Newsfeed

Ian Doody
Ebay gluebomb restoration project. Stripped the built parts down and cleaned them up.The beginnings of paint up. So much more do. But fun bit next, painting metallics by hand, and weathering it.

Ian Doody
Just started to block in the aluminium tub colours, only added a watered down acrylic brown/black wash. Now I wait for it to dry, then ink wash, aluminium layer, then varnish, then another light brown wash.

Kyle DeHart
Off to a quick start. You'll have it looking great in no time.

Ian Doody
First ink wash, just to put some life into the aluminium. I'll dry brush another metallic layer over this, then varnish, the do some more washes. Not a quick process, mainly due to drying times, but it looks really good.

Ian Doody
That's it for today. Still very early stage, second ink wash. It will become more subdued as I continue with layering the aluminium. This is an acceptable beginning though.

Villiers de Vos
Very nice weathering.

Jv
Taking a seat I am interested in how you strip it down I bought a few glue booms myself and not sure how to get the glue of

Ian Doody
That's it for today, and for now on this project. I've lost inspiration and desire to work on it, so back in the box, until I feel inspired to do it again. Just not feeling it, and I don't want to muck it up. Added a varnish layer, fitted the foot pedals and fixed the hole in the tub wheel bay cover.

Ian Doody
Back to the big Ferrari. The cool thing about 70s Tamiya kits, is they gave you buildable tools. It's a screwdriver and wheel nut wrench. Nice.

Ian Doody
Not a lot happening at the moment, I'm doing a lot of sanding, glueing small parts, changing bolt heads on the rear of the gearbox and brakes, as these will be seen. I'll add and swap out bolts on the black crossmember, suspension brace, as its also quite noticable. Also drilled holes in the e haust brackets, for the retention springs, Just a quick dry fit too. Even unpainted the engine is an impressive piece of hand-built model engineering from Tamiya.

Mark D
Following this one! (Have the same one waiting (with a little less glue)

Ian Doody
Scratch built the rear brake air intake cooling scoop bracket. Mad? Me? Probably 😂 there is no line down the middle, it's the crappy silver plastic. It makes dark marks appear at joins and sprue attachment points. I'll putty over the intake, then paint it to look like the clear fibreglass, suitably weathered, with a piece of tape to lesson the amount of air reaching the brakes, just like on the real thing. Exciting things ahead 😉

Ian Doody
And, yes I'm going to put in brake lines.

Villiers de Vos
Very nice progress.

Ian Doody
That's it for today, just blocked in some colour, weathering and extra details tomorrow.

Kyle DeHart
Looking good Ian!

Ian Doody
Weeeell, that's all for today. I'm knackered. Pretty good progress, I've almost finished the 312T's Transverse gearbox, added the plumbing, detail and weathering paint, painted the brake airscoops, added nuts, and painted the suspension crossbeam. Only the anti-roll bar and a bracket still to fit. Bloody good fun that was.

Ian Doody
I think this might turn out rather good.

Ian Doody
As always, doesn't look like I've done anything at all today. Finished off the anti-roll bar and brackets, made a start on the left hand side suspension lower arm, swapped nuts out for better ones, wheel mount, drive shaft and shock absorber, also made a start on the rear wing mounting bracket and battery holder.

bmod
Definitely pulling up a chair to watch this one come along. 🙂 Looks great!

Ian Doody
Not a huge update, as I've had a few days away from modelling. Finished the coil springs on both sides and the right upright and drive shaft. Haven't got to finishing the anti-roll bar yet, as I'm changing the support rods for thinner wire, so it looks more in scale. More soon.

Dominik Weitzer
looks great!

Ian Doody
Back to working on the Tamiya 1/12 1975 Ferrari 312T. Today was just to get reacquainted with the kit, remember where I was, what I had planned, and where I'm going. Tested the fit of the rear wheels and tyres, everything is just friction fitted so far, a long way to go yet. That's how good Tamiya kits are, even forty eight year old kits fit together so well. Work will continue tomorrow with the rear anti-roll bar system, as im making the connecting rods more in scale. This is going to look awesome finished.

