Soviet Heavy Tank SMK
Takom | No 2112 | 1:35
Факти
- Марка:
- Takom
- Наименование:
- Soviet Heavy Tank SMK
- Номер:
- 2112
- Мащаб:
- 1:35
- Тип:
- Пълен комплект
- В продажба:
- 2018 Нова матрица
- Баркод:
- 4897051421276 (EAN)
- Опаковка:
- Твърда кутия (с отварящ се капак)
- Тема:
- SMK » Танкове (Превозни средства)
Съдържание на кутията
Литник, Фотоец, Воден декал
Размери:
380x250x85 mm
(15x9.8x3.3 inch)
Тегло:
680 g (1.5 lbs)
Boxart, проектиран от Jason Wong
Хронология на продукта
Takom
2018
Инструкции
Изтегли 3680Kb (.pdf)
Пазар
Онлайн магазини
USD 45.49
В наличност »USD 47.99
В наличност »USD 51.21
В наличност »USD 51.69
В наличност »USD 62.96
В наличност »USD 51.66
Наличен »Покажи всички оферти » (15 общо)
Алтернативни SKU за Takom 2112:
TAK-2112 | TAK2112 | TAK02112 | TAKOM2112 | TAKO2112 | TAO2112
Забележка: Цените и наличността са индикативни. Проверете дали продуктът действително съвпада!
Свързани продукти
Main Armament for Soviet Heavy Tank SMK 1x76,2mm L-11, 1x45mm M1932 Takom
Aber 1:35
35L-275 2019 Нова матрица Преглед на съдържанието
Външни прегледи
Реклама
Всички отзиви » (10 общо)
Списания
Проекти
Галерия
Коментари
Ron Garcia
Given the size of the SMK, this is a very quick and easy kit to build. I thought the individual track links would be a pain but they practically fell together. All the running gear fits tightly without cement so you can easily drape the the tracks around them to add a slight sag. After it sets, you can then pop off the drive sprocket and idler wheel for easy painting of the tracks.
The only tricky part for me was the first few steps of the main turret construction. I would recommend cementing the two halves together and then attach the top at the same time. The instructions have you install the rear MG while cementing the two halves together. I found this fiddly. Plus, by adding the top at the same time as the two halves, it gives you wiggle room to adjust the fit of the assembly.
Though it doesn't say it, if you cut the brass wire in half, it will be the right length for both sides of the towing cable. Also, parts E7 and E8 require you to drape them under two A27 sections so don't assemble the cables ahead of time or you will have trouble.
Overall, a nice, unique, big early war tank. Because of the ease of construction, I would highly recommend it!
Given the size of the SMK, this is a very quick and easy kit to build. I thought the individual track links would be a pain but they practically fell together. All the running gear fits tightly without cement so you can easily drape the the tracks around them to add a slight sag. After it sets, you can then pop off the drive sprocket and idler wheel for easy painting of the tracks.
The only tricky part for me was the first few steps of the main turret construction. I would recommend cementing the two halves together and then attach the top at the same time. The instructions have you install the rear MG while cementing the two halves together. I found this fiddly. Plus, by adding the top at the same time as the two halves, it gives you wiggle room to adjust the fit of the assembly.
Though it doesn't say it, if you cut the brass wire in half, it will be the right length for both sides of the towing cable. Also, parts E7 and E8 require you to drape them under two A27 sections so don't assemble the cables ahead of time or you will have trouble.
Overall, a nice, unique, big early war tank. Because of the ease of construction, I would highly recommend it!
1 24 June 2022, 20:09