final form reached
19
December 17, 2019
The backside
20
December 17, 2019
And the spinner from the kit fits without modification
21
December 17, 2019
The final painting is done, but had some trouble to get a good picture without daylight (it is sooo early dark now!)
22
December 17, 2019
In the side view it is very thin.
23
December 21, 2019
Fuel selector panel
24
December 21, 2019
Seat frame mounted, belts added
25
December 21, 2019
Some details in left shell.
26
December 21, 2019
Many small details added to teh right side.
27
December 21, 2019
Seat frame glued into right shell.
28
December 21, 2019
A nice cockpit, but will be mostly hidden once closed.
29
February 18, 2020
Tank soldered from brass
30
February 18, 2020
Prepared with inlets and outlet
31
February 18, 2020
Mounted. A started Vector resin engine is also visible, for test fit.
32
February 18, 2020
More parts and detals needed.
33
February 18, 2020
Bearing for the airscrew, also made from brass.
34
February 18, 2020
Runs finally very smooth.
35
February 23, 2020
Conversion resin to a engine
36
February 23, 2020
37
February 23, 2020
Mounted, air screw plugged, able to rotate
38
February 23, 2020
Last view on cockpit
39
February 23, 2020
Fuselage closed
40
February 23, 2020
Still something visible of cockpit and engine.
41
March 27, 2020
Engine masked, all prepared.
42
March 27, 2020
two holes, later for mounting the tail plane allows now to hold the fuselage.
43
March 27, 2020
After white primer I painted "wood base".
44
March 27, 2020
This time taken more care of the seam with sanding and primer, here below.
45
March 27, 2020
Upper seam seems to also ok.
46
March 27, 2020
Wood simulation with oils.
47
March 27, 2020
48
May 3, 2020
Rib tapes are from Pegasus printed 1994. Still usable 🙂
49
May 3, 2020
50
May 8, 2020
Top side.
51
May 23, 2020
The tailplane was one part, after cut in 3 parts and added new hinges I can mount the fixed parts with brass rods through the fuselage and are able to add the elevator out of neutral position.
52
May 8, 2020
Lower side.
53
May 23, 2020
After white primer I added shades and clear coat (partially too much shade, but not enough clear coat sprayed) decals added. Removed the paint of the elevator after bad looking shadows, needs new layer of future.
54
May 23, 2020
The decals are merciless with too little gloss paint, but now it stays that way.
55
May 30, 2020
Ring inserted - black sprayed.
56
May 30, 2020
Outer mask - sprayed white
57
May 30, 2020
The mask with the result
58
May 30, 2020
Looks nice!
59
May 31, 2020
Rib tapes also on leading edge, here the tail plane ...
60
May 31, 2020
... and on the wings.
61
May 31, 2020
62
May 31, 2020
Found a way to apply the tapes also on the trailing edge with securing them with future. Takes some time, but the result seems to be acceptable. All tapes are applied on lower wing now.
63
June 1, 2020
Wrong drawing in Datafile, luckily the lower wing of the kit is ok.
64
June 1, 2020
65
June 1, 2020
Cutout on the middle wing missing. Was already finished, but I decided to fix it.
66
June 5, 2020
The lower wing was finished already.
The middle wing are now also done, including the inner cutout.
Today the remaining rib tapes on upper wings was applied. All done.
But with securing the rib tape on the trailing edge with Future I run into trouble.
67
June 5, 2020
68
June 5, 2020
The left bright grey wheel ist the kit wheel. This is according to the Datafile drawing, but I think it is a bit small. A friend warned me that the Eduard Albatros is sitting notoriously low on the landing gear, so a small wheel would increase that effect.
The Experimental-Datafile mention also the Albatros D.V pages in the Albatros Special Datafile, so I checked the drawing there. The wheel is much bigger, accordingly the wheels in the Albatros D.V kit on the right in the picture, but there are no spares.
I found remaining bigger wheels from a Fokker kit (the dark blue grey), but the tire is thin and the wheel itself too.
Later I found wheels in a Mirage Halberstadt kit, which are not needed. But this are only the tires! I sanded them a little bit thinner.
69
June 5, 2020
On the inner side I cut 0.5mm plastic sheet, but what about the conus on the outer side? I tried deep drawing with a hot air gun, but this fails. I don't have the needed tooling as the experts showed here.
But I have a lathe! So I glued two 1mm sheets and turned a flat conus.
70
June 7, 2020
This cross on the fuselage is the only one without issues.
71
June 5, 2020