Villiers de Vos
Welcome back at the bench Ian.

Ian Doody
As usual not a lot new to see. With one thing or another I've been busy with other things recently. But back to the rear of the 312T. Finished the gearbox, and rear suspension, anti-roll bar adjusters. Replaced the kit parts with pins, for a finer appearance.

Ian Doody
Sloooow work continues on the 312T. The Ferrari Tipo 015, 2,992 cc (182.6 cu in), flat 12, naturally aspirated, engine is a mini kit in itself. Its going to be a complicated, Spaghetti wiring job, there's twelve wires for the fuel injection and twelve wires for the electrical ignition system. Then all the water and assorted pump plumbing. but it's going to look very cool. I am going to add a few things here and there, and I've sourced some air funnel mesh guards. Also I'll be assembling the Octopuss exhaust system of twelve pipes too. Proper Italian plumbing nightmare, but it is a Ferrari lol 😆 all this is just dry fitted for now.

Kyle DeHart
Going to be a stunning powerplant.

Ian Doody
Mixed bag of modelling today, shook sticks at a few different kits. As winter is approaching, looks like I've got Ships and F1 cars in my future. I've been putting the Ferrari off for months as I worked through my Sci-Fi backlog, soo work will commence on the 1975 world championship winning F1 car, my birth year. Doing the bodywork air-intake mod, and scratch building the fibreglass valve covers, plus adding a lot of missing details, wiring and plumbing, swapping nuts n bolts, scratching the accelerator assembly, and spray painting the final bodywork for the first time... a lot to do, but it'll look very cool.

Kyle DeHart
Excellent. It's definitely going to look very cool.

Ian Doody
It has been a whole year since I touched the 1975 Ferrari 312T, omg 😲 finally put paint down on the main case of the Flat 12 engine. More soon.

Ian Doody
Ferrari 312T Tipo 15 Flat 12 engine. Only made a tiny bit of progress today, first pump and hose. More weathering to come. Then fitting all the pipes, electrics, rear transverse gearbox and suspension, and the exhaust system, that all pretty much needs to be done at the same time.

Kyle DeHart
Lovely work Ian!!

Ian Doody
Making a start on the big 70s F1 GoodYears.

Kyle DeHart
Love it.

Guy Rump
Following. 👍

bughunter
After a health problem, I stopped modelling for a short time. I didn't want to continue the projects I had started because I wasn't in the mood for scratch modelling. I wanted to make a quick project - almost oob. Of course with a wooden propeller, because building one is just fun.
Working on two Pfalz D.IIIa (one as a triplane conversion) a long time ago was great fun and there was still a special kit waiting in my stash: a Limited Edition Dual Combo Pfalz D.III. No, I haven't forgotten the "a", this really is the forerunner of the D.IIIa. Eduard has re-released the D.IIIa kit often, but this Edition is from 2005 and was never released again. I hear some voices: Limited Editions are for collecting, not building. Never mind, I'm building the kit now!

I'm building the machine from the cover picture - and because there's a heart on it, I'm dedicating the build to my wife, who always supports me!

John
Looks great!

Nathan Dempsey
Following. Welcome back!

Kyle DeHart
Excellent to see you Frank!! I can't wait to follow along with this. Which is sure to be another beautiful build. Any edition…Limited, or otherwise sounds like something to build to me!! But maybe I'm doing things wrong. Ha!!

Erik
Zum Glück bist Du wieder fit! 👍
Sieht mal wieder klasse aus, die kleinen Steuerseile sind geil. 🙂

gorby
Looks like an interesting project Frank. I must admit that I don't know much about WWI aircraft and your builds are often a lesson about the real machines as well as a lesson in modelling.

Robert Podkoński
Taking a seat, of course!

bughunter
Thank you very much mates! Great to know that you are following 👍
Yeah Kyle, all kits can be build. But some collects rare kits as investment and hope to sell it later for higher prices. Once started the value goes near zero. But we have fun building them and that is invaluable!
@gorby You will see later that the Pfalz fighters are elegant planes!

