"DONE" Grunau 9 Glider - "Nürnberger Ei"

1
July 11, 2021
2
July 11, 2021
Same status as with my Grunau SG38 build. Need some Touch up and then ready for assembly and rigging.
3
July 18, 2021
From some remaining PE sheet I cutted the elbow fitting for the aileron.
4
July 18, 2021
Some stretched sprue is used for the wire.
5
July 18, 2021
Wire and fitting installed.
6
July 18, 2021
The wood effect on the "cabin" is giving me some hard times - I not sure how close to edges I can go with the decal stripes before I close the shell. I fear that the seam is very visible then,...
7
August 8, 2021
Preparing some "aid" material for the rigging - made from sprue.
8
August 8, 2021
Some additional material for rigging. Cutted and sanded from evergreen sheets.
9
August 8, 2021
All the wires are ready for the installation now.
10
August 8, 2021
Some final adjustments on the model are needed.
11
August 8, 2021
I insert some pieces of brass tube to simulate the mounting points espectively guide pulleys for all the wires for the control surfaces.
12
August 12, 2021
Sooo...rigging started.
13
August 12, 2021
I choose to start with rudder and elevator first. What can I say? PA clue was sticking on everything but the right ends of my wire - btw. the elevators broke loose twice,...But: finally - everything's fine 😉
14
August 12, 2021
Some more details on the wing...before we put them on.
15
August 12, 2021
Now with wings attached....
16
August 12, 2021
...and steering wires in place - lets go working on the "cockpit".
17
August 29, 2021
18
August 29, 2021
19
August 29, 2021
20
August 29, 2021
21
October 2, 2021
The "cabin" is finally finshed - I'am quite happy with the result.
22
October 2, 2021
Now the rigging of the wings start....I saw some pictures where the anchor of the wire and the turnbuckles near the the wingsurface is prodected with a kind of cover. Therefore you see this "V-shapes".
23
October 2, 2021
Riging of under wing went quite good.
24
October 2, 2021
Lowerside is done !
25
October 2, 2021
Only 4 wire to go,... but I gave up last night as - bad luck - I cutted a already installed wire per incident. Let's see how it will work out during the next session.
26
October 9, 2021
The last session was succesful 🙂 all wires installed finally.
27
October 9, 2021
I guess I can call this tinky glider "Done" now.
28
October 9, 2021
I will add some more pictures of this "Nürnberger Ei" soon when I have prepared my photocamera (with is slight better than my old mobilphone lense 😉)
29
October 10, 2021
30
October 10, 2021
31
October 10, 2021
32
October 10, 2021
33
October 10, 2021
34
October 10, 2021
35
October 10, 2021
36
October 10, 2021
37
October 10, 2021
38
October 10, 2021

27 11 July 2021, 18:56

Robert Podkoński
Watching this one as well 😉

11 July 2021, 19:05

Juergen Klinglhuber
Hi Robert - same story with this one as with the Sg38. Not many parts but still a tricky job. This one as a "Cockpit cabin" where I played alot (hours 🙂) with the wood effect... I hope it was worth it at the end...let's see.
thx for you interest.

11 July 2021, 19:13

Robert Podkoński
Looks perfect, Juergen, absolutely. Rigging is exactly what I find beyond my patience (if not my skills) for the moment - but in case of these gliders rigging adds the final interest. Keep up good work, surely it is worth the effort 🙂

11 July 2021, 19:19

Alex K
Taking a seat...

11 July 2021, 20:06

Skyhiker
Interesting

12 July 2021, 20:33

Juergen Klinglhuber
Welcome Alex and Skywalker. Here is a little up-date. Wires for the aileron movement are installed. I made some progress on the "cabin" too.

18 July 2021, 20:35

Robert Podkoński
Who would say that there is so much to do with a simple glider's model...;) I am impressed with your work already.

8 August 2021, 17:25

Juergen Klinglhuber
Thx Robert - some updates I put into the album today.....

12 August 2021, 08:35

Skyhiker
What are you using for rigging?

12 August 2021, 19:43

Scott
Really great

12 August 2021, 19:45

Juergen Klinglhuber
@Skywalker - I use viscoelastic yarn (product: Rig that Thing - shop: Uschi van der Rosten).

12 August 2021, 20:24

Juergen Klinglhuber
thx Scott.

12 August 2021, 20:25

Alex K
Some nice work going on here - I very much like what I see... 👍

12 August 2021, 23:23

Alex Rodionov
Nice work. ?

13 August 2021, 03:38

Thomas Espe
Great work!

13 August 2021, 05:48

Mark K
Beautiful

13 August 2021, 07:38

Juergen Klinglhuber
Thx Alex K & Alex R. thx Thomas & Mark
I am glad you like it.

15 August 2021, 20:45

Juergen Klinglhuber
The "Cockpit" of the Nürnberger Ei is mounted,....

29 August 2021, 20:43

Stefan Schacht
well done

29 August 2021, 20:44

Alex K
indeed! 👍

29 August 2021, 21:08

Paweł W.
👍

30 August 2021, 08:19

Juergen Klinglhuber
A little progress,...

2 October 2021, 11:16

Juergen Klinglhuber
Thx Major Flannel.
The Grunau 9 Glider in the "egg" config is finshed now. DONE with this project....the Glider 38 is close to be finsihed too. Thx for watching and your interesed.

9 October 2021, 09:58

Robert Podkoński
Fantastic work, Juergen - I am sure we all are waiting for more photos here 😉

9 October 2021, 12:24