I turned also two brass bushes for adapting the nickel silver axle on the left. I think I have now two bulky wheels which look like the ones on the original picture.
I can glue them after painting and don't need masks.
72
June 7, 2020
The other side has a small problem, but this can be fixed with a brush I think.
73
June 7, 2020
I touched the masks multiple times to reduce the tackiness, but it was still to high!
On upper wing it lifted up rib tapes:
74
June 7, 2020
75
June 7, 2020
And on lower wing I lifted up the lozenge decals in big bubbles, lost rib tapes too. I tried to avoid additional damages and removed the mask in small pieces but ...
76
June 7, 2020
77
June 7, 2020
I masked a lot and painted the engine area, the wheels and the prepared small parts with the Gray Green of Drooling Bulldog.
78
June 7, 2020
After unmask it looks nice beside the engine.
79
June 7, 2020
The wheels looks nice. The tire is unpainted. It looks nice, but the four sprue gates are still visible so I should paint the tires too.
80
June 7, 2020
Then I glued the small PE parts in place. Here the right side.
81
June 7, 2020
Some more on left side, also two lids underneath. Please note the bend lids.
82
June 7, 2020
I need a preview for motivation 🙂
83
June 7, 2020
The kit struts of the landing gear are already to short in side view. Not to mention the tilted position!
84
June 7, 2020
The plastic is also very brittle, and also a little bit to wide. So I formed new brass struts.
The copper wires prevent kinking and are relatively easy to remove after bending.
85
June 7, 2020
Both are done. A shaft of the drill helps with the inner diameter of the arc.
86
June 7, 2020
87
June 7, 2020
The tube will be soldered later. After mounting of the lower wings the legs will be shortened to the final size and get some brass pins.
I think it looks like a Albatros landing gear!
88
June 16, 2020
I burnished here the 20 jackets, which are milled or etched brass pipes.
89
June 16, 2020
Then I burnished the 40 turned parts for the gun barrels.
90
June 16, 2020
The PE alloy was a bit special compared to my last sets. It was hard to get them black. Since there are 3 PE set on one sheet I used only 8 sheets for now. 24 parts should be enough for 20 guns.
91
June 16, 2020
Then I glued the barrel parts together. The fit is perfect!
92
June 16, 2020
The details too!
93
June 16, 2020
Another advantage is that I slowly get the hang of it the other parts get better and better. When I build a pair twice a year, I have long forgotten the experience.
Below the Cent four guns are mounted.
94
June 16, 2020
And here is one in a close up. Missed a bit of light this evening for better picture quality.
95
June 17, 2020
16 Spandaus are done. 2 for this project, the rest for the next german aircrafts.
96
June 19, 2020
97
June 19, 2020
Plugged in temporarily:
98
June 19, 2020
With wheels and axle it looks better.
99
June 19, 2020
The other side.
100
June 19, 2020
The distance axle to fuselage is according to the drawings now. Also in the side view it matches.
101
June 21, 2020
On this aircraft only 4 control horns are needed fro the tail plane, the rest is controled internally.
Eduard provided PE parts, but a bit long. I drilled a 0.284mm hole into 0.5mm brass pipes and soldered the pipes to the horns, as visible on the lowest. The I filed away the excess, so I got a stable connection for adding a "One End" turnbuckle, as shown on the right one.
On the PE set there are no spare horns, so I searched for one finished part on the floor the same time, as needed to build all. Damn!
102
June 28, 2020
At first I need some washers for soldering. I don't want to ruin my punch and die set so I do it a different way.
I drilled 1mm holes in a 0.15mm brass PE stripe, cut 5 pieces and soldered on a 1mm brass as block. I trimmed it in my lathe to a round block.
103
June 28, 2020
After desoldering I have 4 identical brass washers, to be soldered onto the nickel silver axle. Luckily I had a spare in the block, because I lost one.
104
June 28, 2020
After clean up the axle is prepared.
105
June 28, 2020
I primed the metal parts with Gunze Mr. Metal Primer painted them with grey green (Drooling Bulldog paint).
106
June 28, 2020
After painting the lower sharp bend with leather color I connected the parts by using bright grey stretched sprue as rubber simulation. In the middle the brown leather paint is visible, I forgot a picture.
107
June 28, 2020
And that is the view from top. I hope, the sprue can hold the heavy model! I secured it with CA.
108
June 28, 2020
And the final view with wheels.
The tires are not painted. Should I left them as they are or paint them too?

