Hobbyboss Soviet T-30S Light Tank
![Album image #1 Album image #1](/albums/img/0/0/2/1375002-56165-22-720.jpg)
Here's all the parts, except for the tracks, which come as seven sprues of individual links. I won't be using those. The Masterclub set are on order.
![Album image #2 Album image #2](/albums/img/0/9/5/1375095-56165-55-720.jpg)
Stage 1 done, except for fitting the return rollers.
![Album image #3 Album image #3](/albums/img/7/7/3/1375773-56165-35-720.jpg)
Two evenings in and it's starting to take shape. I lost some time last night when I managed to knock over an almost full bottle of thin superglue. Luckily, it missed all three kits on the bench. Step 6 of the assembly tells you to cut some rivet heads off a strip of plastic & attach them in position. Might help if they had included them in the kit.
![Album image #4 Album image #4](/albums/img/3/1/2/1376312-56165-93-720.jpg)
Most of the major joints need some attention. Mr Surfacer to the rescue.
![Album image #5 Album image #5](/albums/img/1/3/5/1378135-56165-64-720.jpg)
The Mr Surfacer has been cut back with Mr Colour Levelling Thinners. It will need a little patching, but is okay on the whole.
![Album image #6 Album image #6](/albums/img/1/3/6/1378136-56165-77-720.jpg)
Further progress and a test fitting of the wheels.
![Album image #7 Album image #7](/albums/img/1/3/7/1378137-56165-21-720.jpg)
![Album image #8 Album image #8](/albums/img/1/8/4/1379184-56165-78-720.jpg)
The headlight bracket is PE, the headlight lens is, disappointingly, not a transparent part. An odd decision given the amount of PE, wire & metal gun barrel included. I've sent off for some third party lenses.
![Album image #9 Album image #9](/albums/img/1/8/5/1379185-56165-40-720.jpg)
The horn is four parts alone and very fiddly to assemble.
![Album image #10 Album image #10](/albums/img/1/8/6/1379186-56165-44-720.jpg)
The turret comes with a choice of armament. I've gone for the basic metal barrel but there is a slide moulded plastic one too. The other option is the 20mm ShVAK automatic cannon.
![Album image #11 Album image #11](/albums/img/1/8/7/1379187-56165-43-720.jpg)
Apart from a little tidying up, I can't do a lot more until euther the tracks or the headlight lenses arrive.
![Album image #12 Album image #12](/albums/img/1/8/8/1379188-56165-25-720.jpg)
I can't believe how quick this has gone together.
![Album image #13 Album image #13](/albums/img/1/8/9/1379189-56165-35-720.jpg)
See that thin plastic rod? Broken it twice so far. Really needs to be metal.
![Album image #14 Album image #14](/albums/img/1/9/5/1379195-56165-37-720.jpg)
I did have some spare rivets from the BA-20. It does look like something should be fitted in the middle of the rear armour, above the hook. Nothing in the instructions. Nothing likely looking on the sprues. I suspect it's a leftover from the amphibious T-30 kit
![Album image #15 Album image #15](/albums/img/5/8/0/1390580-56165-52-720.jpg)
Primed, base coated and 2nd camo colour done, although it might want a third coat. (Edit: This morning I found the worst brush marks ever in the tan paint. It'll have to go.)
![Album image #16 Album image #16](/albums/img/7/1/8/1391718-56165-61-720.jpg)
After removing the tan colour with IPA & cotton bud, I gave it a quick coat of green again. Then it got a coat of semigloss varnish.
![Album image #17 Album image #17](/albums/img/7/1/9/1391719-56165-31-720.jpg)
Then it got the dark green wash treatment.
![Album image #18 Album image #18](/albums/img/7/2/0/1391720-56165-37-720.jpg)
This was followed by a filter. You can see the rivets on the rear that are not in the kit.
![Album image #19 Album image #19](/albums/img/7/2/4/1391724-56165-24-720.jpg)
And this, in turn, by chipping.
![Album image #20 Album image #20](/albums/img/0/8/7/1392087-56165-19-720.jpg)
Test fitting wheels, tools, etc.
![Album image #21 Album image #21](/albums/img/0/8/8/1392088-56165-18-720.jpg)
The earth pigment around the running gear still needs a bit of a tweak.
![Album image #22 Album image #22](/albums/img/0/8/9/1392089-56165-22-720.jpg)
I'm not very happy with the tow cable, but I guess I can live with it.
![Album image #23 Album image #23](/albums/img/0/9/0/1392090-56165-99-720.jpg)
The exhaust is still recovering from getting a coat of rust pigment, so I skipped that part for now.