Kyle DeHart
Indeed. I take a great pleasure in opening up and building valuable kits. I would be a really horrible collector. Lol.

Martin Oostrom
I have a few rare ones. But I'll gladly build them when the time comes. That's what kits are for!

KyMustang
Charming little airplane and great job on the build so far.

David Taylor
Watching.

Marcel Klemmer
I am in

Zbynek Honzik
Taking a seat!

Ben M
watching!

bughunter
A warm welcome to the show also for the new visitors!
I hope to have it ready for our next club meeting, so it will be a quick build (for my standards).

Michael Kohl
Good to see you back at the bench. I consider the Pfalz DIII one of the most elegant WWI planes and have two in my stash too. So I won't miss this build.
Keep it coming.

Kyle DeHart
The Pfalz really does have a lovely shape.

Zbynek Honzik
Good luck with Broplan! I keep my fingers crossed, I'll watch. Let there be enough motivation to complete this monster!

Łukasz Gliński
I'm in, being Broplan fan too 👍 Would love to buy Eurolot's 42-200 variant.
The cockpit looks great 👍

Paul
Following. Never built a Broplan kit (or any other vacform for that matter), but they have some unique subjects. I suppose the entire interior is scratchbuild? Pretty impressive!

Gordon Sørensen
Thats a lot of seats... but aren't they suppose to be Blue? Getting the decals from Arctic?

Oleg Bogolei
Interesting project. Following.

Chris Parsons
These images are 3-4 weeks old sorry. The model is basically completed (very close) today. I'll keep updating the pics here until they're up to date

Łukasz Gliński
Lovely progress, what livery?

Chris Parsons
Summit

Alex K
Great job! 👍

Julian Herrero aka Yuri
Good work , congrats

Paul
great result!

Juergen Klinglhuber
Great !! Love it.

Mirko Römer
Incredible effort - paying off. What a stunner!

Chris Parsons
Thank you very much guys!!

Łukasz Gliński
Missed the finish somehow, fantastic 👍

Zbynek Honzik
Now that's a heroic act indeed! Considering the quality of the kit, this is an absolutely amazing result! I completely missed finishing it, but luckily I just happened to come across this project.
Bravo Chris! You have my deepest respect! 👏👏👏

DuperScale
The result is awesome, Hope mine will be nearly as good

Neuling
Clean work!

Michael Kohl
Impressive result.

Transall NG
Huge work !!!!
I really love that !
Thanks !

S M
Bravo! Well done finishing a vacuformed kit!

Dutch
Chris, Terrific work finishing this beasty! Lovely results. I finally returned from my overseas travel and will check on the DHC-8 for you. Kind regards, Dutch

Kyle DeHart
Got going on this one. I know, I know, Top Gun plane, yawn. It's a birthday gift for my nephew. Quinta Studio goodies for the cockpit and ejector seats get us started. Really nice kit from academy!

bughunter
Oh something different on your bench. Watching!

Nicolas
Nice start, following.

J35J
Great start! Agree that the kit is very nice👍🏻

Kyle DeHart
Thank you gentlemen!! I'll get some new photos soon as I made some more progress.

Maciej Bellos
Watching!

Kyle DeHart
Thanks Maciej.

Pretty much have the airframe ready for some primer and paint

Kyle DeHart
Grey, grey and more grey. Paint work is nearly complete.

Kyle DeHart
This one is complete now. Sneak peak photo. I'll get more later.

bughunter
Picture 11 is very indecent! Poor jet. 😀😀
SCNR.

Nice work 👍

Patrick Hagelstein
😂😂😂

Kyle DeHart
Oh no Frank. 😂😂😂 Poor jet indeed. But I was afraid of tackiness on the paint still. 🤣🤣🤣

Eddie Mann
See 2 posts below.

Skyhiker
Eddie could you be more cryptic? What are you saying?