1 13 December 2019, 21:01

Erik Leijdens
Yet another Masterpiece I presume 🙂

13 December 2019, 22:15

bughunter
Welcome to the show, Erik! I added pictures of the working set adjustment.

14 December 2019, 12:20

Derek Huggett
Look out! bughunters at it again! (Great!) 🙂

14 December 2019, 12:24

Erik Leijdens
Amazing work with the adjustable seat! The leather looks great too.

14 December 2019, 12:56

Stefan Fraundorfer
I'm in and I'm looking forward to another spectacular model of yours. The seat is great!

14 December 2019, 13:31

Greg Baker
Oh fer... may as well sign me up. Ho hum... another eye popping project from Bugsy... what else is new. Perfection has become mundane.

14 December 2019, 14:39

Danny Meer
Is that seat taken? 😄

14 December 2019, 15:33

Slavo Hazucha
Lots of wings... good 🙂 Joining the line-up of spectators!

14 December 2019, 18:09

Chris Greathouse
Sweet!

14 December 2019, 18:11

bughunter
The congregation is gathered! A warm welcome to all of you 👍

14 December 2019, 18:23

David Taylor
green monster arrived again.

14 December 2019, 18:31

bughunter
Thx David! As some of you notice (and a admin, who attached the album to the project), this is _NOT_ a Fokker Dr.I but an Albatros Dr.I. It was a unique specimen, abandoned after flight test.

15 December 2019, 10:17

Slavo Hazucha
And now I actually noticed the other 2 guys on the artwork are D's not Dr's! Were there other German series or close to series Dreideckers except the Fokker & this one in WWI?

15 December 2019, 11:17

bughunter
Yes Slavo, since this was the only Dr.I, the performance was compared against normal Albatros biplanes in flight test. For another converted Pfalz D.IIIa see here: Pfalz D.IIIa Triplane Experimental | Project by bughunter (1:48) Compare against the original!
A Pfalz Dr.I is also famous, but there are much more! I own the book "The Fighting Triplanes" and this contains around 25 german triplanes, plus some Austria-Hungary. Also the other nations build a lot of types, the Sopwith Triplane created a Triplemania 😉
I will build in future some more triplanes, and own a kit for a quadruplane 🙂

15 December 2019, 11:48

Wim van der Luijt
Crap on a cracker! That is already very impressive, will it have a working engine too? 😉

15 December 2019, 13:58

bughunter
I will try to add a Vector engine again, but I'm not sure yet about fitting.

15 December 2019, 14:30

Christian Bruer
Excellent start on this unique aircraft 👍

15 December 2019, 18:08

Alec K
Very interesting project. Taking the seat in back, as the auditorium is damn crowded already...

15 December 2019, 22:05

bughunter
Welcome all! It's nice to show something different 👍 More pics the next days ...

15 December 2019, 22:40

Slavo Hazucha
Thanks for the clarification - I suspected there will be some, but not such a full crowd of followers to the Triplane 🙂

16 December 2019, 10:05

bughunter
Slavo, there are more crazy types, like a triple Triplane
en.wikipedia.org/wiki/Caproni_Ca.60
or a Fokker with five wings:
en.wikipedia.org/wiki/Fokker_V.8
;)

16 December 2019, 18:45

bughunter
After the wood painting of the cockpit parts the air screw is finished.