![Album image #24 Album image #24](/albums/img/0/9/1/1392091-56165-24-720.jpg)
![Album image #25 Album image #25](/albums/img/7/8/5/1394785-56165-38-720.jpg)
Masterclub T-30 tracks. I must be mad. I need 172 links out of 220 in the box. There are so many either miscast or broken, that it's going to be a close call. Don't even get started on the track pins (0.4mm dia). I've had up to half a dozen ping out the tweezers before getting one in the hole. I'll be finding them in odd places for the next five years or so. Then, when you pick the track up, several fall out again. No glue required, it says. Ah well, half way there.
![Album image #26 Album image #26](/albums/img/8/3/4/1395834-56165-55-720.jpg)
Tracks done & fitted. The kit says 86 links per side. I've got 92. Maybe I'd get away with 91. Needless to say, several track pins either broke or fell out during the process. One issue was the fact that the holes in the tracks are not wide enough for the drive sprockets to fit into, so I sanded the teeth down a bit. It's not perfect, but there is only so much material that can be removed.
![Album image #27 Album image #27](/albums/img/9/6/7/1395967-56165-67-720.jpg)
Nearly done. The track pin heads need a dab of chipping colour to blend them in, then all it needs is a good coat of matt varnish.
![Album image #28 Album image #28](/albums/img/9/6/6/1395966-56165-18-720.jpg)
![Album image #29 Album image #29](/albums/img/9/6/8/1395968-56165-25-720.jpg)
![Album image #30 Album image #30](/albums/img/9/6/9/1395969-56165-26-720.jpg)
![Album image #31 Album image #31](/albums/img/9/7/0/1395970-56165-75-720.jpg)
![Album image #32 Album image #32](/albums/img/9/7/1/1395971-56165-24-720.jpg)
![Album image #33 Album image #33](/albums/img/5/6/4/1396564-56165-67-720.jpg)
Finished! The last few little tasks are done and the matt coat applied.
![Album image #34 Album image #34](/albums/img/5/6/5/1396565-56165-67-720.jpg)
![Album image #35 Album image #35](/albums/img/5/6/6/1396566-56165-67-720.jpg)
![Album image #36 Album image #36](/albums/img/5/6/7/1396567-56165-35-720.jpg)
![Album image #37 Album image #37](/albums/img/5/6/8/1396568-56165-72-720.jpg)
![Album image #38 Album image #38](/albums/img/5/6/9/1396569-56165-62-720.jpg)
![Album image #39 Album image #39](/albums/img/5/7/0/1396570-56165-81-720.jpg)
![Album image #40 Album image #40](/albums/img/5/7/1/1396571-56165-69-720.jpg)
![Album image #41 Album image #41](/albums/img/8/8/8/1398888-56165-70-720.jpg)
Daylight shots, as promised.
![Album image #42 Album image #42](/albums/img/8/8/9/1398889-56165-94-720.jpg)
![Album image #43 Album image #43](/albums/img/8/9/0/1398890-56165-70-720.jpg)
![Album image #44 Album image #44](/albums/img/8/9/1/1398891-56165-56-720.jpg)
![Album image #45 Album image #45](/albums/img/9/0/3/1398903-56165-47-720.jpg)
![Album image #46 Album image #46](/albums/img/9/0/4/1398904-56165-57-720.jpg)
![Album image #47 Album image #47](/albums/img/9/0/5/1398905-56165-14-720.jpg)
![Album image #48 Album image #48](/albums/img/9/0/6/1398906-56165-22-720.jpg)
![Album image #49 Album image #49](/albums/img/9/0/7/1398907-56165-53-720.jpg)
![Album image #50 Album image #50](/albums/img/9/0/8/1398908-56165-31-720.jpg)
![Album image #51 Album image #51](/albums/img/9/0/9/1398909-56165-27-720.jpg)
评论
24 5 January 2023, 16:17
![](/profiles/img/56165-775-s.jpg)
Thanks, Villiers. While the Mr Surfacer is curing, I'm fettling the wheels. I've had to open up the holes in the road wheels a bit as they wouldn't go on the mountings at all.
7 January 2023, 20:52
![](/profiles/img/118183-835-s.jpg)
Coming along 👍 Sounds like a bit of a fiddly kit. That's strange about the rivets. Seems like that's something which could have been molded in. Maybe someone made a mistake when cutting the molds and figured the cheapest fix was to have the builder take up the slack!
8 January 2023, 01:17
![](/profiles/img/56165-775-s.jpg)
The rivets go on the upper rear armour plate, so they would need to slide mould that part to get them on. I think I've got some in my spares box.
8 January 2023, 13:50
![](/profiles/img/118183-835-s.jpg)
That looks painful and tedious, good job persevering. Sorry about the pins but the carpet monster must be fed!
3 February 2023, 23:03
![](/profiles/img/48972-166-s.jpg)
For me tracks are always a challenge, John... They're looking really good.
6 February 2023, 21:27
![](/profiles/img/56165-775-s.jpg)
Thanks, all. I'll add a few shots in natural light, next time I see any...
7 February 2023, 18:36