Grumman F8F-1 Bearcat (Sword)

1
May 22, 2023
The Sword kit has a reasonably nice rendition of the engine in resin.
2
May 22, 2023
These big honking ejection towers need to go bye-bye before the engine can go in.
3
May 22, 2023
A little Alclad, some Gunze, and a Future wash (liquid skill) and the engine looks OK.
4
May 22, 2023
The cockpit was enhanced by instrument and control decals, and some photoetch rudder pedal and seat harnesses.
5
May 22, 2023
A better view of the harnesses.
6
May 22, 2023
I drilled out the lightening holes in the tailwheel as they are quite prominent.
7
May 22, 2023
Basic assembly complete. Not much filler was required, the fit was quite good.
8
May 22, 2023
When you drill out the axle holes and go too far (i.e. right on through) you need to fix your mistake. A couple of styrene discs made with a punch and die set came to the rescue.
9
May 22, 2023
Up on her legs. I added some additional actuator struts to the main gear.
10
May 22, 2023
I also added the small vanes in the intakes on the leading edge of the wings.
11
May 22, 2023
The Glossy Sea Blue is from MRP - very smooth and glossy finish.
12
May 22, 2023
Another view.
13
May 22, 2023
The stickers came from Starfighter decals. I'm not sure that the background to the Felix the Cat artwork is white - many sources show this as yellow.
14
May 22, 2023
The decals reacted beautifully to the decal solvents from Microscale.
15
May 22, 2023
Adding the gun sight, wheels, gear doors, wing pylons, drop tank, and the main gear strut torque links.
16
May 22, 2023
I used a semi-gloss clear to provide, in my view, a more realistic "scale gloss."
17
May 22, 2023
Finishing the prop.
18
May 22, 2023
The kit's rollover structure is pretty lame, and doesn't really look like the real thing.
19
May 22, 2023
So I built a new one from card stock and styrene rod.
20
May 22, 2023
Adding the rest of the bits including the canopy, rockets, prop, whip antenna, and aerial wire.
21
May 22, 2023
This was a quick build, and I hope you enjoy the rest of the photos. Cheers!
22
May 22, 2023
23
May 22, 2023
24
May 22, 2023
25
May 22, 2023
How do you see when you're driving this baby?
26
May 22, 2023
27
May 22, 2023
28
May 22, 2023
29
May 22, 2023
30
May 22, 2023
31
May 22, 2023
32
May 22, 2023
33
May 22, 2023
A couple of late war hot rods! The Sea Fury is the Aki Products resin kit that I built a while back.

19 22 May 2023, 22:27

Bill Gilman
Hi mates, here's a quick build I did at the end of last year. It's the Sword 1:72 F8F-1 Bearcat. It's really a nice little kit and went together well. I didn't have to add too much extra detail but I couldn't resist tweaking a few things. Hope you enjoy the pictures. Cheers, Bill

22 May 2023, 22:48

Ben M
Always good to see a F8F. I plan to do one in the Thai livery.

22 May 2023, 23:28

Album info

1:72 Sword kit

Grumman F8F-1 Bearcat

33 图片

1:72

已完成

1:72 F8F Foreign Bearcat (Sword SW 72022)

1:72 F8F-1 Bearcats Part 2 (Starfighter Decals 72-121)

所有相册

查看所有相册 »

Grumman F8F-1 Bearcat (Sword)

评论

Album info

所有相册