17 December 2019, 17:53

Stephan Ryll
Looking very good 👍

17 December 2019, 18:25

Slavo Hazucha
Excellent woodwork - although the color assembly on pictures with the direct light would also do justice to a Premium Praline...😉 Excellent weathering on the 1-cent coin too😉😉

Seriously - I really admire the way how you manage to do basically the same thing top pro & always in a different touch and finer details of appearance... 👍

17 December 2019, 19:01

Ben M
watching and learning.

17 December 2019, 19:57

bughunter
Thx! Slavo, you spotted a very bad experience: this April, during work on my Fokker D.VII, I managed to destroy a glass bottle with Alclad black primer with shaking and the ball inside 🙁 Black primer everywhere, on my face, T-Shirt, bench, wall, lamps, parquet, it also ruined the fuselage halfs of the Fokker. The finished wings survived. The smell was really heavy. So this black dot on the Cent is a reminder, to shake those glass bottles only in a Zip-lock!
Regarding the propeller: Since this Dr.I was a unique specimen only two pictures are known (I added them to the project header), so I looked at the side view of the prop and used different kinds of wood accordingly. The shape is may be not correct, I used the Windsock drawing.

17 December 2019, 20:07

Alec K
I had no idea you can break a paint bottle just by shaking it. Or did it fly out of your hand and hit something??

17 December 2019, 20:21

bughunter
No, the bottle was no more full, so the ball could reach a speed in the internal air high enough to crack the glass. I noticed during shaking, that my hand gets cold and wet somehow - too late 🙁

17 December 2019, 20:29

Paul Juliano
Been there, bughunter, but it was more my fault! I just forgot to screw the cap on all the way. Luckily I look good in Russian Tan.

17 December 2019, 20:54

bughunter
The cockpit is prepared so far, but need to do the engine, before the fuselage can be closed.

21 December 2019, 19:25

Derek Huggett
He calls it 'a nice cockpit'...it's an amazing cockpit! Really great stuff! 👍 🙂

22 December 2019, 09:37

bughunter
Thank you Derek! I assume the build of the engine and the closing of fuselage is delayed due to X-Mas.

23 December 2019, 13:49

gorby
Fantastic!
I wouldn't expect anything less from the master modeller himself.😉

23 December 2019, 15:44

Michael Hickey
That cockpit is beautiful.👍👍👍

23 December 2019, 22:54

Slavo Hazucha
I guess even your christmas tree pales in envy loking at your woodwork & "decorations" you put on those builds...😉 Have a nice Christmas!

24 December 2019, 09:30

Bernhard Schrock
As usual I'm fascinated: wood looks like wood and leather upholstery looks as comfortable as my own arm chair at home🙂

24 December 2019, 12:05

Spanjaard
amazing as always

25 December 2019, 21:24

bughunter
Oh sorry mates, have not answered yet - thank you very much! Due to the X-mas Cutting machine present I recovered the project Sopwith Schneider Monaco | Project by bughunter (1:48) But this is done now, so I will continue to work on this triplane.

15 February 2020, 13:31

Alec K
👍

16 February 2020, 18:39

bughunter
Continued on the triplane, only some small steps done.

18 February 2020, 18:58

bughunter
Engine finsihed, so the fuselage halves are closed now.

23 February 2020, 18:21

Slavo Hazucha
At least we've seen it before the burial in the fuselage! Now we all see through the plastic & know what's hidden inside...😉

3 March 2020, 09:52

Predrag Ivanovic
Another masterpiece, great looking three wings Albatros

3 March 2020, 21:08

wilky
At least you don't have to decide which scheme to do with this one

3 March 2020, 21:16

bughunter
Thank you mates!
@wilky That's not so nice of Eduard to write "Profipack" on the pack and then only allow one marking! 😄 😄 😎
After the finish of the Benz Motorwagen 1886 | Album by bughunter (1:24) continued on this Albatros, pictures soon.

