Kaman K-Max, Rotex AG
- 比例:
- 1:72
- 状态:
- 已完成
- 已开始的:
- November 2, 2013
- 已完成:
- June 25, 2015
- 用时:
- 40 hours
Finished model of the Attack Squadron kit. Decals are custom made.
项目库存
完整套件
/zh/search.php?q=*&fkMATEID[]=11786&showast=no&fkWORKBENCH[]=WB11786&page=projects&project=14428?
相册
评论
6 20 July 2015, 08:46
![](/profiles/img/11836-205-s.jpg)
Really nice! 👍 But I think you should turn one of the rotors 90 degrees.
20 July 2015, 11:37
![](/profiles/img/11786-s.jpg)
no, you may read the comments on my Flickr album
(flic.kr/s/aHskdCT8Bn)
I have put the rotors into their "service" position 🙂 this is usually done if the heli needs maintenance and is stored in a hangar.
But you are are right the Flettner system like the one at the K-Max has intermeshing rotors which have an offset of 90° - in "operation" mode.
Btw, having the rotors that way saves me space too, now the model fits easily in my display case 😉
20 July 2015, 12:20
![](/profiles/img/16672-187-s.jpg)
This "Flettner-double-rotation-drive" is interesting. One should normally think that both blades collide with each other as they are mounted same height. Somehow it is synchronised and one blade rotates "over" the other. I thought that the KAMOV drives are complicated ...but this tops it again! Grützi in die Schweiz!! Nice Model Ueli
20 July 2015, 14:41
![](/profiles/img/84702-396-s.jpg)
The two rotor discs are mounted at a slight angle to each other when looking at the helicopter from the front (25 degrees, I believe), and offset at 90 degrees rotationally. I built a model of the mechanism in LEGO technic. It's really quite fascinating to look at 🙂
6 February 2021, 11:47