Wall
Wall
Jon Somerville
Pronounced Free-n-Easy not Frin-Essy. Airshow announcers sometimes got this wrong.
Pronounced Free-n-Easy not Frin-Essy. Airshow announcers sometimes got this wrong.
30 October, 20:05
October 29, 2024
October 23, 2024
Jon Somerville
wants this item
wants this item
Vought A-7E Corsair II The 'Sidewinders' in "The Final Countdown" Collection
HADmodels 1:48
48221 2022 23 October, 20:49
September 27, 2024
Jon Somerville
wants this item
wants this item
Japanese Navy Carrier-Based Aircraft Set Includes; 3 A6M2b Type 21, 6 B5N2 Type 97 w/Bombs or Torps. & 3 D3A1 Type 99
Hasegawa 1:350
72130 (QG30) 2008 New tool Multi-topic (3)27 September, 12:30
September 25, 2024
Jon Somerville
wants this item
wants this item
Photo Etch Tilly Crane Boom
Tom's Modelworks 1:350
3590 25 September, 15:46
September 18, 2024
September 5, 2024
August 21, 2024
August 20, 2024
August 2, 2024
July 31, 2024
June 17, 2024
June 12, 2024
Jon Somerville
wants this item
wants this item
Avon Sabre Drop Tank (100gal) for NAA / CAC Sabre kits
Red Roo Models 1:48
RRR48157 12 June, 22:22
May 30, 2024
May 9, 2024
April 30, 2024
April 29, 2024
April 25, 2024
Jon Somerville
Note: The Trumpeter 1/32 scale kit does not have the correct upgraded composite wings to build for these markings. This is the most wanted markings for me. 🙁
Note: The Trumpeter 1/32 scale kit does not have the correct upgraded composite wings to build for these markings. This is the most wanted markings for me. 🙁
25 April, 12:13
April 23, 2024
April 22, 2024
Jon Somerville
I designed this set and although included more triple barrel holders than were on the ship at the time the art work was done, it is not enough for Enterprise's final configuration. I miss Tom.
I designed this set and although included more triple barrel holders than were on the ship at the time the art work was done, it is not enough for Enterprise's final configuration. I miss Tom.
1 22 April, 14:06
April 18, 2024
April 15, 2024
April 12, 2024
March 20, 2024
March 8, 2024
March 7, 2024
February 21, 2024
February 14, 2024
February 12, 2024
February 7, 2024
February 5, 2024
January 25, 2024
Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.
All comments (10) » 1 19 April 2021, 15:43
Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.
19 December 2023, 13:44
Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.
25 January, 17:38
January 19, 2024
January 17, 2024
January 4, 2024
December 31, 2023
December 20, 2023
Jon Somerville
wants this item
wants this item
Canadian F-35 Lightning-II wheels, Armory, AW48305
Armory 1:48
AW48305 20 December 2023, 19:09
December 18, 2023
December 15, 2023
December 14, 2023
December 13, 2023
Jon Somerville
Added a new review for:
Added a new review for:
IJN Battleship Kongo October 1944 First Limited Edition w/Metal Barrels & Figures
Fujimi 1:350
60000 (600000) 2008 New tool 13 December 2023, 17:14
December 12, 2023
December 5, 2023
December 1, 2023
November 27, 2023
November 23, 2023
Jon Somerville
wants this item
wants this item
Remove Before Flight - US - Easy Belts
HGW Models 1:48
248034 23 November 2023, 18:28
Jon Somerville
wants this item
wants this item
P-51D Mustang - Seatbelts & Wooden floor 1/48
HGW Models 1:48
148563 23 November 2023, 18:26
November 21, 2023
November 17, 2023
November 14, 2023
November 7, 2023
November 3, 2023
wnolder.php?lang=en
2023-11-03 17:32:55
2017-03-22 14:32:43
31008
/ajax/wnolder.php?lang=en&sd=2023-11-03 17:32:55&md=2017-03-22 14:32:43&filter=&w=31008
todo