27 March 2020, 17:25

Alec K
The wood looks fantastic 👍

28 March 2020, 11:04

bughunter
Thank you Alec! Fighting now against a huge amount lozenge decals on 3 wings 😮

28 March 2020, 18:09

Alec K
May you win this battle 😄

28 March 2020, 19:23

Slavo Hazucha
Making such immaculate wood replica on places where it can be seen = top-class modeling

Doing it even on the connection-planes for the elevators = bughunter...😉 👍

29 March 2020, 08:21

Martin von Schreckenstein
missed the start! I will be wathing the rest no doubt. looking great so far.

29 March 2020, 08:55

bughunter
Oops, have not answered yet. Thank you Alec, Slavo and Martin!
Since the Dolpin project is on hold due to waiting for parts and continued with rib tapes on this Albatros.

3 May 2020, 18:24

bughunter
The ailerons are finished. They are not big, so handle the edges and joints needs to be done very carefully. Looks better then the wings itself.

8 May 2020, 20:51

René "Lord Bilbo" Bartholemy
Love it so far! 👍😉

23 May 2020, 12:32

Slavo Hazucha
That's one spectacular looking tail... I'm sure it would make the cover page of a mermaid fashion magazine...😉 👍

24 May 2020, 08:32

bughunter
Thank you mates! 👍
@John, we have the pictures, so we all know that the details are there 🙂
@Slavo ... mermaid fashion magazine ... 🙂 🙂 🙂 I love your crazy ideas 👍

24 May 2020, 09:17

bughunter
Today the decals on the rudder crumbled when I wanted to make the cut for the separation seam. Really great! 👍 So I was forced to cut masks for the crosses for the first time, which became much nicer!
Again improvement by accident! 🙂 I think I will paint the other crosses too.

30 May 2020, 19:25

Alec K
Nice work on those crosses 👍

31 May 2020, 11:37

bughunter
Thx mates! Lozenge is applied, but some edges needs attention after drying. May be half of the rip tapes is done and some are applied on the leading edges. But how the hell are you supposed to attach the narrow straps to the trailing edge? Do you have a trick or an idea?

31 May 2020, 11:59

Alec K
Looks like you found a way. Can you please explain how Future helped? It does not exactly dry fast...

1 June 2020, 13:00

bughunter
My nickname is Bughunter, and that I have done today. Found bugs in the Datafile drawings.
Alec, Aviattic recommends in the manual to fix loose edges of decals with Future, btw Small Stuff also for mounting small parts on the engines. It is nearly invisible after drying.

1 June 2020, 20:15

Alec K
Thanks for the info. I apologize if you already answered this, but what is the rib tape material you are using?

That surgery looks painful...😄

2 June 2020, 11:51

bughunter
Alec, that are very old Pegasus decals printed 1994. I got some sheets of different types from a friend who moved to the big WNW (come to the dark side of the) scale completely. The lozenge itself looks strange, but the tapes are nice. A quarter of a century old and still working 👍

2 June 2020, 17:26

Alec K
Got it, thanks. I never used decal over decal before.

Darkside, huh? What is the 72nd scale then? The "light" side? 😄 😄 😄

3 June 2020, 13:04

bughunter
Decals on top of decals is no problem. Some machines used also lozenge rib tapes. The normal Aviattic decals are translucent, but for those tapes they offer also not translucent sheets.

I know a 72nd scale modeler who calls it always "God's Own Scale" 🙂

3 June 2020, 15:35

Alec K
I am assuming you first seal the lower decal layer with clear and then apply the second layer? I would be concerned about using decal setting liquids otherwise.

I am not one to propose that 1:72 is better than any other scale, as those espousing such slogans seem to imply😉

3 June 2020, 17:29

bughunter
You may seal the first layer, but it is not necessary. The decals are gloss and I have no need for setting liquids fro the rib tapes. There are no panel lines and the surface is smooth.
Actual state: 3,30m rib tapes applied (no joke!), and this task is not completed yet! 😠

3 June 2020, 20:11

Ben M
I do not enjoy decaling, so I think I better stay away from WWI German aircraft 🙂

3 June 2020, 20:45

bughunter
After big fail with the decals ... I dropped the project, äh, ... no. I started with something different: the wheels.

5 June 2020, 19:13

wilky
So what exactly happened with the Future?
Did it whiten?
What is the solution for the problem?

5 June 2020, 22:31

bughunter
wilky, the Future was not the problem. The problem is, that there are 5 decals coming together on the trailing edge. Lozenge up and below, and rib tapes on top on both sides. The problem was the decals gets lose, shrinkled and bubbles. And the applied Future fixed them in that broken position.

This project does not seem to be under a good star. I'm just screwing up right now! Now I destroyed the rest of the decals during unmasking after painted the crosses. 🙁

7 June 2020, 15:38

Thomas Bischoff
Now the bugs hunt you - hope you can turn the tide again!

7 June 2020, 15:45

Ben M
If anyone can figure it out, it's you bug hunter

7 June 2020, 18:53

bughunter
Thank you Thomas and Ben! After the trouble I put the wings aside for now.
With some other work I like to go back to my comfort zone😉 A rainy Sunday on the bench with some success.

7 June 2020, 19:16

Bernhard Schrock
Pictures 80 and 81: how do you managed gluing the small PE parts so clean? Top work.

7 June 2020, 20:01

bughunter
Bernhard, it is not so clean as I wanted, because one this little beasts jumps out of the tweezers on the model, grrr. I use CA gel, the product is called "100% Sekundenkleber". I preformed the PE maintenance lids prior painting to a "light ball", which helps for glueing too.
Lochsa_River, fill in "Drooling Bulldog" into the Scalemates search engine and you will be enlightened😉

7 June 2020, 21:15

Slavo Hazucha
Come on, admit you bent the plastic parts a bit under hot water to get a "casus belli" to make that magnificent composite metal gear assembly...!😉

8 June 2020, 10:22

bughunter
Thank you Markus for your nice comment, but I think my other builds are much better.
Slavo, the bending is not the problem - the legs are to short! The axle needs to sit on top of the arc, and the struts are slanted in real. That is why Eduard's albatrosses sit notoriously low in front!

8 June 2020, 13:41

bughunter
My last experimental triplane, the Pfalz D.III conversion was unarmed, but this Albatros needs two Spandaus. We live in wonderful times and can buy beautiful accessories, like this set from Master. I have now 5 models in my cabinet with those Spandau sets, the last ones I have mounted on the Albatros W.4.

When it was clear that my stock was exhausted I had ordered a larger quantity some time ago, 10 packs of these pairs, to be exact. There are still enough Fokker, Albatros, Roland, Pfalz, Siemens-Schuckert ... boxes in my stash to put them in. So you can negotiate a good price and it also offers advantages in building.
To get the wonderful details I burnished the parts. I can only recommend not to burnish all parts at once, because they are made of different brass alloys. These react differently to the chemical liquid and it is difficult not to expose the fine particles to chemical attack for too long.
On the other hand, I can now burnish equal parts at once, without too much extra work, and have effective control over the times. Since my liquid has to be heated up to 80-90°C in a water bath, this is always time-consuming.

I think standardization is very nice, so that the German aircraft all had the same Spandaus in use😉

16 June 2020, 20:42

Spanjaard
guns looking great. good idea to burnish them.

17 June 2020, 00:14

Alec K
Looking glorious 👍

17 June 2020, 11:40

bughunter
Thx mates! All my german aircrafts (Pfalz, Albatros, Siemens-Schuckert, Fokker,...) are equipped with (I learned a better phrase today) black oxide finished Spandau guns. Last time I have done 5, the new batch will last longer I hope😉

17 June 2020, 20:19

Bernhard Schrock
Schade dass es keine Gunship - Version der Albatros gab...🙂

18 June 2020, 05:13

Slavo Hazucha
Maybe an experimental Zeppelin Staaken gunship? Surely would look great with these 😄

Nowadays I actually keep a 1-cent coin around just in case bughunter releases some pics, to have a real-world size comparison & reminder at hand... Wonderful stuff - quite excellent source PE material for sure, particularly the aiming crosses, and what a finish... Top notch! 👍

18 June 2020, 11:16

David Andrs
Joining in late, but also watching... 👍

18 June 2020, 12:11

Predrag Ivanovic
Perfect modelling skils , as usual with your models. One questions about landing gear struts on picture 83. Plastic is almost like in the drawing ,dimensional, and ,as I recall on this Eduard Albatros models is about 3mm shorter on both sides. At the end, you made it longer in brass. What is correct?

18 June 2020, 12:45

gorby
I saw photo 95 and thought 'Good god, how heavily armed was this thing!'. Incredible work on those guns Frank - tiny works of art.

18 June 2020, 16:50

bughunter
Thank you mates! Your funny answers make me smile 😉
I did not understand, which Eduard Albatros are 3mm shorter? This Dr.I is in principle a D.V, in the Windsock "Albatros Experimentals" the text of the Dr.I mention also the D.V drawing including page number in the Albatros Fighters Special.
On my pic83 you see, that the axle would go through the strut, but in real it sits inside (on top) of the strut (so the strut needs to be longer), see the following pic on WingNutWing site:
[img1]
Additionally, the drawing in pic 83 shows a side projection. But the struts needs to be longer in real due to Inclined position, again a pic
[img2]
I'm not sure yet about the real length, will be shortened during mounting.

18 June 2020, 17:01

Predrag Ivanovic
I meant for Albatros D. V, Thanks for detail answer.

18 June 2020, 19:05

Christoph Kunz
Massproduction of guns.. Do you have a license? Gunship Zeppelin? What's going on? I think I missed something important...

18 June 2020, 20:08

Derek Huggett
Note to self. - Must get 50%+ enlarged copy of 1c or 1p coin for my photos!! Are Deutsche Waffen und Munitionsfabriken aware of their 'bughunter factory'? Excellent, as we have come to expect! 👍 🙂

19 June 2020, 09:56

Roland Sachsenhofer
Simply incredible and beautiful! I can't get enough of it....just the homemade landing gear makes your heart beat faster. I won't miss any more construction progress here! 🙂

19 June 2020, 19:29

bughunter
Thank you very much!
Derek, I can recommend a bug Cent from magic supplies😉
After the guns I decided to continue with the adjustment of the landing gear. It took longer the expected and must be done carefully to avoid scratches in the fuselage.

19 June 2020, 19:30

bughunter
Oh, I missed your answer Roland, our postings was at the same time😉 Thanks and welcome! I hope this ends up not in a heart attack!

20 June 2020, 13:24

bughunter
I made the control horns. This soldering reminds me that I really like it, so I started something different. More soon!

21 June 2020, 20:16

Daniel Klink
Wonderful woodwork Frank..
The overall detailwork is simply incredible and awesome...ans somehow stretching the limits already..
Great Mate

21 June 2020, 20:30

Alec K
Looking over your album again, just to get some inspiration going... 👍

22 June 2020, 10:56

Greg Baker
I do that too... and then the desperation sets in instead....

22 June 2020, 14:47

bughunter
Thank you my freinds, but the decal problem bring in a delay. I need to try some paints urgently, so I doing a different project in parallel.

22 June 2020, 19:44

David Taylor
Are you doing Black Maria Bughunter

23 June 2020, 17:05

bughunter
Yes David, that is another active project (see my projects). At the moment I'm jumping between active projects. I made metal landing gear for both.

23 June 2020, 18:53

bughunter
The landing gear was not yet finished, axle and suspension are missing. So let's continue on that one.
The base was a picture set of James Fahey of an Albatros D.V, thank you very much!
I like the look of the fully scratched metal landing gear, even if the suspension is not working😉

28 June 2020, 16:19

Thomas Bischoff
The landing gear in itself is a masterpiece and I am happy to hear that there is room for improvement :-;
Next time a working suspension please .....

28 June 2020, 17:35

Marcel Klemmer
Unbelievable Bughunter...

28 June 2020, 18:14

Roland Sachsenhofer
.....indeed! Hard to believe, pure joy to see!

28 June 2020, 18:47

David Taylor
above and beyond

28 June 2020, 21:22

Alec K
That suspension is great. I dunno about those tires. I would paint, just to get some toning.

28 June 2020, 21:53

bughunter
Thank you mates 👍 The problem with the working suspension is only to find some rubber, which can hold the model and is stable in long term. The mechanical parts are already prepared😉

29 June 2020, 13:59